New 2012 Tahoe Pontoons
New 2013 Tahoe Pontoons
The construction of Tahoe Pontoon Boats begins with heavy duty 25" diameter first quality Aluminum pontoons. Tahoe Pontoon Boats do not require acid dipping to give them a consistent finish, they are of a consistent finish right from the start. All Classic Tahoe Pontoon Boats feature our EXCLUSIVE side keel protection and Integrated nose cone fins. Also EXCLUSIVE are our double full riser connections. These solid pieces of heavy duty extruded aluminum run the full length of the pontoon on the inside and outside providing the strongest connection from pontoon to deck. Tahoe Pontoon Boats EXCLUSIVE motor pod is engineered for today's heavy 4 stroke motors. It is stronger, thicker and double connected with 16 stainless steel 3/8" bolts. Check that against any brand!
Tahoe Pontoon Boats Classic models are built with 3" high .188 thickness "C" channel crossbeams that are bolted again with stainless steel 3/8" bolts to the double riser systems. Tahoe Pontoon Boats 3/4 marine decking is then Bolted to the crossbeams with stainless steel bolts, and locknuts. This crossbeam and deck construction is used only in the highest quality Top end models. Many competitors build what they call "Top end" models using 2" .125 thickness hat, "Z", or "C" channels that require extra crossbeams for support. They then tech screw the deck to the crossbeam. Although this type of construction is used on many less expensive pontoon boats, it is not the level of heavy duty construction expected for a top end model. Tahoe Pontoon Boats pontoon and crossbeam construction, and decking, carry a Limited lifetime warranty* The entire setup is then framed with heavy duty .090 anodized rub rail with a heavy duty rubber bumper (black so it doesn't show scuffing) insert, and then finished off with the heaviest EXCLUSIVE polished stainless steel corners on ALL 4 corners.
Inside, Tahoe Pontoon Boat models feature the industry's only EXCLUSIVE Aluminum seat base frames. These lifetime guaranteed* compartments feature the largest storage capacity and the only flow through ventilation available. Even when the compartment is closed and the cover is on, items under the seat bases are receiving airflow to dry the area and to help prevent mold and mildew
Tahoe Pontoon Boats Classic feature the tallest heaviest anodized wall railings to keep people more secure. Finger guards are provided at all gate openings. Trip hazards are eliminated by providing recessed pop up cleats, Docklights built into the walls, and no rail across the front deck. Tahoe Pontoon Boats nose cone fins are trimmed to reduce rough edges.
Tahoe Pontoon Boats models feature all of the following as STANDARD equipment - all the time
Garmin in Dash Color GPS with fishfinder, GPS speedometer and water temp.
Clarion CD Stereo with 4 high power speakers
MP3 input Jack
Deluxe Helmstand featuring an Automotive style, vinyl wrapped, wood grain dash, drop in cooler, Gauge package, lighted toggle switches, and quick release windshield
Polished Aluminum Tilt Steering wheel
Plush Reclining drivers chair with slide and swivel adjustment
Wine rack with 4 glasses and carafe
Plush embroidered furnishings made with Tahoe Pontoon Boats EASY TO CLEAN, MILDEW RESISTANT, puncture resistant, 50 gauge thickness EXCLUSIVE Matrix 50 vinyl.
Stainless Steel cup holders
28 oz designer Hi Lo carpet
Full Color matched Mooring Cover
Color Matched 10' Bimini top with Heavy Duty 1 1/4" framing, light, and quick release brackets.
Built in Halogen docking lights
Stainless Steel Boarding Ladder
Ergonomic table with locking table bases in fore and aft areas.
36 Gallon fuel system.
New Boat Financing Options and ToolsThere are many options and tools to help you get financed for your next new boat. Explore our tools and options for financing your boat.