Tie Down Engineering Dock Hardware

DOCK HDW (N) HEX HEAD 8/BAG - Tie Down Engineering
Your Price: $33.68
Save: $9.71
(22% Off $43.39)
Part # 24279
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
LAG BOLT W/WASH 3/8X 2-8/BG - Tie Down Engineering
Your Price: $7.12
Save: $1.87
(20% Off $8.99)
Part # 24287
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
DOCK HDW LAG BOLT 3/8X3 8/BAG - Tie Down Engineering
Your Price: $9.06
Save: $2.63
(22% Off $11.69)
Part # 24289
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
DOCK HDW LAG BOLT 3/8X5 8/BAG - Tie Down Engineering
Your Price: $12.42
Save: $3.57
(22% Off $15.99)
Part # 24292
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
O/S CORNER MALE 10 - Tie Down Engineering
Your Price: $32.95
Save: $9.54
(22% Off $42.49)
Part # 25491
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
HD OUTSIDE CORNER (FEMALE) INA - Tie Down Engineering
Your Price: $40.70
Save: $11.79
(22% Off $52.49)
Part # 26400
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
HD OUTSIDE CORNER (END) INCIN - Tie Down Engineering
Your Price: $24.65
Save: $7.14
(22% Off $31.79)
Part # 26402
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
HD INSIDE CORNER INDIN - Tie Down Engineering
Your Price: $24.42
Save: $7.07
(22% Off $31.49)
Part # 26403
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
HDINSIDE CORNER 3IN INEIN - Tie Down Engineering
Your Price: $61.06
Save: $17.63
(22% Off $78.69)
Part # 26404
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
HD INSIDE CORNER 2IN INEIN - Tie Down Engineering
Your Price: $56.93
Save: $16.46
(22% Off $73.39)
Part # 26405
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
HD ANGLE INFIN - Tie Down Engineering
Your Price: $7.35
Save: $2.14
(22% Off $9.49)
Part # 26406
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
FEMALE T CONNECTOR INGIN - Tie Down Engineering
Your Price: $25.27
Save: $7.32
(22% Off $32.59)
Part # 26407
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
MALE T CONNECTOR INHIN - Tie Down Engineering
Your Price: $18.37
Save: $5.32
(22% Off $23.69)
Part # 26408
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
WASHER PLATE INIIN - Tie Down Engineering
Your Price: $2.60
Save: $0.79
(23% Off $3.39)
Part # 26409
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
CHAIN HOLDER INJIN - Tie Down Engineering
Your Price: $40.70
Save: $11.79
(22% Off $52.49)
Part # 26410
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
PIPE HOLDER INKIN - Tie Down Engineering
Your Price: $33.81
Save: $9.78
(22% Off $43.59)
Part # 26411
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
HD PIPE HOLDER HOOP - Tie Down Engineering
Your Price: $95.58
Save: $27.61
(22% Off $123.19)
Part # 26412
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
BACK UP PLATE - Tie Down Engineering
Your Price: $6.50
Save: $1.89
(22% Off $8.39)
Part # 26413
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
ROLLER ONLY - Tie Down Engineering
Your Price: $67.26
Save: $19.43
(22% Off $86.69)
Part # 26414
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
HD PLATE HOOP ROLLER - Tie Down Engineering
Your Price: $212.78
Save: $61.41
(22% Off $274.19)
Part # 26415
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
HD DECK PLATE - Tie Down Engineering
Your Price: $74.02
Save: $21.37
(22% Off $95.39)
Part # 26416
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
PILE CHAIN HOLDER - Tie Down Engineering
Your Price: $100.25
Save: $29.04
(22% Off $129.29)
Part # 26419
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
HD PLATE HOOP ROLLER 14IN - Tie Down Engineering
Your Price: $180.83
Save: $53.34
(22% Off $234.17)
Part # 26423
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
INSIDE ROLR RAMP BRKT 1 PR/PK - Tie Down Engineering
Your Price: $120.42
Save: $30.77
(20% Off $151.19)
Part # 26431
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
OUTSIDE CORNER (FEMALE) - Tie Down Engineering
Your Price: $34.22
Save: $9.87
(22% Off $44.09)
Part # 26521
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
CHAIN HOLDER - Tie Down Engineering
Your Price: $32.18
Save: $9.31
(22% Off $41.49)
Part # 26529
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
CONNECTOR PIN SET - Tie Down Engineering
Your Price: $8.98
Save: $2.61
(22% Off $11.59)
Part # 26531
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
DOCK HDW (M) CAR.BOLT SET 8/BG - Tie Down Engineering
Your Price: $7.60
Save: $2.19
(22% Off $9.79)
Part # 26534
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
DOCK HDW CAR BOLT SETINMIN 8/B - Tie Down Engineering
Your Price: $18.75
Save: $5.44
(22% Off $24.19)
Part # 26535
SHIPS TOMORROW!* if ordered in 15 hrs 3 mins.
No Reviews | Write Review
Tie Down Engineering
Tie Down Engineering Dock Hardware
    A variety of different mounts and related hardware
DOCK HDW (N) HEX HEAD 8/BAG - Tie Down Engineering
N. Includes lock nut. Used to connect male and female connectors. Galvanized 3/4" X 3-1/2".
LAG BOLT W/WASH 3/8X 2-8/BG - Tie Down Engineering
Bolt and flat washer hot dip galvanized used to attach flotation drums to dock system.
DOCK HDW LAG BOLT 3/8X3 8/BAG - Tie Down Engineering
DOCK HDW LAG BOLT 3/8X3 8/BAG - Tie Down Engineering
Bolt and flat washer hot dip galvanized used to attach flotation drums to dock system.
