 |
BRASS 3300 PIVOT KIT F/CH4400& - Teleflex Marine
Part # CA27563P
CA27563P - Heavy Duty Brass Pivot Kit.
|
 |
6400 BALL JOINT - Teleflex Marine
Part # CA28021P
- Thread 5/16"-24
- Cable 6400
- Stud 11/16"
|
 |
CONNECTOR FIT.3/8T X 3/8P-3/BG - Teleflex Marine
Part # HF5532
CONNECTOR FIT.3/8T X 3/8P-3/BG - part # HF5532
|
 |
GAUGE HOLE BLANKS 2" BLACK - Teleflex Marine
Part # 10860
Black. Fits all standard gauge holes (2"). Ideal cover up when a particular gauge is no longer needed.
|
 |
ELBOW TUBE FIT.1/4P (3/BG) - Teleflex Marine
Part # HF5538
ELBOW TUBE FIT.1/4P (3/BG)- part # HF5538
|
 |
WATER TEMP GAUGE LIDO - Teleflex Marine
Part # 65509P
LIDO 2" WATER TEMP GAUGE STERNDRIVE,INBOARD.
LIDO SERIES GAUGES.
Features include: Black graphics on a White face with chrome ring and a Black pointer with Fire-Orange tip. Scratch resistant curved glass lense with polished stainless steel, near-flush bezel. White perimeter and Red thru-dial lighting. *Sender Code: Code D-(Required). Water Temp-I/O, I/B, 120-240deg F
|
 |
CMD 290 90 BLACK BEZEL (292521 - Teleflex Marine
Part # 308559
Mfr: Sierra - 308559; Sierra, Replacement Bezel Kit. Angle: 90 Color: Black Replaces: Teleflex 292521 Use: w/ Command 290 System
|
 |
TRIM AND TILT SWITCH - Teleflex Marine
Part # 315590
Repl. Trim Switch F/ all SL-3 controls
|
 |
KE-4 Circuit Breaker, 20AMP - Teleflex Marine
Part # NJ0514-00
One actuator required per engine; controls both throttle and shift. Optional handheld controls, switch kit, harnesses, circuit breaker and buzzer.
|
 |
B/M Rack Cable, 16' - Teleflex Marine
Part # SSC13416
- Upgrade the new backmount rack to dual cable steering with only a cable change
- Works with either the SH5210P standard, or the SH5230P NFB backmount helms
- Will not work with older SH5097/5098 helms
- For 1-3/4" rack.
|
 |
KE-4 Power Harness, 10M - Teleflex Marine
Part # NM0414-33
- One control harness required per engine and station
- One comm harness required for twin engines
- Two power harnesses required per engine
|
 |
Control, Single, Side Mount, W/Trim - Teleflex Marine
Part # CH2700P
- This economical single lever, dual action control features universal styling, positive shift detents and easy installation
- It's an excellent replacement for both outboard and sterndrive controls using universal (3300/33 type) cables
- Available with or without trim controls in handle
|
 |
KE-4 Electronic Control Unit 12V - Teleflex Marine
Part # NM0477-00
One ECU required per engine.
|
 |
B/M Rack Cable, 12' - Teleflex Marine
Part # SSC13412
- Upgrade the new backmount rack to dual cable steering with only a cable change
- Works with either the SH5210P standard, or the SH5230P NFB backmount helms
- Will not work with older SH5097/5098 helms
- For 1-3/4" rack.
|
 |
Control, Single, Side Mount, W/o Trim - Teleflex Marine
Part # CH2600P
- This economical single lever, dual action control features universal styling, positive shift detents and easy installation
- It's an excellent replacement for both outboard and sterndrive controls using universal (3300/33 type) cables
- Available with or without trim controls in handle
|
 |
B/M Rack Cable, 17' - Teleflex Marine
Part # SSC13417
- Upgrade the new backmount rack to dual cable steering with only a cable change
- Works with either the SH5210P standard, or the SH5230P NFB backmount helms
- Will not work with older SH5097/5098 helms
- For 1-3/4" rack.
|
 |
Tach Wiring Harness, OMC - Teleflex Marine
Part # IH14767
- 3 wire plug
- BIA color-coded
- Eliminates field wiring problems
- Permits fast installation of tachometer
- For Teleflex Tachometers to connect thru the engine manufacturers remote throttle and shift control box (where applicable)
|
 |
Master Kit, Aluminum - Teleflex Marine
Part # SA27256P
Master kits for outboard motors include Clamp Block, Clevis kit and Support tube. Available with aluminum or stainless steel components. As well as component parts that make up these kits.
|
 |
B/M Rack Cable, 14' - Teleflex Marine
Part # SSC13414
- Upgrade the new backmount rack to dual cable steering with only a cable change
- Works with either the SH5210P standard, or the SH5230P NFB backmount helms
- Will not work with older SH5097/5098 helms
- For 1-3/4" rack.
|
 |
B/M Rack Cable, 18' - Teleflex Marine
Part # SSC13418
- Upgrade the new backmount rack to dual cable steering with only a cable change
- Works with either the SH5210P standard, or the SH5230P NFB backmount helms
- Will not work with older SH5097/5098 helms
- For 1-3/4" rack.
|
 |
B/M Rack Cable, 15' - Teleflex Marine
Part # SSC13415
- Upgrade the new backmount rack to dual cable steering with only a cable change
- Works with either the SH5210P standard, or the SH5230P NFB backmount helms
- Will not work with older SH5097/5098 helms
- For 1-3/4" rack.
|
 |
KE-4 Actuator - Throttle & Shift - Teleflex Marine
Part # NM0165-00
- One actuator required per engine; controls both throttle and shift
- Optional handheld controls, switch kit, harnesses, circuit breaker and buzzer
|
 |
KE-4 Sync Switch Kit - Teleflex Marine
Part # NJ0524-00
One actuator required per engine; controls both throttle and shift. Optional handheld controls, switch kit, harnesses, circuit breaker and buzzer.
|
 |
Trim Gauge, Mar/Merc, Volvo DP/SX, Yam'01 - Teleflex Marine
Part # 57905P
Amega Domed (Black Bezel) features clean-looking black dials with vivid white and red graphics. These instruments have through-dial and perimeter lighting for great readability. Dimensions: 2".
|
 |
Remote Helm Fill Kit - Teleflex Marine
Part # HA5450
- For use in ALL Teleflex SeaStarŽ Hydraulic Systems
- Not for use with former Teleflex hydraulic systems, except the SyTenŽ System, for outboards only
|
 |
B/M Rack Cable, 19' - Teleflex Marine
Part # SSC13419
- Upgrade the new backmount rack to dual cable steering with only a cable change
- Works with either the SH5210P standard, or the SH5230P NFB backmount helms
- Will not work with older SH5097/5098 helms
- For 1-3/4" rack.
|
 |
B/M Rack Cable, 13' - Teleflex Marine
Part # SSC13413
- Upgrade the new backmount rack to dual cable steering with only a cable change
- Works with either the SH5210P standard, or the SH5230P NFB backmount helms
- Will not work with older SH5097/5098 helms
- For 1-3/4" rack.
|
 |
B/M Rack Cable, 20' - Teleflex Marine
Part # SSC13420
- Upgrade the new backmount rack to dual cable steering with only a cable change
- Works with either the SH5210P standard, or the SH5230P NFB backmount helms
- Will not work with older SH5097/5098 helms
- For 1-3/4" rack.
|
 |
KE-4 Control Head Single Lever - Teleflex Marine
Part # NM0511-00
Works with any engine: - outboard, sterndrive or inboard
- Single or twin engine control; dual function for each lever
- Optional hand-held remote control; great for docking
- Built-in station selection switch
- Built-in overload protection and diagnostics
- Visual failure alarm standard (audio alarm optional)
- Uses standard 33C type control cables on throttle/shift actuator, or 3300 Miracables
- 12 or 24 Volt Capability
|
Based On 1 Review
