Taylor Made
Save 100% Off.
Price: $25.99
(Out of stock)
Save: $21.02
(44% Off $47.01)
Part # 208959
2nd Day Air for $2 More Eligible
(Out Of Stock)
Price: $30.99
Save: $23.73
(43% Off $54.72)
Part # 208960
2nd Day Air for $2 More Eligible
Limited Sale Price: $0.00
(Item typically sold as part of a package. Inquire for price if purchasing separately.)
Save: $46.79
(100% Off $46.79)
Part # 371006
2nd Day Air for $2 More Eligible
(Discontinued)
Price: $18.99
Save: $14.11
(42% Off $33.10)
Part # 208961
2nd Day Air for $2 More Eligible

    Boat Cover Support Poles

  • Standard adjustable support pole. 36" to 64"
  • 3-in-1 support pole. 36" to 64"
  • 3-in-1 support pole. 22" to 59"
  • Boat Vent II (cover vent for ventilation)
Adjustable Boat Cover Support Pole - Taylor Made (works with VENT II)

Adjustable boat cover support pole extends from 36" to 64".

Extend the life of your cover by preventing water from pooling on top. Our standard boat cover support pole has a non-marring tip on each end of a telescoping aluminum tube. A durable plastic knob allows for easy adjustment of the height.

3-in-1 Super Support Pole (36" - 64") - Taylor Made

Super Support Pole extends from 36" to 64".

This fully adjustable support pole is 3 support poles in one! We supply a male canvas snap, a grommet tip, and a plain end cap with these Super Support Poles. So, if you have a female canvas snap or a grommet on you boat cover, you can get a support that will work with your cover. The pole is aluminum, with a durable plastic adjuster to set the correct height for your cover.

3-in-1 Super Support Pole (22" - 59") - Taylor Made
3-in-1 Super Support Pole

Super Support Pole extends from 22" to 59".

This fully adjustable support pole is 3 support poles in one! We supply a male canvas snap, a grommet tip, and a plain end cap with these Super Support Poles. So, if you have a female canvas snap or a grommet on you boat cover, you can get a support that will work with your cover. The pole is aluminum, with a durable plastic adjuster to set the correct height for your cover.

Boat Vent II (Support Pole not included) - Taylor Made

Don't let your interior suffer from mold and mildew damage. Proper ventilation can keep these boat destroying fungi from attacking your boat! The patented Boat Vent II installs quickly and easily, with no screws or fasteners. The venting area provides for greater volume of exhaust air while closing the top to bottom gap - keeping water out! The Boat Vent II is manufactured from a superior grade poly carbonate blend material for strength and UV resistance and will accommodate either 3/4" or 7/8" support poles. Sold Individually.

Full StarFull StarFull StarFull StarFull Star
good service and product
by Randy from Auburn, New Hampshire on June 20, 2016
good service and product
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Based On 3 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Support Pole
by Jeff from Grain Valley, Missouri on October 27, 2015
Easy to use. Light weight. My only complaint is the adjustment mechanism. I would rather had the push button with holes down the pole for the adjustment. This is a screw in adjuster with plastic hardware against aluminum. Other than that another quality piece from Taylor Made.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Taylor Made 3-1 Support Pole
by Peggy from Milford, Connecticut on October 04, 2013
We are waiting for the first heavy snow fall however, it has been great during the heavy rains.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Review for 3-in-1 Super Support Pole (36" - 64") - Taylor Made
by a Customer on September 17, 2008
(3 of 17 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Based On 8 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Great support pole
by James from North Branch, Minnesota on August 19, 2015
Very versatile and strong
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
3 in 1 support pole
by Ken from Waverly, Nebraska on May 13, 2015
Works fine.
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
3-in-1 Super Support Pole (22" - 59") - Taylor Made
by James from Dallas, Texas on May 10, 2015
Product does not fit the boat it as adverited to fit.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
good
by Michael from Peabody, Massachusetts on October 15, 2014
No problems would buy again
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Could be a little taller
by Kevin from Cooper City, Florida on May 05, 2014
For our 19 ft stingray it could use to be another 2-3 inches longer. Otherwise works good and stays on place.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Handy support pole
by Dan from Redding, California on October 23, 2013
Good product but would be nice if the air vent that goes through the cover attached to the pole better.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Boat cover suppoirt pole
by Jerry from Wesley Chapel, Florida on January 04, 2012
Easy to use and good quality.
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
super support pole 22to59"
by Jack from Florence, Kentucky on September 28, 2011
so far so good
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Based On 15 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Boat Cover Vent
by Ricky from Vancouver, Washington on December 10, 2016
Easy to install and easy to follow directions. I am expecting this to help keep the temperature right and the moisture from building up.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Boat vent
by Robert from Tecumseh, Michigan on June 29, 2016
So far so good. Hope it holds up season after season.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
No more gas smell
by Rebecca from Reston, Virginia on August 25, 2015
I use a cover for trailering, and it would reek of gas fumes before I started using this. I use just one, but for better results 2 or 3 would probably be ideal.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
boat cover vent
by John from Pinawa, Manitoba on April 28, 2015
Great thanks
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Great product
by Dan from Redding, California on October 23, 2013
Would be nice it the vent attached to the support pole better.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
For those who don't know...
by David from Cincinnati, Ohio on September 19, 2012
Guys, This system works great. I was one of the people who was worried about cutting holes in my brand new boat cover as well. All you have to do is ensure you cut the holes in the proper place. This means you will have to get into the boat with the cover over top and spend a little time to place the holes before cutting anything. Once you cut the holes in the proper spots, the black vent top is placed on the end of the support pole on the outside of the cover. Then put on the middle section of the vent onto the support pole from the inside and secure it with the provided plastic nut thing which screws on and tightens it from the inside. This will eliminate any movement where the plastic vent encases the boat cover. Now all you have to do is put the poles up. Btw, I believe this item is for replacement vents which are meant to be used with poles. I wouldn't use a vent without a support pole or you will have nothing but a vent that sags and allows water to seep into the boat when it rains. This works great when used properly.
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
(o:
by Judson from Cleveland, New York on September 06, 2012
EXCELLENT QUALITY .... VERY HAPPY AND PLEASED WITH PURCHASE.
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
boat vent
by Shane from Crystal, North Dakota on July 19, 2012
I know that it says support pole not included, but I think the vent and pole should be sold as one unit. The vent really does'nt work well without the pole. I think it should of recommended to purchase the pole at the same time and I would have. Until I get around to buying the pole all I have is a weight in the middle of my tarp. Thank you
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
boat cover
by John from Rhinelander, Wisconsin on June 29, 2012
the cover is a very durable one and the vents are going to work nice.
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Do NOT buy, it simply does not work
by Robert from Huntersville, North Carolina on March 27, 2012
I purchased this item along with a $700.00 cover and cover canopy support with nylon straps and I have spent most of my winter figuring out what went wrong. I will be returning all items for hopefully a full refund.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Good product. Shipping Costs too high
by Richard from Fall River, Nova Scotia on November 06, 2011
Shipping far too expensive.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Boat Vent
by Johannes from Wilmington, North Carolina on October 31, 2011
When I finally get the boat cover, I think the Boat Vent will work great.
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Just what it looks like
by Daniel from Colorado Springs, Colorado on June 06, 2011
Very easy to install, have some marine fabric glue for your ruff edges on the cover. Does what it says it will and actually vents.
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
No idea if it works
by David from Windsor, Connecticut on October 22, 2009
I bought the Boat Vent II with support pole at the same time I bought a new cover for my boat. Unfortunately, the vent comes with no instructions on its use. iboat.com customer service could offer no assistance on how to install it. (very disappointing they don't understand the products they sell.) Looking at Taylor Made's web site, it looks like I'm supposed to cut a hole in my brand new cover. There's no real instructions on the site on how to do this (the video is pretty useless). I assume there would be some reinforcement installed to avoid creating tear points where the hole has been cut, but none was provided with the vent. In summary, the Boat Vent II sits on the shelf, because I'm not cutting a hole in my brand new $500 cover without any assurance that I'm not destroying it.
(25 of 27 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Review for Boat Vent II (Support Pole not included) - Taylor Made
by a Customer on September 17, 2008
(1 of 15 people found this review helpful)
Was this review helpful?
Q:
Is there a video or a site where I can see exactley how this attaches to my cover?
A:
We can email you instructions if you contact us at the number at the top of the page.


Q:
Hi I wanted a cover along withthis pole?
A:
To find a cover for your boat, you'll need to visit our cover finder at: http://boatcovers.iboats.com/


Ask a question
Question & Answer Guidelines
This product ships in 4 to 7 business days.
Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies