 |
BRASS 3300 PIVOT KIT F/CH4400& - Teleflex Marine
Part # CA27563P
CA27563P - Heavy Duty Brass Pivot Kit.
|
 |
6400 BALL JOINT - Teleflex Marine
Part # CA28021P
- Thread 5/16"-24
- Cable 6400
- Stud 11/16"
|
 |
BOX SIDE MOUNT CONTROL - Teleflex Marine
Part # CH2600P
Features
• Single lever, dual action for throttle & shift.
• Surface mount design for quick, tidy installation.
• Includes neutral warm up capability.
• Includes hardware for two 3300/33 control cables.
• Positive shift detents and neutral lock- out.
• Optional engine trim switch in handle. (CH2700)
• Optional neutral safety switch.
• Weather resistant exterior, rugged die cast frame.
• Meets/exceeds all applicable industry standards.
• Can be used in a dual station application with the DS unit and TFXTREME control cables
|
 |
BOXSIDE MOUNT CONTROL W/TRIM - Teleflex Marine
Part # CH2700P
Universal Side Mount Control with Trim Switch is an economical single lever,dual function control with positive shift detents and Trim switch in the handle. Mounts to gunwale surface, no hole cutout required. Can be used on virtually all single-station outboard and stern drives with mechanical shift. Utilizes the 3300/33c type "universal" control cables.
|
 |
FILL & VENT PLUG KIT - Teleflex Marine
Part # HA5450
Will facilitate filling and purging of steering system at a more convenient and accessible area than at a helm pump. Contains thru-dash fitting, waterproof vent plug, elbow fittings and 18" of vinyl tube.
|
 |
CONNECTOR FIT.3/8T X 3/8P-3/BG - Teleflex Marine
Part # HF5532
CONNECTOR FIT.3/8T X 3/8P-3/BG - part # HF5532
|
 |
J/E-Outboard TACHOMETER HARNESS* - Teleflex Marine
Part # IH14767
TACHOMETER WIRING HARNESS MERCURY / OMC 3 Wire plug.
|
 |
TRANS.MASTER CONN-KIT-ALUM* - Teleflex Marine
Part # SA27256P
For all inboard and most outboard motor installations. Includes clamp block, clevis kit and support tube.
|
 |
GAUGE HOLE BLANKS 2" BLACK - Teleflex Marine
Part # 10860
Black. Fits all standard gauge holes (2"). Ideal cover up when a particular gauge is no longer needed.
|
 |
ELBOW TUBE FIT.1/4P (3/BG) - Teleflex Marine
Part # HF5538
ELBOW TUBE FIT.1/4P (3/BG)- part # HF5538
|
 |
1-600602 COMP STRT ADAPTER,1/4"P-3/8" - Teleflex Marine
Description
Competition Starter Adapter 1/4 P 3/8
|
 |
15' CABLE TILT TRIM - Teleflex Marine
Part # SSC13415
An ideal replacement for most other systems. For boats up to 24' and wheels up to 16". Direct replacement for Morse, OMC and Detmar.
|
 |
BACK MT RACK SINGLE CABLE 12' - Teleflex Marine
Part # SSC13412
- Upgrade the new backmount rack to dual cable steering with only a cable change
- Works with either the SH5210P standard, or the SH5230P NFB backmount helms
- Will not work with older SH5097/5098 helms
|
 |
BACK MT RACK SINGLE CABLE 13' - Teleflex Marine
Part # SSC13413
- Upgrade the new backmount rack to dual cable steering with only a cable change
- Works with either the SH5210P standard, or the SH5230P NFB backmount helms
- Will not work with older SH5097/5098 helms
|
 |
BACK MT RACK SINGLE CABLE 14' - Teleflex Marine
Part # SSC13414
- Upgrade the new backmount rack to dual cable steering with only a cable change
- Works with either the SH5210P standard, or the SH5230P NFB backmount helms
- Will not work with older SH5097/5098 helms
|
 |
BACK MT RACK SINGLE CABLE 16' - Teleflex Marine
Part # SSC13416
- Upgrade the new backmount rack to dual cable steering with only a cable change
- Works with either the SH5210P standard, or the SH5230P NFB backmount helms
- Will not work with older SH5097/5098 helms
|
 |
BACK MT RACK SINGLE CABLE 17' - Teleflex Marine
Part # SSC13417
- Upgrade the new backmount rack to dual cable steering with only a cable change
- Works with either the SH5210P standard, or the SH5230P NFB backmount helms
- Will not work with older SH5097/5098 helms
|
 |
BACK MT RACK SINGLE CABLE 18' - Teleflex Marine
Part # SSC13418
- Upgrade the new backmount rack to dual cable steering with only a cable change
- Works with either the SH5210P standard, or the SH5230P NFB backmount helms
- Will not work with older SH5097/5098 helms
|
 |
BACK MT RACK SINGLE CABLE 19' - Teleflex Marine
Part # SSC13419
- Upgrade the new backmount rack to dual cable steering with only a cable change
- Works with either the SH5210P standard, or the SH5230P NFB backmount helms
- Will not work with older SH5097/5098 helms
|
 |
BACK MT RACK SINGLE CABLE 20' - Teleflex Marine
Part # SSC13420
- Upgrade the new backmount rack to dual cable steering with only a cable change
- Works with either the SH5210P standard, or the SH5230P NFB backmount helms
- Will not work with older SH5097/5098 helms
|
 |
SPEEDOMETER 50 MPH TYPE XL - Teleflex Marine
Part # IG75013
SPEEDOMETER 50 MPH TYPE XL
|
 |
CLAMP BRACKET-30 SERIES - Teleflex Marine
Part # 021600
Products Gauges cables Controls Control Mounts Plugs
|
 |
WATER TEMP GAUGE LIDO - Teleflex Marine
Part # 65509P
LIDO 2" WATER TEMP GAUGE STERNDRIVE,INBOARD.
LIDO SERIES GAUGES.
Features include: Black graphics on a White face with chrome ring and a Black pointer with Fire-Orange tip. Scratch resistant curved glass lense with polished stainless steel, near-flush bezel. White perimeter and Red thru-dial lighting. *Sender Code: Code D-(Required). Water Temp-I/O, I/B, 120-240deg F
|
 |
TRIM GAUGE - Teleflex Marine
Representative Photo
Part # 57905P
Trim, Mariner/Merc, Yamaha (2001).
Smart White and Red graphics on a Black dial background, these very low profile bezels follow the curve of the lens to eliminate water trapping. Design with domed glass
sheds water and resists scratching.
|
 |
CYL PURGE TUBE W/QUICK DISCON. - Teleflex Marine
Part # KF99
CYL PURGE TUBE W/QUICK DISCON.
|
 |
CIRCUIT BREAKER 20AMP - Teleflex Marine
Part # NJ051400
KE4 Circuit Breaker, 20A
|
 |
KE-4 Sync Switch Kit - Teleflex Marine
Part # NJ052400
KE-4 Synchronizer Switch Kit
|
 |
KE-4 ACTUATOR - Teleflex Marine
Part # NM016500
KE-4 Actuator Throttle + Shift
|
 |
KE-4 POWER HARNESS - Teleflex Marine
Part # NM041433
KE-4 Power Supply Harness
|
 |
KE-4 CONTROL SINGLE HEAD - Teleflex Marine
Part # NM051100
KE-4 Single Control
|
 |
CMD 290 90 BLACK BEZEL (292521 - Teleflex Marine
Part # 308559
Mfr: Sierra - 308559; Sierra, Replacement Bezel Kit. Angle: 90 Color: Black Replaces: Teleflex 292521 Use: w/ Command 290 System
|
 |
CONTROL UNIT - Teleflex Marine
Part # NM047700
KE-4 Control Unit 12V
|
 |
TRIM AND TILT SWITCH - Teleflex Marine
Part # 315590
Repl. Trim Switch F/ all SL-3 controls
|
