The Moeller Electric Sending Unit is designed to gather information the level of fuel in the tank. This swing arm electric sending unit operates in range of 33 - 240 ohms an industry standard. This mounts to compatible dash mounted gauges without any need for conversion capsule, saving time and money. The float easily rotates in 90 degree increments to avoid interference with tank walls. To ensure a perfect fit, you can cut the length of the unit’s swing arm.
Features of Moeller Universal Electric Sending Unit:
Swing arm electric sending unit
Mounts to dash without conversion capsule
Internal components are made of Ni-Chrome for added protection from corrosion and longer life.
Float rotates in 90 degree increments
Mounts with standard 5 screw bolt on pattern with self sealing screws included.
Gasket made of a fuel resistent compound for longer life.
I need to replace a Rochester 9341-7000 with round top. Will this work?
This doesn't necessarily cross reference, but you can use it and adjust to the length you need. I believe the round 9431-R7000 tank depth was 6-25". If you have further questions give us a call at 1-800-914-1123.
If am replacing a 15 year old Moeller Mechanical 24" quage Is the 5 hole confiquration likely to be the same so it is an drop in replacement. Also old unit is 24" but tank is deeper (2-3 ") Should I adjust new unit to 24" rather than actual tank depth?
Since you would be replacing one Moeller part with another that has an extensive range, you should have no problem with replacing it with this sending unit and gauge. According to Moeller, you shouldn't have to make any adjustments.
Since this is an aftermarket sending unit we cannot match it up by boat. You will need to measure tank depth and minus a 1/2". You can cut this to proper size though if needed. If you have further questions contact us at the number at the top of the page.
Everything seems good except for the switch. can i buy the switch only/?
Unfortunately, we do not carry the switch separately. If you need help finding it, you can post a question on our Forum. Thousands of boaters visit there every day and can assist you in finding just the switch. You can access the Forum page at http://forums.iboats.com/
Since we are not technicians we cannot give you installation advice, but here is the installation instructions from Moeller: http://www.moellermarine.com/sites/moellermarine/files/mm128_univ_electric_sending_unit_htg_layout_1.pdf
Unfortunately, this is not compatible with that application. If you need help finding a sending unit that will work, you can visit our Forum and post a question to receive further assistance. You can find the Forum at http://forums.iboats.com/