Vented Support Pole - ENDURACover

Vented Support Pole - ENDURACover
Your Price: $25.99
Save: $24.20
(48% Off $50.19)
Part # 60002 ValueShip™ Eligible
ENDURACover

Product Families

ENDURACover Boat Cover Vents and Support Poles
    Prevent dry rot and mildew. These lightweight telescoping poles are designed to support your cover so that water does not pool. Available in three …
    • Best way to support your cover in rain, snow, and icy conditions.
    • Provides evenly distributed ventilation along the entire underside of the mooring cover
    • Slim design, visual appeal
    • Provides a higher volume of airflow per square foot of cover, more than any other fixed-vent
    • Design maximizes airflow across the entire underside of the mooring cover
    • Changes in wind direction have no significant effect on vent performance
    • Adjustable from 40" to 70"
    Average Customer Review for Vented Support Pole - ENDURACover
    Based On 62 Reviews | Write Review
    A little light duty but it works
    by Todd from Livingston, Louisiana on August 03, 2014
    Not as heavy duty as it needs to be but will work ok I guess.
    Was this review helpful?
    vented pole
    by Jon from Burlington, North Dakota on July 30, 2014
    definitly recommend this product
    Was this review helpful?
    Vented Support Pole
    by Kenneth from Mustang, Oklahoma on July 09, 2014
    The biggest issue I have is that the instructions for the product stink, other than the how to cut a hole into your new boat cover. You get a bag of poles and other parts with what appear to be two connecting pipes. I comes with snap connection pole (which was nice) since my cover had a snap-support sewn in.
    Was this review helpful?
    boat cover and vented support pole
    by Thomas from Cary, North Carolina on March 31, 2014
    I guess it was my fault..I ordered a new cover and a vented support pole...the cover came without a vent..so the pole is not able to be used. should this be flagged when the order is placed?
    Was this review helpful?
    vent poles
    by Randy from Bethlehem, Connecticut on March 29, 2014
    poles fit good
    Was this review helpful?
    Good Quality Value
    by Jeffrey from New London, North Carolina on March 06, 2014
    The poles are well made and work well.
    Was this review helpful?
    Vent
    by Carl from Pensacola, Florida on February 07, 2014
    Good product, meets the need for ventilation with boat cover installed, but be prepared to cut a hole in your boat cover to allow the vent tube installation.
    Was this review helpful?
    Vented Support Pole
    by John from Litchfield Park, Arizona on January 14, 2014
    Didn't cut a hole in the cover to use the pole instead just inserted it in a boat seat mount and draped cover over it.
    Was this review helpful?
    Nice quality and easy to install
    by Stacey from Orland Park, Illinois on December 24, 2013
    This is a great product to keep the boat cover elevated to help with keeping the rain running off of it. You do need to cut a hole in the cover which can be a little stressful for some.
    Was this review helpful?
    vented support pole
    by David from Lexington, North Carolina on December 19, 2013
    xx
    Was this review helpful?
    Lack of explanation in Advertising
    by Craig from Petaluma, California on November 25, 2013
    Its probably my fault that I did not know that I would have to cut a hole in the new cover to install this vent pole. I assumed that when I ordered this that it would have been made for the hole in the cover and that the new cover would have been reinforced in the area of the cut hole. They just give you instructions of cutting the hole. No way am I going to cut a hole in my new cover and not reinforce it.
    Was this review helpful?
    boat cover vent
    by Marvin from Sardis, British Columbia on November 24, 2013
    I was very satisied.
    Was this review helpful?
    Pole vent
    by James from Spring Green, Wisconsin on November 08, 2013
    It looks nice but I haven't installed yet! but I know it will work well
    Was this review helpful?
    support pole
    by John from La Mesa, New Mexico on November 04, 2013
    Installation was simple. I suggest a double thickness mounting location be provided on the cover. Also a mounting arrangement should be on the vent pole to assist with the support straps.
    Was this review helpful?
    Vent pole
    by Tim from Salem, Ohio on September 21, 2013
    Vents good but the pole is kind of stupid, it comes in three pieces with two small extension pieces. Most poles are two piece with a locking lever. Just a stupid design.
    Was this review helpful?
    Cover support
    by Danielle from Duglasville, Georgia on August 31, 2013
    Works great. So far so good!!
    Was this review helpful?
    Small
    by Ed from Marco Island, Florida on August 10, 2013
    The pole is too small for my boat. The cover is great!!!
    Was this review helpful?
    boat cover
    by Robert from El Mirage, Arizona on July 22, 2013
    It was the wrong color but works good
    Was this review helpful?
    Vented Pole
    by Robert from South Weymouth, Massachusetts on July 13, 2013
    easy to instal
    Was this review helpful?
    good idea
    by Bob from Ayr, Ontario on July 08, 2013
    A good idea. need to add a couple more without poles to vent while towing boat and trailer, stops the flapping. Could have been 6 inches longer to completely cover bow mount electric but not a major issue.
    Was this review helpful?
    a1
    by Ian from Point Edward, Ontario on May 31, 2013
    great
    Was this review helpful?
    Disappointing
    by Kurtis from Antioch, Illinois on May 30, 2013
    The vent requires you to cut into your cover to mount it- which will prevent you from returning your cover if you want to. The poles that slide into the adjusting bottom piece dont fit right. They are too large and require a lot of work to get it into the base. After that they're almost impossible to get apart. The vent itself seems fairly heavy-duty, which is a good thing.
    Was this review helpful?
    Works great.
    by Jared from Houma, Louisiana on May 12, 2013
    Easy setup and install by simply cutting a hole in the cover with the template provided.
    Was this review helpful?
    Bimini cover
    by Todd from Zachary, Louisiana on May 04, 2013
    Fine
    Was this review helpful?
    Vented Support Pole
    by Michael from Goodlettsville, Tennessee on April 10, 2013
    The support pole was simple to install and works as advertised. was worried about cutting the hole in the cover but after using the template and following the great instructions, I am very pleased with the results. Thanks, iboats.com
    Was this review helpful?
    Poles do not fit together easily
    by Ronald from Yuma, Arizona on March 19, 2013
    This support comes in several pieces. They are intended to slip together. They are very hard to join. Had to ream to make them fit and then they are not easy to join.
    Was this review helpful?
    Support pole
    by Tom from Mill Spring, North Carolina on February 04, 2013
    :)
    Was this review helpful?
    Boat cover and ventilation pole
    by Roger from Charlotte, North Carolina on January 06, 2013
    I wasn't sure which product to buy so I Emailed the company. Peter Johnson responded and he was incredible. Walked me through everything and when I decided what I wanted he sent a link directly to order the right product. He was the best. I ordered all right before Christmas and they said that it would ship within 24 days. To my surprise - everything arrived before Christmas. All the way around excellent experience.
    Was this review helpful?
    17 ft MFG Gypsy Star cover and supports
    by Beverly from Webster, New York on December 26, 2012
    Our purchase was for both the boat cover (sized for a 17 foot MFG Gypsy Star) and the cover support system mentioned in this review. Since these items were purchased as a Christmas gift for my grandson there was a delay between purchase and the young boat owner becoming aware of "his treasure". As you might imagine he was extremely pleased and very surprised on Christmas morning. Both cover and support system must wait for winter to pass before they can be put to use since the boat is currently shrink wrapped to protect it from bad weather. We will re-review as soon as the items can be utilized. Perhaps you can guess that the time cannnot pass quickly enough for my grandson until he is able to get the boat back into the water.
    Was this review helpful?
    xxx
    by Dannie from Nashwauk, Minnesota on October 05, 2012
    xxxx
    Was this review helpful?
    Cover
    by Ann from Tallahassee, Florida on October 05, 2012
    fits like a charm
    Was this review helpful?
    not sure.
    by Rodney from Keizer, Oregon on October 04, 2012
    I didn't use this because you have to cut a hole into a brand new cover. If you use the cover without the pole it sags from the weight of the vent. Save your money for something different.
    Was this review helpful?
    rock solid
    by Ryan from Auburn, Indiana on August 09, 2012
    built very well. Cam lock is very easy to operate.
    Was this review helpful?
    Vented Support Pole
    by John from Pensacola, Florida on August 06, 2012
    The product is not worth buying it is to light and doesn't hold up
    Was this review helpful?
    vented support pole
    by Paul from Port st Lucie, Florida on July 17, 2012
    Nothing wrong with product, just dont want to cut hole in new cover. Might start to tear
    Was this review helpful?
    vent
    by Michael from Spencerport, New York on June 20, 2012
    easy to install
    Was this review helpful?
    Still contemplating the right placement
    by Gary from Forestburgh, New York on June 06, 2012
    I have 3 fiberglass bows for my new cover and have not yet determined the best location for this Vented support pole. Since my cover will be used when traveling I do have fears about cutting a hole in the cover and the possibility of weakening the material if I place it in the wrong spot.
    Was this review helpful?
    support pole
    by Stephen from Lindsay, Ontario on May 25, 2012
    Overall a good product. Took a bit to figure out how it works but after that it's been good. Smart idea! Would recommend to anyone who is looking or wants new support poles!
    Was this review helpful?
    improvements
    by Richard from Gatineau, Quebec on May 17, 2012
    The system should include 2 20 inches horizontal poles stretching opposite from the centre unit to keep the middle of the tarp higher for better water shedding to the sides
    Was this review helpful?
    Great product
    by Sheldon from Duck Key, Florida on April 22, 2012
    It works exactly as described. It would be advantageous to have base on the pole
    Was this review helpful?
    Endura cover pole kit
    by Michael from Markham, Ontario on April 16, 2012
    The pole with vent kit is well thought out but the manufacturing failed. The sliding adjustable poles do not slide inside each other. Just to close a tolerance to work. I used something else instead.
    Was this review helpful?
    Vented Support Pole
    by Earl from Wichita Falls, Texas on April 13, 2012
    It’s what I expected and it’s a good idea. I would like a better base for the pole.
    Was this review helpful?
    Great Products
    by James from Morgantown, West Virginia on April 01, 2012
    Very satisfied with the Support Pole, the Endura Cover and the tie-down kit!! Fits my boat well and easy to install.
    Was this review helpful?
    It Takes More Than One Pole
    by Pedro from Brunswick, Georgia on March 05, 2012
    The cover for my 27ft boat came with only one support pole and one set of 12 straps (the cover has 24 loops for straps). After the first rainfall I bacame painfully aware that only one pole, and one set of straps are insufficient to properly stretch the cover to prevent water from pooling on sections of the cover. The pooled water was so heavy that it bent and ruined the one pole. I determined it takes at least 6 poles, and a larger number of straps to properly prevent water from pooling. I begrudgingly purchased the additional poles and an additional set of straps.
    Was this review helpful?
    Vented Support Pole - Boat Cover
    by William from Mauldin, South Carolina on January 28, 2012
    Awesome product
    Was this review helpful?
    vented support poles-boat cover
    by William from Mauldin, South Carolina on January 28, 2012
    Awesome Product
    Was this review helpful?
    Boat Cover
    by Stanley from Carleton, Michigan on January 23, 2012
    Purchased this cover for my 1978 Mako 25' CC and it fit it like a glove. This is the best cover I"ve ever had for this boat. I would recommend this to anyone with a '78 Mako 25' CC
    Was this review helpful?
    verry good
    by Luc from Laval des Rapides, Quebec on November 13, 2011
    fit good and good ventilation
    Was this review helpful?
    Boat cover and center support with straps
    by Lonnie from Elephant Butte, New Mexico on October 01, 2011
    Center pole collapses and plastic tightner broke.
    (1 of 1 people found this review helpful)
    Was this review helpful?
    Vented Support Pole
    by Thomas from Derby, New York on September 19, 2011
    I was rather leary about cutting a hole in my brand new boat cover. I would have preferred it being done at the "factory", however I understand why it needs to be done after fitting the cover to the boat. It was easy! I took a deep breath, followed the simple instructions, cut the hole and put the fitting through. I was done. Works perfectly.
