Your Price: $8.98
Save: $2.31
(20% Off $11.29)
Part # 2100010 2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 20 hrs 16 mins.
Your Price: $8.98
Save: $2.71
(23% Off $11.69)
Part # 2100013 2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 20 hrs 16 mins.
Your Price: $12.98
Save: $4.01
(23% Off $16.99)
Part # 2100030 2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 20 hrs 16 mins.
No Reviews  |  Write Review  |  Ask Question
Your Price: $16.98
Save: $4.11
(19% Off $21.09)
Part # 2100033 2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 20 hrs 16 mins.
Your Price: $20.98
Save: $5.01
(19% Off $25.99)
Part # 2100034 2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 20 hrs 16 mins.
Hurry! Only 1 left in stock
No Reviews  |  Write Review  |  Ask Question
Spring-Lock Base Repair Kit - Springfield Marine
Your Price: $21.42
Save: $8.07
(27% Off $29.49)
Part # 2100038 2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 20 hrs 16 mins.
Your Price: $5.98
Save: $1.21
(16% Off $7.19)
Part # 2100055 2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 20 hrs 16 mins.
Your Price: $5.98
Save: $1.01
(14% Off $6.99)
Part # 2100058 2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 20 hrs 16 mins.
No Reviews  |  Write Review  |  Ask Question
Your Price: $8.98
Save: $3.01
(25% Off $11.99)
Part # 2100077 2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 20 hrs 16 mins.
Trac-Lock II Handle & Pin, 2-3/8" - Springfield Marine
Your Price: $18.98
Save: $5.01
(20% Off $23.99)
Part # 2100099 2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 20 hrs 16 mins.
Hurry! Only 1 left in stock
Your Price: $6.98
Save: $2.71
(27% Off $9.69)
Part # 2171035 2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 20 hrs 16 mins.
Your Price: $7.98
Save: $2.61
(24% Off $10.59)
Part # 2171032 2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 20 hrs 16 mins.
Your Price: $7.98 (Out of stock)
Save: $2.21
(21% Off $10.19)
Part # 2171062 2nd Day Air for $2 More Eligible
No Reviews  |  Write Review  |  Ask Question
(Out Of Stock)
Low Price Guarantee
Replacement Trac-Lock Handle - Springfield Marine
Your Price: $4.98 (Out of stock)
Save: $1.91
(27% Off $6.89)
Part # 2171072 2nd Day Air for $2 More Eligible
(Out Of Stock)
Low Price Guarantee
Your Price: $19.98
Save: $9.51
(32% Off $29.49)
Part # 2100032 2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 20 hrs 16 mins.
Your Price: $10.98
Save: $4.41
(28% Off $15.39)
Part # 2171004 2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 20 hrs 16 mins.
Springfield
Whether you’re setting up a new seat pedestal system on your boat or repairing the existing one, you should have all the replacement parts in hand. Springfield Marine offers a range of high-quality replacement parts for your boat seat pedestal system. It includes bushing, handle, base repair kit, seat mount, handle and pin and track-lock handle. The base repair kit includes a bottle of glue with brush cap, plastic bushing and a wooden dowel mandrel.
  • Reliable replacement parts for Springfield Marine seat pedestal
  • Made of high-quality materials

Features of Springfield Marine Replacement Seat Pedestal Parts

  • Manf. Part # 2100010
    • Replacement bushing compatible with Spring-Lock™ systems
  • Manf. Part # 2100013
    • Replacement post bushing for For Spring-Lock™ systems 
  • Manf. Part # 2100030
    • 2-piece pedestal handle for replacement service part for Power-Rise Pedestals
  • Manf. Part # 2100033
    • Seat mount handle assembly. Replacement part for Trac-Lock™ seat mounts
  • Manf. Part # 2100034
    • U-stem handle assembly made of plastic and fits Trac-Lock™ Seat Mounts
  • Manf. Part # 2100038
    • Base repair kit includes 1/2" oz bottle of glue with brush cap, plastic bushing and wooden dowel mandrel
  • Manf. Part # 2100055 
    • Kingpin replacement base bushing is made of nylon and has a plastic base
  • Manf. Part # 2100058
    • Replacement seat mount spring for 7" x 7" swivels
  • Manf. Part # 2100077
    • Brass Replacement Bushing For KingPin™ Bases
  • Manf. Part # 2100095
    • Uni-lock Trac-Lock handle comes with pin
  • Manf. Part # 2171032 (2-3/8")  Manf. Part # 2171035 (2")
    • High-strength composite Hi-Lo bushing inserts into hi-lo seat swivel mount post end
  • Manf. Part # 2171062
    • Removable Air-Ride Handle. Replacement part for Power-Rise pedestals
  • Manf. Part # 2171072
    • Round Handle for current Trac-Lock™. Replacement part for Trac-Lock™ seat mounts

Full StarFull StarFull StarFull StarHalf Star
Based On 5 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
2 of 2
by Richard from Ogallala, Nebraska on April 29, 2015
must have BOTH bushings to re-do a springfield seat.
(0 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Spring-Lock seat mount busing
by Donald from Benton, Louisiana on October 27, 2014
Item did the job. Easy on line ordering and fast delivery.
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
What is this?
by Dan from Regina, Saskatchewan on October 08, 2014
iboats and product is great. shipping can be costly....
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
user
by Edgar from Mathis, Texas on July 21, 2014
solved the seat problem
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Spring Lock Purchase
by James from Livermore, California on August 20, 2011
Quick and easy order and delivered as promised!
(2 of 4 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Based On 3 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Spring-Lock Post Bushing
by James from Dayton, Ohio on November 04, 2015
Much to my amazement, I ordered the correct part, your web site was very easy to use and my part came within three days. Thank You
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
seat bushing 1 of 2
by Richard from Ogallala, Nebraska on April 29, 2015
must have BOTH bushings to fit springfield seats
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Just what I was looking for
by David from Canyon Lake, Texas on March 06, 2014
Perfect replacement for the worn insert on my original Springfield seat pedestal. Easy to replace and works perfectly.
(2 of 4 people found this review helpful)
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
Based On 3 Reviews | Write Review
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
These trac-locks are garbage. The threads strip in a week and you can throw them away.
by Jack from Slipthedicktome, New York on November 27, 2015
The threads will strip in a week and you can throw them away. If you order a pedestal make sure you get the one with the round knob to tighten the post so the seat won't swivel. The other style has a much thicker threaded metal post that won't strip.
(4 of 4 people found this review helpful)
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Stripped Threads
by William from Westford, Massachusetts on December 04, 2014
Aleady wrote this review, the threads were stripped on my handles.
(4 of 7 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
As Ordered
by Kevin from Nokomis, Florida on March 03, 2012
Great
(0 of 5 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Based On 4 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Easy Fix
by Phillip from Katy, Texas on June 29, 2016
This was a quick and easy fix. Included both tapered and straight bushings
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Base repair kit
by Connie from Taylorsville, Kentucky on March 23, 2016
Great service fast and easy I will use them in the future for my repair needs. Bobby
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
spring-lock base repair kit
by James from Panama City, Florida on January 15, 2014
haven't used it yet, but checks out ok, ordering and recieving was a-ok, will use again, thanx papaw
(1 of 4 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Repair kit needs a little repairing
by Jeffrey from Panama City, Florida on June 25, 2012
I purchased two of the repair kits, one worked as the instructions said. When I installed the other one, I had a problem with the new bushing wanting to come back out of the base. I had to wait for the glue to dry and trim the bushing. I think after looking back, the glue in one kit might haver been a little dry.
(6 of 8 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Based On 8 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Kingpin
by Allan from Flagler Beach, Florida on August 08, 2016
Exactly as advertised. Works well.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Perfect Fit
by Dean from Denver, Colorado on May 30, 2015
This replacement base bushing fits my 2005 Bass Tracker Pro Team 175 perfectly.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
kingpin
by Scott from Salesville, Arkansas on May 26, 2015
Just what I wanted.
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
kingpin replacement base bushing
by Marvin from columbia, Tennessee on April 01, 2015
Was exactly what I needed for the base on my 2005 bass tracker.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
wrong part
by Worth from Kannapolis, North Carolina on July 12, 2014
Even though I ordered the wrong part, you shipped what I ordered and it was what is was supposed to be. My fault, no complaints. Thanks.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Great fit 1995 Bass Tracker Pro Team 185
by Michael from Quinton, Virginia on June 01, 2014
These fit my Bass Tracker 1995 pro Team 185 perfect. Make sure the hole is good and clean. I used a brake hone to clean my hole good and then used a little WD-40 and drove then in with a piece of board and hammer. Shipping as always from Iboats was super fast.
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
good
by Gregory from Statenville, Georgia on November 30, 2013
good product, good price
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
good
by Gregory from Statenville, Georgia on November 20, 2013
good product
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
Based On 6 Reviews | Write Review
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
failure
by Robert from MT Zion, Illinois on June 14, 2016
orderd these replacement bushing to replace one that failed after4 years. the replacements are so badly made that they break after less than a day of fishing. the quality of these is very poor made in china. the bushing are way undersize which is making the fail.you should have to freeze these to install but they are so far under size you can just drop them in. very disappointed with this product.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Brass Bushing
by Leon from Harrison, Arkansas on May 05, 2015
this worked perfectly. If the bottom of your base is 1", as another customer has stated , just put it in your freezer for a couple of hours and drive er in. it's the old brass monkey idea.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
Very Brittle
by Wade from Panora, Iowa on July 16, 2014
these are cast brass I expected them to be durable I ordered 2 broke the first one into pieces putting it in. the second one i got in and broke after first use when i pulled out the seat guess i would recommend plastic instead
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
Not sure
by John from Sandsprings, Oklahoma on June 03, 2014
I installed these the way Springfield Marine said to do it. Put it in Fridge for couple of days, Let the Sun heat the boat part, then lay a 2X4 on it and drive it in. Evidently you must tap-tap-tap it in to keep from breaking it or else I got a bad part. I hammered mine in and the top broke into several pieces. Also for the front seat on my 1992 tracker Pro this bushing was about 1/4 inch too long and had to be cut off. The back seat appears to be different and it would probably work there. It's in there - and it works - and I ain't taking it out just because the top is gone - so I guess you can say it works. :) John
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
Good but not universal
by Ken from Grand Portage, Minnesota on July 04, 2013
These inserts are well made. Unfortunately, I didn't realize that my old seat base was from a different manufacturer and hence they do not fit for my application.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
nodsum
by Don from Norman, Oklahoma on July 21, 2012
I looked for these kingpins everywhere. Found them here on iboats.com. Quick, easy and fast shipment got the at my door. Thanks iboats.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
Based On 4 Reviews | Write Review
Full StarFull StarFull StarEmpty StarEmpty Star
Works
by Troy from Sioux Center, Iowa on May 29, 2016
Would have been nice to have some guidance on how to put the part on the seat. After messing around for a while I was able to get it, but directions might have made it quicker.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Seat handle
by Roger from Roseville, Minnesota on July 18, 2015
This unit is much better than the original....thicker, stronger, less likely to break.
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Trac-Lock II Handle Pin, 2-3/8" - Springfield Marine
by Garr from Roblin, Manitoba on July 13, 2015
I ordered two of these units. On one unit the pin was 2.00 inches instead of 2.35 inches. I reported to customer service, nothing has been done as of yet.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Perfect
by Michael from Elma, New York on July 16, 2014
Was exact part needed. Fit perfectly. Came in date promised
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Based On 2 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
For 1990 Fisher 3V a little modification needed!
by Shawn from Baytown, Texas on May 11, 2016
I used them on a 1990 fisher 3V bass boat! For the seat post that came on the boat, I had to trim down the inserts. other than that they will work great!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Hi-Lo Bushing
by Kevin from Jackson, Wisconsin on March 26, 2012
Product was as shown. Was shipped quickly. I realized I purchased the wrong size and customer service was extremely responsive and helpful with my return! Re-ordered the correct size and received them in a timely manner also. Thanks!
(4 of 9 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Based On 10 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Worked good
by Kenneth from New Franklin, Ohio on July 27, 2015
Perfect fit. You might want to use a dab of soap to help slide it into place because it is a tight fit, which is good because it wont slide out like the original one.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
fast shipping
by Paula from Columbia Falls, Montana on July 25, 2014
The first package came quickly but arrived while we were gone camping. The neighbor's dog chewed it to pieces. I ordered another one and it was sent right away. Thanks.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Bushing for Hi-Lo Pedestal
by Robert from Crystal River, Florida on June 09, 2014
Exactly what I needed and I was happy that I didn't have to buy the pedestal again. The bushing fits very tight and I was afraid to use force so I used a small file to shave it down a bit. After about five minutes, the bushing installed correctly with the use of a rubber hammer.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Hi-Lo Bushing for 2-3/8" Post - Springfield Marine
by Adam from Owensboro, Kentucky on December 12, 2013
better then the ones that came with the poles. long and heavy built. wont break as easy
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Quality Parts
by Robert from Roscoe, Illinois on November 10, 2013
high quality
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Lee
by Errol from Edmond, Oklahoma on August 28, 2013
Good
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
seat bushing
by Jack from Clearwater, Florida on August 06, 2013
Fit great Order came fast I will order my. Boat supplies from them again
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Hi-Lo 2 3/8" Bushing
by Richard from Maplewood, Minnesota on June 07, 2013
I inadvertently ordered the 2" Diam bushing and rec'd it within 3 days (reg. mail), but after opening realized it was the wrong size-My call to Customer Service corrected the problem w/o incident-My mistake, but GREAT SERVICE to correct problem!
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Item was as listed
by Charles from Ione, California on January 25, 2013
Product was as listed and shipping was fast
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Good product
by Kevin from Jackson, Wisconsin on April 13, 2012
Exactly as advertised
(0 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
Based On 1 Review | Write Review
Full StarFull StarFull StarEmpty StarEmpty Star
Picture not correct.
by Roberto from Miami, Florida on June 06, 2016
I was expecting the round handle as shown in the picture but instead received handle that was oval shaped.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull Star
Taper-Lock adapter.
by Gary from Lafayette, Louisiana on June 20, 2014
The adapter is just what I needed to mount my ski tote. Works Great.
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Based On 11 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Taper-Lock Replacement Post Bushing
by Deborah from Mound House, Nevada on July 25, 2016
This replacement works great! Nice to have the option to just replace the bushing rather than the entire post. Thanks!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Well-satisfied!
by Tom from Cavalier, North Dakota on July 05, 2016
The product was as advertised and just what I needed. And it got to me fast, fast, fast! Thanks for great service.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
I am satisfied!
by Robert from Canton, Ohio on June 16, 2016
This is now the 2nd time I've told you that I'm satisfied with the product I bought. When I need your service again, I will contact you. Thank you
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Excellent price and product.
by Pamela from Dothan, Alabama on June 06, 2016
No problems with product. It worked perfectly.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Great Replacement Part
by Michael from Marlborough, Massachusetts on April 27, 2016
Installed these on a worn-out part and they worked perfectly for me.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Great Product
by Dennis from Ashland, Ohio on August 27, 2015
Worked just like the original
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Finally! A perfect replacement!
by Joshua from Guntersville, Alabama on March 28, 2015
Instructions are easy to follow and worked perfectly. Instead of spending 70 bucks to replace the pedestal, this makes a quick replacement. I plan on redoing all of my seats soon.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Springfield Marine Taper Lock Replacement
by Charles from Skiatook, Oklahoma on November 13, 2014
The product arrived quickly and was easy to install.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Taper lock repair
by Tom from Cedar Falls, Iowa on August 06, 2014
Only issue I had was my original did not have a pop rivet to drill out like the instructions said. Not a big deal as I just beat it off going around and around the base carefully. It took quite a bit of beatings though. Otherwise all was good.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
worked great
by James from Andover, Minnesota on July 13, 2014
Fit worked as advertised
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
just what I needed
by Ryan from Moore, South Carolina on July 12, 2014
Perfect replacement for my busted bushing. Easy to install.
(1 of 1 people found this review helpful)
Was this review helpful?
Q:
Can you give me the od and id of bushing?
A:
The inner diameter is 0.75 inches. The outer diameter is 0.95 inches.


Q:
Length of bushing?
A:
The length of this bushing is 2.74 inches, according to Springfield.


Q:
What is O.D. ?
A:
The outer diameter varies between 0.994" to 1.020", according to Springfield.


Q:
Why is the inner diameter .785 and not .750 as stated?
A:
Not sure where you got inner diameter measurements because we don't have them. They are not even listed in Springfield's catalog. This is a replacement bushing for KingPin bases only.


Q:
Will this fit springfield power pole on ranger boats?


Q:
Can you tell me the diameter of this bushing?
A:
The diameter(s) on this bushing are as follows: Inner Diameter: 1.572 inches; Outer Diameter: 1.671 inches


Q:
What is outside diameter?
A:
The outer diameter size is 1.766 inches.


Q:
Can I get the bushing only without having to purchase the entire base repair kit (P/N 2100038)? Price and P/N?
A:
The bushings in #2100038 are not available separately.


Q:
Will it fit in place of the black Todd pedistal tightening knob?
A:
No this will only work with Springfield's pedestals.


Q:
Do you have a bushing that fits a 2 inch post?
A:
We do not list any. We will need to know the part number to your current pedestal to make sure we can special order the bushing. Call us at the number at the top of the page.


Q:
This is for the 2 3/8 post but will if fit in to the 9 inch taper lock surface mount?
A:
Yes as long as it is the taper lock base such as part number 1600003.


Q:
Is this bushing for a 2" dia. post?
A:
This is for the taper lock series which that post is 2-3/8".


Q:
Have taper-lock pedestals and pedestal comes loose from deck plate, what do I need to repair this?
A:
Without pictures of your set up we can't confirm how to fix it. It could be the part is worn down from use and just needs to be replaced to a brand new one.


Q:
Will this bushing fit a Kingpin threaded 6" X 8" base ?
A:
This bushing will fit both a threaded and non-threaded base.


Q:
Can you tell me what the dimensions on this bushing. OD? ID?
A:
The dimensions on this bushing are as follows: OD: 1 inch; ID: 0.77 inches


Q:
Is this bushing threaded?
A:
This bushing will fit both a threaded and non-threaded base.


Q:
How much glue to apply?
A:
Springfield recommends applying the glue in a cross pattern on the top and down the sides at 12 O'clock, 3 O'Clock, 6 O'Clock, and 9 O'Clock. the bottle contains .5 oz of glue. Springfield recommends using half of the glue provided.


Q:
What is the best way to remove the remaining bushing from the post hole without damaging the boat deck?
A:
That really depends because some posts are not removable from the base. If it is removable sometimes WD-40 would do the trick. If not there could be structural issues and we would recommend contacting your boat dealer or asking this question in our forums which connects you with thousands of boaters at http://forums.iboats.com/


Q:
I have a 2004 Ranger 210VS that uses a Springfield Powere Rise part # 1642008. Is this the kit I need to repair the pedestal so it will take the new pole? Old bushing is stuck on the old pole. Thanks.?
A:
This is just a repair kit to the base. If you need the post bushing then you need to get this bushing: http://www.iboats.com/Spring-Lock-Post-Bushing-Springfield-Marine/dm/view_id.342141


Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies