The easy to install upgrade to the most popular Rack and Pinion steering system in boating. Teleflex has applied its patented No Feedback technology to the incredible precision of a Rack and Pinion system, and engineered in serious advances in steering comfort and control. NFB Rack is suitable for most boats with single non-power assisted outboard engines up to V-6 and minimal engine flutter and steering instability.
How to Measure Steering Cables:
"Measure Twice. Order Once."
Replacement of existing Cable:
For Rotary steering cable replacement, measure existing cable as follows: Measure plastic cable jacket in inches, add 18", and round up to the next foot. Order that length cable.
For rack steering cable replacement, measure existing cable as follows: Measure plastic cable jacket in inches, add 30", and round up to the next foot. Order that length cable.
For New Installation: Measure cable routing path from wheel center to engine connection, as follows:
|
A = Center line of wheel to gunwale (or deck, if routed downward),
B = Dash to Transom,
C = Gunwale to centerline of cable connection at centered tiller.
For Cable Installations through Engine Tilt Tube:
Add A, B and C +6", then round up to the next foot. Order that lenth
cable.
For Cables Mounted to Transon, Splashwell or Stringer:
Add A, B and C, then subtract 6" and round up to the nest foot. Order
that length cable.
Cable routings (such as those found on pontoon boats) may vary
from this drawing. Confirm length by laying a garden hose along
cable path and measure run from wheel to engine connection point.
|
 |
NFB Rack Package, 10' - Teleflex Marine
Part # SS15110
- Fits boats up to 24'…non power assisted outboard
- Require a 2.25" Cutout
- Replaces standard Teleflex Rack without dash modification
- Precision Rack and Pinion steering
- Patented No-FeedBack technology
- 4.0 turns lock to lock
- Stainless steel telescopic ram
- Meets N.M.M.A. certification requirements & A.B.Y.C. standards
- Uses SS134XX series cable
Kit contains:- Nfb Rack Helm - SH5230P
- Rack Single Cable - SSC134XX -
{XX = cable lengh in feet. A 14' SSC134 would be SSC13414}
- Rack NFB Bezel - SB39544P
|
 |
NFB Rack Package, 11' - Teleflex Marine
Part # SS15111
- Fits boats up to 24'…non power assisted outboard
- Require a 2.25" Cutout
- Replaces standard Teleflex Rack without dash modification
- Precision Rack and Pinion steering
- Patented No-FeedBack technology
- 4.0 turns lock to lock
- Stainless steel telescopic ram
- Meets N.M.M.A. certification requirements & A.B.Y.C. standards
- Uses SS134XX series cable
Kit contains:- Nfb Rack Helm - SH5230P
- Rack Single Cable - SSC134XX -
{XX = cable lengh in feet. A 14' SSC134 would be SSC13414}
- Rack NFB Bezel - SB39544P
|
 |
NFB Rack Package, 12' - Teleflex Marine
Part # SS15112
- Fits boats up to 24'…non power assisted outboard
- Require a 2.25" Cutout
- Replaces standard Teleflex Rack without dash modification
- Precision Rack and Pinion steering
- Patented No-FeedBack technology
- 4.0 turns lock to lock
- Stainless steel telescopic ram
- Meets N.M.M.A. certification requirements & A.B.Y.C. standards
- Uses SS134XX series cable
Kit contains:- Nfb Rack Helm - SH5230P
- Rack Single Cable - SSC134XX -
{XX = cable lengh in feet. A 14' SSC134 would be SSC13414}
- Rack NFB Bezel - SB39544P
|
 |
NFB Rack Package, 13' - Teleflex Marine
Part # SS15113
- Fits boats up to 24'…non power assisted outboard
- Require a 2.25" Cutout
- Replaces standard Teleflex Rack without dash modification
- Precision Rack and Pinion steering
- Patented No-FeedBack technology
- 4.0 turns lock to lock
- Stainless steel telescopic ram
- Meets N.M.M.A. certification requirements & A.B.Y.C. standards
- Uses SS134XX series cable
Kit contains:- Nfb Rack Helm - SH5230P
- Rack Single Cable - SSC134XX -
{XX = cable lengh in feet. A 14' SSC134 would be SSC13414}
- Rack NFB Bezel - SB39544P
|
 |
NFB Rack Package, 14' - Teleflex Marine
Part # SS15114
- Fits boats up to 24'…non power assisted outboard
- Require a 2.25" Cutout
- Replaces standard Teleflex Rack without dash modification
- Precision Rack and Pinion steering
- Patented No-FeedBack technology
- 4.0 turns lock to lock
- Stainless steel telescopic ram
- Meets N.M.M.A. certification requirements & A.B.Y.C. standards
- Uses SS134XX series cable
Kit contains:- Nfb Rack Helm - SH5230P
- Rack Single Cable - SSC134XX -
{XX = cable lengh in feet. A 14' SSC134 would be SSC13414}
- Rack NFB Bezel - SB39544P
|
 |
NFB Rack Package, 15' - Teleflex Marine
Part # SS15115
- Fits boats up to 24'…non power assisted outboard
- Replaces standard Teleflex Rack without dash modification
- Precision Rack and Pinion steering
- Patented No-FeedBack technology
- 4.0 turns lock to lock
- Stainless steel telescopic ram
- Meets N.M.M.A. certification requirements & A.B.Y.C. standards
- Uses SS134XX series cable
Kit contains:- Nfb Rack Helm - SH5230P
- Rack Single Cable - SSC134XX -
{XX = cable lengh in feet. A 14' SSC134 would be SSC13414}
- Rack NFB Bezel - SB39544P
|
 |
NFB Rack Package, 16' - Teleflex Marine
Part # SS15116
- Fits boats up to 24'…non power assisted outboard
- Replaces standard Teleflex Rack without dash modification
- Precision Rack and Pinion steering
- Patented No-FeedBack technology
- 4.0 turns lock to lock
- Stainless steel telescopic ram
- Meets N.M.M.A. certification requirements & A.B.Y.C. standards
- Uses SS134XX series cable
Kit contains:- Nfb Rack Helm - SH5230P
- Rack Single Cable - SSC134XX -
{XX = cable lengh in feet. A 14' SSC134 would be SSC13414}
- Rack NFB Bezel - SB39544P
|
 |
NFB Rack Package, 17' - Teleflex Marine
Part # SS15117
- Fits boats up to 24'…non power assisted outboard
- Replaces standard Teleflex Rack without dash modification
- Precision Rack and Pinion steering
- Patented No-FeedBack technology
- 4.0 turns lock to lock
- Stainless steel telescopic ram
- Meets N.M.M.A. certification requirements & A.B.Y.C. standards
- Uses SS134XX series cable
Kit contains:- Nfb Rack Helm - SH5230P
- Rack Single Cable - SSC134XX -
{XX = cable lengh in feet. A 14' SSC134 would be SSC13414}
- Rack NFB Bezel - SB39544P
|
 |
NFB Rack Package, 18' - Teleflex Marine
Part # SS15118
- Fits boats up to 24'…non power assisted outboard
- Replaces standard Teleflex Rack without dash modification
- Precision Rack and Pinion steering
- Patented No-FeedBack technology
- 4.0 turns lock to lock
- Stainless steel telescopic ram
- Meets N.M.M.A. certification requirements & A.B.Y.C. standards
- Uses SS134XX series cable
Kit contains:- Nfb Rack Helm - SH5230P
- Rack Single Cable - SSC134XX -
{XX = cable lengh in feet. A 14' SSC134 would be SSC13414}
- Rack NFB Bezel - SB39544P
|
 |
NFB Rack Package, 19' - Teleflex Marine
Part # SS15119
- Fits boats up to 24'…non power assisted outboard
- Replaces standard Teleflex Rack without dash modification
- Precision Rack and Pinion steering
- Patented No-FeedBack technology
- 4.0 turns lock to lock
- Stainless steel telescopic ram
- Meets N.M.M.A. certification requirements & A.B.Y.C. standards
- Uses SS134XX series cable
Kit contains:- Nfb Rack Helm - SH5230P
- Rack Single Cable - SSC134XX -
{XX = cable lengh in feet. A 14' SSC134 would be SSC13414}
- Rack NFB Bezel - SB39544P
|
 |
NFB Rack Package, 20' - Teleflex Marine
Part # SS15120
Fits boats up to 24', non power assisted outboard. Replaces standard Teleflex Rack without dash modification. Precision Rack and Pinion steering, patented No-FeedBack technology. 4.0 turns lock to lock. Stainless steel telescopic ram. Meets N.M.M.A. certification requirements & A.B.Y.C. standards. Uses SSC134XX series cable.
|
This product ships in 1 business day.
To determine the shipping cost and estimated delivery date for this item click Add to Cart, then click Calculate Shipping inside your shopping cart.
Standard Shipping Policies
