These Bimini Tops are designed to mount within the confines of most wake board towers to provide shade for driver and spotter. All tops are 48" long and approximately 16" (from mounting point) and are available in three different widths to best fit most towers. Frame is constructed from bright dip anodized aluminum tubing and uses high quality marine grade hardware. Top features Ultima fabric for the best performance in strength, UV stability and longevity and is available in 8 popular colors.
Choosing the correct size top:
The tops will mount directly onto the tower frame at the center point, so pick the best position on the tower that will provide the best shade to the driver's seat. The tops are low profile at approximately 16" high at the maximum, so be sure that the position will keep the top high enough to clear the driver and spotter when seated. Measure across the tower at the mounting point that has been selected and choose the dimensions from below, noting the bimini width that matches your measured width on the tower. Check the width at the top and be sure that the angle of your tower will accommodate that dimension.
Width at Mount: 81" to 84", Width at Top: 73"
 |
Vinyl Bimini (with frame), White
Part # 62187
These Bimini Tops are designed to mount within the confines of most wake board towers to provide shade for driver and spotter. All tops are 48" long and approximately 16" (from mounting point) and are available in three different widths to best fit most towers. Frame is constructed from bright dip anodized aluminum tubing and uses high quality marine grade hardware. Top features Ultima fabric for the best performance in strength, UV stability and longevity and is available in 8 popular colors.
Choosing the correct size top:
The tops will mount directly onto the tower frame at the center point, so pick the best position on the tower that will provide the best shade to the driver's seat. The tops are low profile at approximately 16" high at the maximum, so be sure that the position will keep the top high enough to clear the driver and spotter when seated. Measure across the tower at the mounting point that has been selected and choose the dimensions from below, noting the bimini width that matches your measured width on the tower. Check the width at the top and be sure that the angle of your tower will accommodate that dimension.
Width at Mount: 81" to 84", Width at Top: 73"
|
 |
Ultima Bimini (with frame), Cadet Gray
Part # 62192
These Bimini Tops are designed to mount within the confines of most wake board towers to provide shade for driver and spotter. All tops are 48" long and approximately 16" (from mounting point) and are available in three different widths to best fit most towers. Frame is constructed from bright dip anodized aluminum tubing and uses high quality marine grade hardware. Top features Ultima fabric for the best performance in strength, UV stability and longevity and is available in 8 popular colors.
Choosing the correct size top:
The tops will mount directly onto the tower frame at the center point, so pick the best position on the tower that will provide the best shade to the driver's seat. The tops are low profile at approximately 16" high at the maximum, so be sure that the position will keep the top high enough to clear the driver and spotter when seated. Measure across the tower at the mounting point that has been selected and choose the dimensions from below, noting the bimini width that matches your measured width on the tower. Check the width at the top and be sure that the angle of your tower will accommodate that dimension.
Width at Mount: 81" to 84", Width at Top: 73"
|
 |
Ultima Bimini (with frame), Hunter Green
Part # 62191
These Bimini Tops are designed to mount within the confines of most wake board towers to provide shade for driver and spotter. All tops are 48" long and approximately 16" (from mounting point) and are available in three different widths to best fit most towers. Frame is constructed from bright dip anodized aluminum tubing and uses high quality marine grade hardware. Top features Ultima fabric for the best performance in strength, UV stability and longevity and is available in 8 popular colors.
Choosing the correct size top:
The tops will mount directly onto the tower frame at the center point, so pick the best position on the tower that will provide the best shade to the driver's seat. The tops are low profile at approximately 16" high at the maximum, so be sure that the position will keep the top high enough to clear the driver and spotter when seated. Measure across the tower at the mounting point that has been selected and choose the dimensions from below, noting the bimini width that matches your measured width on the tower. Check the width at the top and be sure that the angle of your tower will accommodate that dimension.
Width at Mount: 81" to 84", Width at Top: 73"
|
 |
Ultima Bimini (with frame), Black
Part # 62190
These Bimini Tops are designed to mount within the confines of most wake board towers to provide shade for driver and spotter. All tops are 48" long and approximately 16" (from mounting point) and are available in three different widths to best fit most towers. Frame is constructed from bright dip anodized aluminum tubing and uses high quality marine grade hardware. Top features Ultima fabric for the best performance in strength, UV stability and longevity and is available in 8 popular colors.
Choosing the correct size top:
The tops will mount directly onto the tower frame at the center point, so pick the best position on the tower that will provide the best shade to the driver's seat. The tops are low profile at approximately 16" high at the maximum, so be sure that the position will keep the top high enough to clear the driver and spotter when seated. Measure across the tower at the mounting point that has been selected and choose the dimensions from below, noting the bimini width that matches your measured width on the tower. Check the width at the top and be sure that the angle of your tower will accommodate that dimension.
Width at Mount: 81" to 84", Width at Top: 73"
|
 |
Ultima Bimini (with frame), Navy
Part # 62189
These Bimini Tops are designed to mount within the confines of most wake board towers to provide shade for driver and spotter. All tops are 48" long and approximately 16" (from mounting point) and are available in three different widths to best fit most towers. Frame is constructed from bright dip anodized aluminum tubing and uses high quality marine grade hardware. Top features Ultima fabric for the best performance in strength, UV stability and longevity and is available in 8 popular colors.
Choosing the correct size top:
The tops will mount directly onto the tower frame at the center point, so pick the best position on the tower that will provide the best shade to the driver's seat. The tops are low profile at approximately 16" high at the maximum, so be sure that the position will keep the top high enough to clear the driver and spotter when seated. Measure across the tower at the mounting point that has been selected and choose the dimensions from below, noting the bimini width that matches your measured width on the tower. Check the width at the top and be sure that the angle of your tower will accommodate that dimension.
Width at Mount: 81" to 84", Width at Top: 73"
|
 |
Ultima Bimini (with frame), Burgundy
Part # 62186
These Bimini Tops are designed to mount within the confines of most wake board towers to provide shade for driver and spotter. All tops are 48" long and approximately 16" (from mounting point) and are available in three different widths to best fit most towers. Frame is constructed from bright dip anodized aluminum tubing and uses high quality marine grade hardware. Top features Ultima fabric for the best performance in strength, UV stability and longevity and is available in 8 popular colors.
Choosing the correct size top:
The tops will mount directly onto the tower frame at the center point, so pick the best position on the tower that will provide the best shade to the driver's seat. The tops are low profile at approximately 16" high at the maximum, so be sure that the position will keep the top high enough to clear the driver and spotter when seated. Measure across the tower at the mounting point that has been selected and choose the dimensions from below, noting the bimini width that matches your measured width on the tower. Check the width at the top and be sure that the angle of your tower will accommodate that dimension.
Width at Mount: 81" to 84", Width at Top: 73"
|
 |
Ultima Bimini (with frame), Teal
Part # 62185
These Bimini Tops are designed to mount within the confines of most wake board towers to provide shade for driver and spotter. All tops are 48" long and approximately 16" (from mounting point) and are available in three different widths to best fit most towers. Frame is constructed from bright dip anodized aluminum tubing and uses high quality marine grade hardware. Top features Ultima fabric for the best performance in strength, UV stability and longevity and is available in 8 popular colors.
Choosing the correct size top:
The tops will mount directly onto the tower frame at the center point, so pick the best position on the tower that will provide the best shade to the driver's seat. The tops are low profile at approximately 16" high at the maximum, so be sure that the position will keep the top high enough to clear the driver and spotter when seated. Measure across the tower at the mounting point that has been selected and choose the dimensions from below, noting the bimini width that matches your measured width on the tower. Check the width at the top and be sure that the angle of your tower will accommodate that dimension.
Width at Mount: 81" to 84", Width at Top: 73"
|
 |
Ultima Bimini (with frame), Pacific Blue
Part # 62184
These Bimini Tops are designed to mount within the confines of most wake board towers to provide shade for driver and spotter. All tops are 48" long and approximately 16" (from mounting point) and are available in three different widths to best fit most towers. Frame is constructed from bright dip anodized aluminum tubing and uses high quality marine grade hardware. Top features Ultima fabric for the best performance in strength, UV stability and longevity and is available in 8 popular colors.
Choosing the correct size top:
The tops will mount directly onto the tower frame at the center point, so pick the best position on the tower that will provide the best shade to the driver's seat. The tops are low profile at approximately 16" high at the maximum, so be sure that the position will keep the top high enough to clear the driver and spotter when seated. Measure across the tower at the mounting point that has been selected and choose the dimensions from below, noting the bimini width that matches your measured width on the tower. Check the width at the top and be sure that the angle of your tower will accommodate that dimension.
Width at Mount: 81" to 84", Width at Top: 73"
|
No Review for Vinyl Bimini (with frame), White
No Review for Ultima Bimini (with frame), Cadet Gray
No Review for Ultima Bimini (with frame), Hunter Green
No Review for Ultima Bimini (with frame), Black
No Review for Ultima Bimini (with frame), Navy
No Review for Ultima Bimini (with frame), Burgundy
No Review for Ultima Bimini (with frame), Teal
No Review for Ultima Bimini (with frame), Pacific Blue
This product ships in 7 business days.
To determine the shipping cost and estimated delivery date for this item click Add to Cart, then click Calculate Shipping inside your shopping cart.
Standard Shipping Policies
Please be careful when ordering this product, it has limitations that differ from our General 30-day Return Policy. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends
- Bimini Tops
Bimini Tops are "made-to-order" and are thus specific to your order. However, we understand that sometimes a product you purchase just doesn't work out, which is why we want to make the return process as easy as possible for you. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends. A made-to-order bimini top may be returned within the first 30 days after shipment, but is subject to a 15-25% restocking fee. Odd-Lots, Liquidations, In-Stock Specials, Closeouts, EnduraTop Sunbrella Bimins, Striped Bimini Tops and customer requested alterations are non-returnable unless an error was made by iboats.com or by the bimini top manufacturer. Merchandise must be in new, unused condition with all original packaging in good condition; plus parts, accessories, manuals, and/or warranty cards included. You will need to receive a return authorization number (RA #) as well as instructions from our Customer Service Department.
Please note that each boat cover manufacturer may have additional requirements concerning product returns or warranty claims, including but not limited to: restocking fees, shipping fees, or product order change fees.
Because bimini tops are "made-to-order", there will be a $25-$50 fee for any bimini top order cancellation after 1 business day of purchase, as the bimini top has already gone into production. 30 days after the purchase date, the manufacturer of the product(s) will need to be contacted for a warranty claim. Canadian customers, please be careful when placing your order; iboats.com does not accept any return merchandise on Canadian orders unless the merchandise you received was defective, damaged, or an error was made by iboats.com. In such cases, please contact iboats.com Customer Service within 30 days of the original shipping date for a return authorization number. Returned items that do not have a RA # will not be accepted.
See our complete return policy.
|
