| Nominal Size |
Dial Range |
Sender Code |
Part Number |
Voltmeter
2 inch |
10-16 V |
Not Required |
80134P |
Ammeter, Direct Reading
2 inch |
60-0-60 |
Not Required |
80710P |
Fuel Gauge
2 inch |
E-1/2-F |
Requires F |
80150P |
Water Temperature, Electric
2 inch |
120-240F |
Requires D |
80590P |
Water Temperature, Electric
2 inch |
100-280F |
Requires E |
80593P |
Tach, Elect, Diesel Signaflex
3 inch |
0-3500 rpm |
Requires A |
82301P |
Oil Pressure, Electrical
2 inch |
0-80 psi |
Requires C |
80180P |
Polished stainless steel bezels with scratch resistant glass lenses. Classic white graphics on deep black faces. Designed for use with 12V DC negative ground systems. Dropping resistors are available for other voltages. Electrical gauges and tachometers feature rugged vector movements. Silicone dampened to prevent pointer bounce. Movements are magnetically shielded to eliminate magnetic interference from other gauges or instruments. Reverse polarity protection. Perimeter lighting for night use.
 |
2" Voltmeter, 10-16 Volts - Teleflex Marine
Part # 80134P
- Reverse polarity protection
- Perimeter lighting for night use
- Classic white graphics on deep black faces
- Silicone dampened to prevent pointer bounce
- Dropping resistors are available for other voltages
- Designed for use with 12V DC negative ground systems
- Polished stainless steel bezels with scratch resistant glass lenses
- Electrical gauges and tachometers feature rugged vector movements
- Movements are magnetically shielded to eliminate magnetic interference from other gauges or instruments
|
 |
2" Ammeter, Direct Read 60-0-60amp - Teleflex Marine
Part # 80710P
- Reverse polarity protection
- Perimeter lighting for night use
- Classic white graphics on deep black faces
- Silicone dampened to prevent pointer bounce
- Dropping resistors are available for other voltages
- Designed for use with 12V DC negative ground systems
- Polished stainless steel bezels with scratch resistant glass lenses
- Electrical gauges and tachometers feature rugged vector movements
- Movements are magnetically shielded to eliminate magnetic interference from other gauges or instruments
|
 |
2" Fuel Level Gauge - Teleflex Marine
Part # 80150P
- Reverse polarity protection
- Perimeter lighting for night use
- Classic white graphics on deep black faces
- Silicone dampened to prevent pointer bounce
- Dropping resistors are available for other voltages
- Designed for use with 12V DC negative ground systems
- Polished stainless steel bezels with scratch resistant glass lenses
- Electrical gauges and tachometers feature rugged vector movements
- Movements are magnetically shielded to eliminate magnetic interference from other gauges or instruments
|
 |
Water Temp, 120-240 F, Sender Required - Teleflex Marine
Part # 80590P
- Reverse polarity protection
- Perimeter lighting for night use
- Classic white graphics on deep black faces
- Silicone dampened to prevent pointer bounce
- Dropping resistors are available for other voltages
- Designed for use with 12V DC negative ground systems
- Polished stainless steel bezels with scratch resistant glass lenses
- Electrical gauges and tachometers feature rugged vector movements
- Movements are magnetically shielded to eliminate magnetic interference from other gauges or instruments
|
 |
3" Tach (Electric) 0-6000 Rpm - Teleflex Marine
Part # 82288P
- Reverse polarity protection
- Perimeter lighting for night use
- Classic white graphics on deep black faces
- Silicone dampened to prevent pointer bounce
- Dropping resistors are available for other voltages
- Designed for use with 12V DC negative ground systems
- Polished stainless steel bezels with scratch resistant glass lenses
- Electrical gauges and tachometers feature rugged vector movements
- Movements are magnetically shielded to eliminate magnetic interference from other gauges or instruments
|
 |
2" Oil Pressure, 0-80 Psi - Teleflex Marine
Part # 80180P
- Reverse polarity protection
- Perimeter lighting for night use
- Classic white graphics on deep black faces
- Silicone dampened to prevent pointer bounce
- Dropping resistors are available for other voltages
- Designed for use with 12V DC negative ground systems
- Polished stainless steel bezels with scratch resistant glass lenses
- Electrical gauges and tachometers feature rugged vector movements
- Movements are magnetically shielded to eliminate magnetic interference from other gauges or instruments
|
This product ships in 1 business day.
To determine the shipping cost and estimated delivery date for this item click Add to Cart, then click Calculate Shipping inside your shopping cart.
Standard Shipping Policies
