Uflex
Price: $155.93
Save: $34.56
(18% Off $190.49)
Part # B49
2nd Day Air for $2.99 More Eligible
Price: $155.93
Save: $34.56
(18% Off $190.49)
Part # B47
2nd Day Air for $2.99 More Eligible

The Uflex Side Mount Dual Lever Control is designed for use on all outboard engines. Made of nylon fiberglass, for long lasting performance. It features two levers made of anodized aluminum for superior durability. These levers have separate controls for throttle and shift.

  • Nylon fiberglass construction
  • Anodized aluminum levers
  • Ideal for all outboard engines

This lever control can be installed either in left or right hand side.

Features of Uflex Side Mount Dual Lever Control:

  • Nylon fiberglass construction
  • Anodized aluminum levers
  • Ideal for all outboard engines
  • Left or right side mount installation

Specifications:

Manf. Part # B49

  • Color: Black

Manf. Part # B47

  • Color: Light Grey
Black Dual Lever Control - Uflex
Side Mount Dual Lever Control, Black - Uflex
  • Suitable for all outboard engines
  • Made of nylon fiberglass with anodized aluminum levers
  • Left or right side mount installation
  • For use with Teleflex engine control cables: CC205 with K23 connection kit; CC170 with K24 connection kit; CC172, CC633 with K25 connection kit; CC179 without connection kit
White Dual Lever Control - Uflex
Side Mount Dual Lever Control, Light Grey - Uflex
  • Suitable for all outboard engines
  • Made of nylon fiberglass with anodized aluminum levers
  • Left or right side mount installation
  • For use with Teleflex engine control cables: CC205 with K23 connection kit; CC170 with K24 connection kit; CC172, CC633 with K25 connection kit; CC179 without connection kit
Full StarFull StarFull StarFull StarFull Star
Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull Star
Control box cables
by Roy from Martins Ferry, Ohio on August 12, 2017
Everyone I dealt with fantastic to deal with. Would definitely do business with them again
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Based On 2 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Good Product
by Trent from Merrill, New York on August 01, 2011
Relatively easy to mount and install, it gets the job done.
(12 of 16 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Review for Side Mount Dual Lever Control, White - Uflex
by a Customer on February 05, 2009
amazing services, fast delivery, very very good job, THX
(25 of 48 people found this review helpful)
Was this review helpful?
Q:
Would this work and what cables would I need for E70ELCTE?
A:
Yes this will work, you will need C14X and the length you need. You will also need K23 connection kit.


Q:
I have a 1985 Johnson 15Hp Sailmaster. I have the NOS Johnson remote kit, part number 393053. What cables and connection kit will I need with the Uflex Side Mount Dual Lever Control?
A:
You will need C14XX (you need to know length) and get the K23 connection kit.


Q:
Can you tell me what cables I would use for a 2006 Mercury 9.9 outboard?
A:
This is for use with SeaStar engine control cables: CC205 with K23 connection kit; CC170 with K24 connection kit; CC172, CC633 with K25 connection kit; CC179 without connection kit. The CC179 is Mercury cables so you do need a connection kit.


Q:
How hard is this unit to hook up to a 15hp evenrude on a 15 ft jon boat 2015 model with electric start?
A:
Not too bad if you already have the remote set up (more adaptations needed if converting tiller to remote, must contact technician). You will just need the C14X cables and whatever length you need. Then you will also need to order the K23 connection kit. Keep in mind this is a dual lever/single function meaning that one lever controls throttle and one lever controls shift.


Q:
I have a 2016 evenrude 15hp electric start with tiller I would like to covert it using your uflex duel control can this be done and how dificult is it to do im adding stearing to this boat also?
A:
This can be done, but you will need to have some adaptations to your motor so you will need to contact Evinrude. This will require universal control cables with K23 connection kit after you have gotten the conversion.


Q:
I have a 1972 50hp Mercury outboard that needs a little more throw to engage reverse. Does this control have that kind of adjustibility?
A:
The control does not, but you can adjust your cable to do that. That is where the adjustment is made, on the cable. Not the remote.


Q:
I have a Mercury classic 50, {not sure of the year ,plate was worn down} its either an 88 or 89. Which cables would work w it and what connectors would I need to have if any? Thanks?
A:
Yes this will work with your motor. You need CC179 and the length you will need to know: http://www.iboats.com/Mercury-Type-600A-Series-Control-Cables-by-SeaStar/dm/view_id.1266890


Q:
What cable do I need for a suzuki 30 hp?
A:
You need one of these cables, you will need to verify length: http://www.iboats.com/C2-Universal-33C-Control-Cables-by-Uflex/dm/view_id.729991


Q:
I have a 1976 mercury 1750 will this work and what kind of cables do I need?
A:
Yes it will. You will need part number C5X-- and then select the length you need.


Q:
I have a 1967 Johnson Evinrude 60 hp what contact do I need? ?
A:
This requires the CC170 or C4X cables with K24 connection kit for your motor.


Q:
Hello, I have a 1967 Johnson Evinrude 60hp and purchased this dual side mount. Will this work on that engine and what cables, etc. will I need?
A:
This is universal in its design. It requires these cables with K24 connection kit: http://www.iboats.com/C4-Johnson-Evinrude-OMC-Control-Cables-by-Uflex/dm/view_id.1183723


Q:
Will it work on 2007 Suzuki DF9.9 4 stroke long shaft?
A:
It will work on all outboard engines.


Q:
What cables do I need for 1988 35 hp mercury?
A:
You need part number C5X-- and then select the length you need.


Q:
What cables do I need for a 2006 9.9 Mercury outboard?
A:
For use with SeaStar engine control cables: CC205 with K23 connection kit; CC170 with K24 connection kit; CC172, CC633 with K25 connection kit; CC179 without connection kit.


Q:
What cables do I need for a 1988 Johnson 20hp?
A:
Hi you need the CC205 cables: http://www.iboats.com/CC205-Johnson-Evinrude-OMC-Control-Cables-by-SeaStar/dm/view_id.2071 To use with this control box you need the K23 connection kit from Uflex.


Q:
WHAT CABLES DO I NEED FOR A 1989 EVINRUDE 110 HP?
A:
You need the C14 cables (you need to know length required): http://www.iboats.com/C14-Johnson-Evinrude-OMC-Control-Cables-by-Uflex/dm/view_id.1183586 You will also need the K23 connection kit to use this remote control unit: http://www.iboats.com/C14-OMC-Type-OS-Connection-Kit-Cables-To-Controls-Uflex/dm/view_id.256429


Q:
Will this work on a 1988 force 125hp and what cables would it use?
A:
Yes you can use this for that outboard. You will need SeaStar CCX633 cables, Uflex C2 cables, or C33 cables and then you will need to know length you need. Finally you will need K25 connection kit. If you have further questions contact us at the number at the top of the page.


Q:
I have a late 90s Johnson fast strike 150. What cables and kit would I need?
A:
You need C14 cables: http://www.iboats.com/C14-Johnson-Evinrude-OMC-Control-Cables-by-Uflex/dm/view_id.1183586 Then you will also need the K23 connection kit.


Q:
What cables,etc. would I need 84'evinrude 40hp?
A:
You need these cables with a K23 connection kit: http://www.iboats.com/Side-Mount-Dual-Lever-Control-Black-Uflex/dm/view_id.256254


Q:
I have a 1973 6 horse evinrude will this work on that engine and if it will what cables will I need?
A:
Yes it will you will need cables C4X--, then the length you need for your boat. You will also need K24 connection kit.


Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies