Taylor Made
Big B™ Boat Fender Hanger, 3-Pack - Taylor Made
Price: $10.22
Save: $3.73
(26% Off $13.95)
Part # 1085
2nd Day Air for $2.99 More Eligible
SHIPS TOMORROW!* if ordered in 18 hrs 48 mins.

Designed for use on Taylor Made fenders with 3/4" I.D. tubing. Maybe used on other brands, but due to variation among brands, the consumer must verify a tight enough fit between tube and product for proper function. Fits 3/8" diameter rope.

Big B Fender Hanger

Big B Fender Hanger Taylor Made Products

Here is a great video on the features and benefits of a Big B Fender by Taylor Made.... read more

Video Transcript

For years, if you want to hang our Big B center rope to fenders vertically, your options for hanging the fender is to run a rope down to the center and tie a knot off the bottom. Now not only is that they knot unsightly, has a potential for coming in tight, but in a lot of cases it’s in the water way too much and then you’re going to prematurely wear that rope out. Well, you know what? We’ve come up with a solution.

What we’ve come up with is the Big B rope lock. Rope lock is a two piece injection molded part made from nylon 66 so they last a long time up in the weather. And one side has barbs to capture the rope.

Now, the idea is, take your fender line, make you inflame the ends of it and so that it doesn’t fray. Lay it in to the one half of the Big B rope lock. Position the other half. Now those teeth on there are going to bite down into the rope to secure it and slide the rope in to the fender, start the rope lock into the center rope tube.

Now, these rope locks will work with any fender not just ours that has a three inch ID, three quarter inch ID insert tube. And then, push and twist until you’ve got the rope lock fully inserted into the end of the fender. Now there’s a hole molded into here so any water that accumulates on your rope or runs down through it will run right out of the bottom of the rope lock to keep your rope dry.

Okay, once it’s installed on your fender, the Big B rope lock gives you a clean, finish look on the bottom that will last for years and years.

read less
Full StarFull StarFull StarFull StarFull Star
Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull Star
Big B Boat Fender Hanger
by Bill from Hudsonville, Michigan on August 17, 2015
Product works as advertised. Highly recommended over tying knots on both ends of the fender line. Would not work if you hang fenders horizontally.
Was this review helpful?
Can this rope lock work in the Big B with a 1/4" rope line?
No it fits 3/8" diameter rope.

Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies