Uraglow™ Standard Reducer, Gallon - Blue Water Marine Paint
Use when application & cure temperatures are between 70° F - 85° F (21C - 29C). Standard Reducer will keep the paint film open but evaporate fast enough to provide adequate dry times and dust-free times.
Surface Cleaner is used before and after sanding, between applications of primers, fillers, and topcoats. Removes moisture from the surface, which can cause a gloss finish to come out flat. Also removes waxes, oils, and greases commonly found on painted surfaces and gelcoat.
All reducers are used for all primer, topcoats and clears, and can be blended as needed with each other in any ratio to fine tune flow and evaporation rates.