- Durable yellow polyurethane.
- Will not mark or discolor boat.
- Cut and abrasion resistant.
- Will not "flat spot" even after months of storage.
- Rollers are unaffected by grease, oil, gasoline, exhaust fumes, salt, etc.
- No bushings to pop out.
- Continuous bearings and reinforcing tubes (some Models) are completely enclosed in polyurethane.
- Shafts should be greased at installation.
 |
4" Keel Roller 5/8" hole - Stoltz
Part # RP4
- Durable yellow polyurethane.
- Will not mark or discolor boat.
- Cut and abrasion resistant.
- Will not "flat spot" even after months of storage.
- Rollers are unaffected by grease, oil, gasoline, exhaust fumes, salt, etc.
- No bushings to pop out.
- Continuous bearings and reinforcing tubes (some Models) are completely enclosed in polyurethane.
- Shafts should be greased at installation.
- Fits 4" wide bracket
- 5/8" hole
|
 |
5" Keel Roller 5/8" hole - Stoltz
Part # RP5
- Durable yellow polyurethane.
- Will not mark or discolor boat.
- Cut and abrasion resistant.
- Will not "flat spot" even after months of storage.
- Rollers are unaffected by grease, oil, gasoline, exhaust fumes, salt, etc.
- No bushings to pop out.
- Continuous bearings and reinforcing tubes (some Models) are completely enclosed in polyurethane.
- Shafts should be greased at installation.
- Fits 5" wide bracket
- 5/8" hole
|
 |
5-1/2" Keel Roller 5/8" hole - Stoltz
Part # RP504
- Durable yellow polyurethane.
- Will not mark or discolor boat.
- Cut and abrasion resistant.
- Will not "flat spot" even after months of storage.
- Rollers are unaffected by grease, oil, gasoline, exhaust fumes, salt, etc.
- No bushings to pop out.
- Continuous bearings and reinforcing tubes (some Models) are completely enclosed in polyurethane.
- Shafts should be greased at installation.
- Fits 5-1/2" wide bracket
- 5/8" hole
|
 |
7" Keel Roller 5/8" hole - Stoltz
Part # RP7
- Durable yellow polyurethane.
- Will not mark or discolor boat.
- Cut and abrasion resistant.
- Will not "flat spot" even after months of storage.
- Rollers are unaffected by grease, oil, gasoline, exhaust fumes, salt, etc.
- No bushings to pop out.
- Continuous bearings and reinforcing tubes (some Models) are completely enclosed in polyurethane.
- Shafts should be greased at installation.
- Fits 7" wide bracket
- 5/8" Hole.
|
 |
8" Keel Roller 5/8" hole - Stoltz
Part # RP8
- Durable yellow polyurethane.
- Will not mark or discolor boat.
- Cut and abrasion resistant.
- Will not "flat spot" even after months of storage.
- Rollers are unaffected by grease, oil, gasoline, exhaust fumes, salt, etc.
- No bushings to pop out.
- Continuous bearings and reinforcing tubes (some Models) are completely enclosed in polyurethane.
- Shafts should be greased at installation.
- Fits 8" Wide Bracket
- 5/8" Hole
|
 |
10" Keel Roller 5/8" Hole - Stoltz
Part # RP10
- Durable yellow polyurethane.
- Will not mark or discolor boat.
- Cut and abrasion resistant.
- Will not "flat spot" even after months of storage.
- Rollers are unaffected by grease, oil, gasoline, exhaust fumes, salt, etc.
- No bushings to pop out.
- Continuous bearings and reinforcing tubes (some Models) are completely enclosed in polyurethane.
- Shafts should be greased at installation.
- Fits 10" wide bracket
- 5/8" Hole
|
 |
12" Keel Roller 5/8" Hole - Stoltz
Part # RP12
- Durable yellow polyurethane.
- Will not mark or discolor boat.
- Cut and abrasion resistant.
- Will not "flat spot" even after months of storage.
- Rollers are unaffected by grease, oil, gasoline, exhaust fumes, salt, etc.
- No bushings to pop out.
- Continuous bearings and reinforcing tubes (some Models) are completely enclosed in polyurethane.
- Shafts should be greased at installation.
- Fits 12" wide bracket
- 5/8" Hole
|
 |
18" Keel Roller 5/8" Hole - Stoltz
Part # RP18
- Durable yellow polyurethane.
- Will not mark or discolor boat.
- Cut and abrasion resistant.
- Will not "flat spot" even after months of storage.
- Rollers are unaffected by grease, oil, gasoline, exhaust fumes, salt, etc.
- No bushings to pop out.
- Continuous bearings and reinforcing tubes (some Models) are completely enclosed in polyurethane.
- Shafts should be greased at installation.
- Fits 18" wide bracket
- 5/8" Hole
|
 |
4" Keel Roller 1/2" Hole - Stoltz
Part # RP45
- Durable yellow polyurethane.
- Will not mark or discolor boat.
- Cut and abrasion resistant.
- Will not "flat spot" even after months of storage.
- Rollers are unaffected by grease, oil, gasoline, exhaust fumes, salt, etc.
- No bushings to pop out.
- Continuous bearings and reinforcing tubes (some Models) are completely enclosed in polyurethane.
- Shafts should be greased at installation.
- Fits 4" wide bracket
- 1/2" Hole
|
No Review for 5" Keel Roller 5/8" hole - Stoltz
No Review for 5-1/2" Keel Roller 5/8" hole - Stoltz
No Review for 7" Keel Roller 5/8" hole - Stoltz
No Review for 10" Keel Roller 5/8" Hole - Stoltz
No Review for 4" Keel Roller 1/2" Hole - Stoltz
This product ships in 1 business day.
To determine the shipping cost and estimated delivery date for this item click Add to Cart, then click Calculate Shipping inside your shopping cart.
Standard Shipping Policies
|
