The Rack - the most popular Rack & Pinion system in boating. It's just right for power steered boats in which No Feedback systems are not required. The helm incorporates an extruded profile pinion gear that engages a pre-assembled rack and cable, driving an armored-standard core for minimized steering effort.
How to Measure Steering Cables:
"Measure Twice. Order Once."
Replacement of existing Cable:
For Rotary steering cable replacement, measure existing cable as follows: Measure plastic cable jacket in inches, add 18", and round up to the next foot. Order that length cable.
For rack steering cable replacement, measure existing cable as follows: Measure plastic cable jacket in inches, add 30", and round up to the next foot. Order that length cable.
For New Installation: Measure cable routing path from wheel center to engine connection, as follows:
|
A = Center line of wheel to gunwale (or deck, if routed downward),
B = Dash to Transom,
C = Gunwale to centerline of cable connection at centered tiller.
For Cable Installations through Engine Tilt Tube:
Add A, B and C +6", then round up to the next foot. Order that length
cable.
For Cables Mounted to Transon, Splashwell or Stringer:
Add A, B and C, then subtract 6" and round up to the nest foot. Order
that length cable.
Cable routings (such as those found on pontoon boats) may vary
from this drawing. Confirm length by laying a garden hose along
cable path and measure run from wheel to engine connection point.
|
 |
Rack Package, 8' - Teleflex Marine
Part # SS14108
Features:- Standard 3/4" tapered shaft
- 4 turns lock-to-lock for standard travel
- Optional wedge kits offer mounting flexibility
- Exceeds A.B.Y.C. safety standards and N.M.M.A. certification requirements
Applications: - Boats up to 24'
- Steering wheels up to 16"
- Single and Dual Engines
- Small Cruisers
- Outboard Runabouts
- Bass Boats
- Jet Boats
- Pontoon Boats
- Houseboats.
- Uses SS134XX series cable.
Kit contains
- Back Mount Rack Helm (single/dual)SH5210P
- Back Mount Bezel (90º) SB39526P
- Back Mount Rack Single Cable SSC134XX
|
 |
Rack Package, 9' - Teleflex Marine
Part # SS14109
Features:- Standard 3/4" tapered shaft
- 4 turns lock-to-lock for standard travel
- Optional wedge kits offer mounting flexibility
- Exceeds A.B.Y.C. safety standards and N.M.M.A. certification requirements
Applications: - Boats up to 24'
- Steering wheels up to 16"
- Single and Dual Engines
- Small Cruisers
- Outboard Runabouts
- Bass Boats
- Jet Boats
- Pontoon Boats
- Houseboats.
- Uses SS134XX series cable.
Kit contains
- Back Mount Rack Helm (single/dual)SH5210P
- Back Mount Bezel (90º) SB39526P
- Back Mount Rack Single Cable SSC134XX
|
 |
Rack Package, 10' - Teleflex Marine
Part # SS14110
Features:- Standard 3/4" tapered shaft
- 4 turns lock-to-lock for standard travel
- Optional wedge kits offer mounting flexibility
- Exceeds A.B.Y.C. safety standards and N.M.M.A. certification requirements
Applications: - Boats up to 24'
- Steering wheels up to 16"
- Single and Dual Engines
- Small Cruisers
- Outboard Runabouts
- Bass Boats
- Jet Boats
- Pontoon Boats
- Houseboats.
- Uses SS134XX series cable.
Kit contains
- Back Mount Rack Helm (single/dual)SH5210P
- Back Mount Bezel (90º) SB39526P
- Back Mount Rack Single Cable SSC134XX
|
 |
Rack Package, 11' - Teleflex Marine
Part # SS14111
Features:- Standard 3/4" tapered shaft
- 4 turns lock-to-lock for standard travel
- Optional wedge kits offer mounting flexibility
- Exceeds A.B.Y.C. safety standards and N.M.M.A. certification requirements
Applications: - Boats up to 24'
- Steering wheels up to 16"
- Single and Dual Engines
- Small Cruisers
- Outboard Runabouts
- Bass Boats
- Jet Boats
- Pontoon Boats
- Houseboats.
- Uses SS134XX series cable.
Kit contains
- Back Mount Rack Helm (single/dual)SH5210P
- Back Mount Bezel (90º) SB39526P
- Back Mount Rack Single Cable SSC134XX
|
 |
Rack Package, 12' - Teleflex Marine
Part # SS14112
Features:- Standard 3/4" tapered shaft
- 4 turns lock-to-lock for standard travel
- Optional wedge kits offer mounting flexibility
- Exceeds A.B.Y.C. safety standards and N.M.M.A. certification requirements
Applications: - Boats up to 24'
- Steering wheels up to 16"
- Single and Dual Engines
- Small Cruisers
- Outboard Runabouts
- Bass Boats
- Jet Boats
- Pontoon Boats
- Houseboats.
- Uses SS134XX series cable.
Kit contains
- Back Mount Rack Helm (single/dual)SH5210P
- Back Mount Bezel (90º) SB39526P
- Back Mount Rack Single Cable SSC134XX
|
 |
Rack Package, 13' - Teleflex Marine
Part # SS14113
Features:- Standard 3/4" tapered shaft
- 4 turns lock-to-lock for standard travel
- Optional wedge kits offer mounting flexibility
- Exceeds A.B.Y.C. safety standards and N.M.M.A. certification requirements
Applications: - Boats up to 24'
- Steering wheels up to 16"
- Single and Dual Engines
- Small Cruisers
- Outboard Runabouts
- Bass Boats
- Jet Boats
- Pontoon Boats
- Houseboats.
- Uses SS134XX series cable.
Kit contains
- Back Mount Rack Helm (single/dual)SH5210P
- Back Mount Bezel (90º) SB39526P
- Back Mount Rack Single Cable SSC134XX
|
 |
Rack Package, 14' - Teleflex Marine
Part # SS14114
Features:- Standard 3/4" tapered shaft
- 4 turns lock-to-lock for standard travel
- Optional wedge kits offer mounting flexibility
- Exceeds A.B.Y.C. safety standards and N.M.M.A. certification requirements
Applications: - Boats up to 24'
- Steering wheels up to 16"
- Single and Dual Engines
- Small Cruisers
- Outboard Runabouts
- Bass Boats
- Jet Boats
- Pontoon Boats
- Houseboats.
- Uses SS134XX series cable.
Kit contains
- Back Mount Rack Helm (single/dual)SH5210P
- Back Mount Bezel (90º) SB39526P
- Back Mount Rack Single Cable SSC134XX
|
 |
Rack Package, 15' - Teleflex Marine
Part # SS14115
Features:- Standard 3/4" tapered shaft
- 4 turns lock-to-lock for standard travel
- Optional wedge kits offer mounting flexibility
- Exceeds A.B.Y.C. safety standards and N.M.M.A. certification requirements
Applications: - Boats up to 24'
- Steering wheels up to 16"
- Single and Dual Engines
- Small Cruisers
- Outboard Runabouts
- Bass Boats
- Jet Boats
- Pontoon Boats
- Houseboats.
- Uses SS134XX series cable.
Kit contains
- Back Mount Rack Helm (single/dual)SH5210P
- Back Mount Bezel (90º) SB39526P
- Back Mount Rack Single Cable SSC134XX
|
 |
Rack Package, 16' - Teleflex Marine
Part # SS14116
Features:- Standard 3/4" tapered shaft
- 4 turns lock-to-lock for standard travel
- Optional wedge kits offer mounting flexibility
- Exceeds A.B.Y.C. safety standards and N.M.M.A. certification requirements
Applications: - Boats up to 24'
- Steering wheels up to 16"
- Single and Dual Engines
- Small Cruisers
- Outboard Runabouts
- Bass Boats
- Jet Boats
- Pontoon Boats
- Houseboats.
- Uses SS134XX series cable.
Kit contains
- Back Mount Rack Helm (single/dual)SH5210P
- Back Mount Bezel (90º) SB39526P
- Back Mount Rack Single Cable SSC134XX
|
 |
Rack Package, 17' - Teleflex Marine
Part # SS14117
Features:- Standard 3/4" tapered shaft
- 4 turns lock-to-lock for standard travel
- Optional wedge kits offer mounting flexibility
- Exceeds A.B.Y.C. safety standards and N.M.M.A. certification requirements
Applications: - Boats up to 24'
- Steering wheels up to 16"
- Single and Dual Engines
- Small Cruisers
- Outboard Runabouts
- Bass Boats
- Jet Boats
- Pontoon Boats
- Houseboats.
- Uses SS134XX series cable.
Kit contains
- Back Mount Rack Helm (single/dual)SH5210P
- Back Mount Bezel (90º) SB39526P
- Back Mount Rack Single Cable SSC134XX
|
 |
Rack Package, 18' - Teleflex Marine
Part # SS14118
Features:- Standard 3/4" tapered shaft
- 4 turns lock-to-lock for standard travel
- Optional wedge kits offer mounting flexibility
- Exceeds A.B.Y.C. safety standards and N.M.M.A. certification requirements
Applications: - Boats up to 24'
- Steering wheels up to 16"
- Single and Dual Engines
- Small Cruisers
- Outboard Runabouts
- Bass Boats
- Jet Boats
- Pontoon Boats
- Houseboats.
- Uses SS134XX series cable.
Kit contains
- Back Mount Rack Helm (single/dual)SH5210P
- Back Mount Bezel (90º) SB39526P
- Back Mount Rack Single Cable SSC134XX
|
 |
Rack Package, 19' - Teleflex Marine
Part # SS14119
Features:- Standard 3/4" tapered shaft
- 4 turns lock-to-lock for standard travel
- Optional wedge kits offer mounting flexibility
- Exceeds A.B.Y.C. safety standards and N.M.M.A. certification requirements
Applications: - Boats up to 24'
- Steering wheels up to 16"
- Single and Dual Engines
- Small Cruisers
- Outboard Runabouts
- Bass Boats
- Jet Boats
- Pontoon Boats
- Houseboats.
- Uses SS134XX series cable.
Kit contains
- Back Mount Rack Helm (single/dual)SH5210P
- Back Mount Bezel (90º) SB39526P
- Back Mount Rack Single Cable SSC134XX
|
 |
Rack Package, 20' - Teleflex Marine
Part # SS14120
Features:- Standard 3/4" tapered shaft
- 4 turns lock-to-lock for standard travel
- Optional wedge kits offer mounting flexibility
- Exceeds A.B.Y.C. safety standards and N.M.M.A. certification requirements
Applications: - Boats up to 24'
- Steering wheels up to 16"
- Single and Dual Engines
- Small Cruisers
- Outboard Runabouts
- Bass Boats
- Jet Boats
- Pontoon Boats
- Houseboats.
- Uses SS134XX series cable.
Kit contains
- Back Mount Rack Helm (single/dual)SH5210P
- Back Mount Bezel (90º) SB39526P
- Back Mount Rack Single Cable SSC134XX
|
This product ships in 1 business day.
To determine the shipping cost and estimated delivery date for this item click Add to Cart, then click Calculate Shipping inside your shopping cart.
Standard Shipping Policies
Based On 4 Reviews
