Vented Support Pole - 30" to 57" - Westland

Vented Support Pole - 30" to 57" - Westland
Your Price: $44.99
Save: $27.23
(37% Off $72.22)
Part # 5007-5 ValueShip™ Eligible
Westland

Product Families

Westland Vented Support Pole
    Part # 5007-5 NEW - Now Westland offers a second outstanding boat cover support system. It not only supports your cover, it also vents your cover to …
    NEW - Now Westland offers a second outstanding boat cover support system. It not only supports your cover, it also vents your cover to prevent mildew build up so your boat will stay dry on the inside. The Westland support/vent system utilizes a strong upper two-piece vent that's placed in the area that will best support your cover so water will run off. After installing the top half on the outside of the cover and the bottom half on the under side of the cover, insert the adjustable support pole and adjust to proper height to support the cover. (The installation of this pole requires a hole to be cut in the cover)
    Based On 25 Reviews | Write Review
    Vent pole
    by Robert from Nanaimo, British Columbia on July 05, 2014
    Works as advertised
    Was this review helpful?
    5007-5
    by Stephane from Rouyn-Noranda, Quebec on May 21, 2014
    Easy to install
    Was this review helpful?
    Boat Vent and pole
    by Tiney from Medford, Oregon on February 21, 2014
    Did the job perfectly-it should really come with a cover in the beginning.
    Was this review helpful?
    vented support tube
    by Dannie from Smithton, Illinois on October 15, 2013
    Seems to work well, a little over priced, but does the job well,,
    Was this review helpful?
    happy girl = happy boy!
    by Heidi from Santee, California on October 01, 2013
    Completely satisfied with parts and service!!
    Was this review helpful?
    Easy peasy
    by Diane from Cusick, Washington on September 16, 2013
    This did the trick and is secure and sturdy. We used the template, attached the pole and it works fine.
    Was this review helpful?
    Easy to install.
    by Wallace from Bloomfield, Indiana on September 16, 2013
    This Support Pole was easy to install as the instructions were clear and easy to follow. As we are in late summer with hot days and cool moist evenings the ventillation that this provides is keeping the uderside of the boat cover dry. I believe that this was a wise purchase.
    Was this review helpful?
    Good
    by Julia from Murrieta, California on August 17, 2013
    Good
    Was this review helpful?
    Pole Review
    by Mark from Homewood, Alabama on July 22, 2013
    Easy to use and quite effective.
    Was this review helpful?
    Vented support pole
    by Stanley from Fayetteville, Georgia on July 19, 2013
    Product is a bit expensive but appears to work as advertised. Pole is well made and easy to properly install. Time will tell if it is effective in reducing mold and mildew but I believe it will be beneficial.
    Was this review helpful?
    Vented support Pole
    by Mike from Union City, California on July 12, 2013
    Works Great
    Was this review helpful?
    SUPPORT POLE
    by Mary from Ashland, Nebraska on July 11, 2013
    The vent pole was just what I needed for support for my boat cover
    Was this review helpful?
    Vent Pole
    by Neil from Great Barrington, Massachusetts on June 20, 2013
    Worked as advertised
    Was this review helpful?
    pole
    by Shane from Oshkosh, Wisconsin on May 07, 2013
    no questions
    Was this review helpful?
    Vents Great and Works Great When The Pole Stays Properly in Place
    by Julie from Lexington, South Carolina on April 29, 2013
    As other reviewers have said, I should have bought two for my 232 Bryant boat but didn't know at the time. I guess because I didn't, it put too much stress on the one I did purchase, which I placed per the instructions but now when I lock it down, after a few minutes it slides down anyway and doesn't keep the top tight. I'm disappointed, but hopeful that the second one will work in place of the first, and I can move the original to the front of the boat where I don't need it to stand as tall. Besides this problem, this is a great product and I'm glad I purchased it.
    Was this review helpful?
    vented pole
    by Jean from Waynesville, North Carolina on April 29, 2013
    needed vented pole to help reduce mildrew in boat. your pole was a good design and works good. excellent part
    Was this review helpful?
    Great product
    by Donald from Adrian, Michigan on April 14, 2013
    In 35 years of boat ownership I have replaced a number of boat covers because I did not have this support pole. This product should eleminate the damage done by snow and water accumulating on the cover.
    Was this review helpful?
    perfect vent
    by Pedro from Somerset, Texas on February 10, 2013
    worked out really well. product was made good, we are very happy
    Was this review helpful?
    Pole
    by Richard from College Station, Texas on January 22, 2013
    Have not tried to install it yet not sure i want to cut the cover and risk potential tear in the future.
    Was this review helpful?
    support pole
    by Philip from Colleyville, Texas on December 07, 2012
    I was nervous about cutting the hole in my expensive new cover to install this but the material (sharkskin plus) was so resistant it took a while to cut. Apeears the vent section will hold firm to the cover and I expect great results.
    Was this review helpful?
    Vented Support Pole - 30" to 57" - Westland
    by Carroll from Prescott, Arizona on April 22, 2012
    Easy to install and seems strong.
    (1 of 1 people found this review helpful)
    Was this review helpful?
    missing parts
    by Holly from Akron, Ohio on April 07, 2012
    Only came with a pole, did not come with the cap
    (1 of 1 people found this review helpful)
    Was this review helpful?
    Nice addition
    by Thomas from Sparks, Nevada on April 04, 2012
    I got this with the Westland Hydamax cover I ordered. The cover already comes with vents sewn in it so I didn't cut a hole for this and instal it, instead I just use it to keep the cover from sagging in the middle so the water will run off better.
    (2 of 2 people found this review helpful)
    Was this review helpful?
    Arkansas Boater
    by David from Conway, Arkansas on March 27, 2012
    Easy to install and use. Much better than using an oar or 2x4 to prop up a sagging cover!
    (1 of 1 people found this review helpful)
    Was this review helpful?
    Review for Vented Support Pole - 30" to 57" - Westland
    by a Customer on June 16, 2009
    Arrived in good shape.
    (5 of 57 people found this review helpful)
    Was this review helpful?
    Ask a question for
    This product ships in 3 business days.

    Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
    * Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
    Standard Shipping Policies

    Please be careful when ordering this product, it has limitations that differ from our General 30-day Return Policy. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends

    Semi-Custom Boat Covers

    Semi-custom covers are "made-to-order" and are thus specific to your order. However, we understand that sometimes a product you purchase just doesn't work out, which is why we want to make the return process as easy as possible for you. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends.

    A made-to-order semi-custom cover may be returned within the first 30 days after shipment, but is subject to a 15-25% restocking fee. Odd-Lots, Liquidations, In-Stock Specials, Closeouts and customer requested alterations are non-returnable unless an error was made by iboats.com or by the boat cover manufacturer.

    Merchandise must be in new, unused condition with all original packaging in good condition; plus parts, accessories, manuals, and/or warranty cards included. You will need to receive a return authorization number (RA #) as well as instructions from our Customer Service Department.

    Please note that each boat cover manufacturer may have additional requirements concerning product returns or warranty claims, including but not limited to: restocking fees, shipping fees, or product order change fees.

    Because boat covers are "made-to-order", there will be a $25-$50 fee for any boat cover order cancellation after 1 business day of purchase, as the cover has already gone into production.

    Warranty Policy

    30 days after the purchase date, the manufacturer of the product(s) will need to be contacted for a warranty claim.

    Returns for Canadian Customers

    Canadian customers, please be careful when placing your order; iboats.com does not accept any return merchandise on Canadian orders unless the merchandise you received was defective, damaged, or an error was made by iboats.com. In such cases, please contact iboats.com Customer Service within 30 days of the original shipping date for a return authorization number. Returned items that do not have a RA # will not be accepted.

    See our complete return policy.
    September Savings! Enjoy deep discounts on thousands of clearance and winterizing items.