DOCK HDW LAG BOLT 3/8X5 8/BAG - Tie Down Engineering
DOCK HDW LAG BOLT 3/8X5 8/BAG - Tie Down Engineering
Bolt and flat washer hot dip galvanized used to attach flotation drums to dock system.
O/S CORNER MALE 10 - Tie Down Engineering
B. One 1/2" welded tab. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set (N) or connector pin (O). Each leg is 10"L x 5" H.
HD OUTSIDE CORNER (FEMALE) INA - Tie Down Engineering
A. Two 1/2" welded tabs. Use with a male outside corner. Each leg is 10"L x 5"H.
HD OUTSIDE CORNER (END) INCIN - Tie Down Engineering
C. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 10"L x 5"H.
HD INSIDE CORNER INDIN - Tie Down Engineering
D. Should be used with one of the outside corners. Each leg has elongated holes for easy fit and is 8-1/4"L x 5"H.
HDINSIDE CORNER 3IN INEIN - Tie Down Engineering
E. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Requires carriage bolt set ?M? for attaching.
HD INSIDE CORNER 2IN INEIN - Tie Down Engineering
E. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Requires carriage bolt set ?M? for attaching.
HD ANGLE INFIN - Tie Down Engineering
F. Should be used for all cross supports. Each leg 2-1/2"L x 5"H.
FEMALE T CONNECTOR INGIN - Tie Down Engineering
G. Two welded 1/2" tabs. Bolts to side of dock to attach fingers and ramps. 5"L x 5"H.
MALE T CONNECTOR INHIN - Tie Down Engineering
MALE T CONNECTOR INHIN - Tie Down Engineering
H. One welded 1/2" tab. Use with Female T connector to attach fingers and ramps. 5"L x 5"H. Bolt set ?N? required for joint.
WASHER PLATE INIIN - Tie Down Engineering
I. Should be used with every Angle. Two required for each Angle. 1-1/2"L x 5"H.
CHAIN HOLDER INJIN - Tie Down Engineering
J. Bolts to side of dock. Use weights and chain to hold dock in place. Accommodates 1/4" 3/8" and 1/2" chain. 5"L x 5"H.
PIPE HOLDER INKIN - Tie Down Engineering
K. Bolts to outside of dock. Uses 2" pipe to hold dock in place. Carriage bolt set ?M? required for attaching.
HD PIPE HOLDER HOOP - Tie Down Engineering
R & S. Heavy duty piling hoop for pilings up to 12" in diameter. The hoop is constructed of 1-1/2" pipe and is hot dip galvanized. It can be bolted directly to the side of the dock or to the optional deck plate. Commercial grade.
BACK UP PLATE - Tie Down Engineering
Q. Reinforcing plates are used to back up single T males and females. 5" x 5".
ROLLER ONLY - Tie Down Engineering
Heavy duty roller assembly. Bracket and roller bolt directly to the deck plate ( # 26416). An aid to the up and down motion of the dock in areas of tidal action. 6" roller turns on a 5/8" diameter shaft. 3/4" bracket is hot-dipped galvanized.
HD PLATE HOOP ROLLER - Tie Down Engineering
Piling hoop & roller intended for areas with a lot of wind current or tidal action. Combines the Piling hoop (# 26412) and roller assembly (# 26414) to make up for the up and down movement. For pilings up to 12" in diameter. Galvanized.
HD DECK PLATE - Tie Down Engineering
Heavy duty roller assembly. Bracket and roller bolt directly to the deck plate ( # 26416). An aid to the up and down motion of the dock in areas of tidal action. 6" roller turns on a 5/8" diameter shaft. 3/4" bracket is hot-dipped galvanized.
PILE CHAIN HOLDER - Tie Down Engineering
For use as a pile holder with 3/8" galvanized chain and shackles. Can be adjusted for various pile diameters.
HD PLATE HOOP ROLLER 14IN - Tie Down Engineering
14" Commercial grade steel. The piling hoop secures around the piling while roller permits smooth up and down movement.
INSIDE ROLR RAMP BRKT 1 PR/PK - Tie Down Engineering
5" x 11" x 1/4" galvanized steel bracket Includes left and right ramp brackets Description Commercial Grade
OUTSIDE CORNER (FEMALE) - Tie Down Engineering
A. Two 1/2" welded tabs. Use with a male outside corner. Each leg is 10"L x 5"H.
CHAIN HOLDER - Tie Down Engineering
J. Bolts to side of dock. Use weights and chain to hold dock in place. Accommodates 1/4" 3/8" and 1/2" chain. 5"L x 5"H.
CONNECTOR PIN SET - Tie Down Engineering
P. Used for quick disconnect of male and female connectors. Galvanized 3/4" connector pin and hitch clip pin.
DOCK HDW (M) CAR.BOLT SET 8/BG - Tie Down Engineering
Used to attach A thru K component parts. 3/8 x 2-1/2" bolt flat washer and nut. Hot dipped galvanized. Commercial grade 1/2" x 3".
DOCK HDW CAR BOLT SETINMIN 8/B - Tie Down Engineering
Used to attach A thru K component parts. 3/8 x 2-1/2" bolt flat washer and nut. Hot dipped galvanized. Commercial grade 1/2" x 3".
This product ships in 1 business day.

Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
* Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies
Great Boating Days are Ahead!
Enjoy Extra Discounts 5-20% Off During the SPRING SAVINGS SALE!
Great Boating Days are Ahead!
Enjoy Extra Discounts 5-20% Off During the SPRING SAVINGS SALE!