    Was this review helpful?
    Vented Pole
    by James from Boise, Idaho on September 11, 2011
    A patch of fabric should be sewn in to reinforce the hole for the vent, which will add to the expense of the cover.
    Was this review helpful?
    disappointed
    by Dan from Sandy Hook, Virginia on August 04, 2011
    wish i had read reviews before purchasing this with my new cover, i was under the impression ordering them together the vent portion would be installed in the cover when it arrived....no chance i am cutting a hole in my new cover to use this
    (1 of 1 people found this review helpful)
    Was this review helpful?
    Support
    by David from Rogers, Minnesota on July 30, 2011
    Works well with any cover.
    Was this review helpful?
    it should work
    by Jeff from Ames, Iowa on July 20, 2011
    I think this product is designed well. There are various options for installation, which is a must because this product works for a variety of different covers. It looks like it should be stable and allow for air exchange. Getting the hole cut in the right place in your cover will be the biggest challenge with this product.
    Was this review helpful?
    Suport pole
    by Austin from Joliet, Illinois on June 15, 2011
    They could add a sticky ring to help this stay in place and seal better.
    (0 of 1 people found this review helpful)
    Was this review helpful?
    Vented Support Pole- Endura Cover
    by Kevin from Eaton, Ohio on June 13, 2011
    I would highly recommend the vented support poles for the Endura Cover. I have a 19' bass boat and the vented support poles were very easy to install and worked great
    Was this review helpful?
    Did not use.
    by Angelic from Chicago, Illinois on June 09, 2011
    You needed to put a hole in the cover to use it and we could not see damaging something we just paid a lot of money for. Why not put a spot in the cover for the pole to go through?
    (2 of 2 people found this review helpful)
    Was this review helpful?
    Cut a hole in my new boat cover ????? No way !!
    by David from Grand Rapids, Minnesota on May 24, 2011
    If this boat pole vent, requires the customer to cut their own hole, in their own brand new cover, how do you re-enforce the edges of the cut, to not fray over time ?? The cover should come with a plastic grommet in place, for the vent/pole to sit into. This is a huge waste of money, if every customer, has to do his/her own fabricating in order to make this work. What a joke. I thought this was a well thought out system, not a custom, DIY project. For all the money paying, should not have to be fabricating materials, to prevent fraying. If this is case, I guess I might be returning it all, and pay to get a custom cover, and vent system, even if twice as much. Worth it for time realization, in theory.
    (7 of 7 people found this review helpful)
    Was this review helpful?
    Review for Vented Support Pole - ENDURACover by Carver
    by a Customer on July 06, 2009
    Like the idea of the vented support. I'll have to reserve total judgement until I've trailer boat. Not really sure I want to cut a hole in my nice new cover.
    (4 of 9 people found this review helpful)
    Was this review helpful?
    Review for Vented Support Pole - ENDURACover by Carver
    by a Customer on June 11, 2009
    Not as will built that i thought it was.
    (4 of 7 people found this review helpful)
    Was this review helpful?
    Review for Vented Support Pole - ENDURACover by Carver
    by a Customer on May 05, 2009
    A must in damp/wet climates
    (4 of 8 people found this review helpful)
    Was this review helpful?
    Review for Vented Support Pole - ENDURACover by Carver
    by a Customer on April 29, 2009
    (0 of 7 people found this review helpful)
    Was this review helpful?
    This product ships in 3 business days.

    Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
    * Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
    Standard Shipping Policies

    Please be careful when ordering this product, it has limitations that differ from our General 30-day Return Policy. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends

    Semi-Custom Boat Covers

    Semi-custom covers are "made-to-order" and are thus specific to your order. However, we understand that sometimes a product you purchase just doesn't work out, which is why we want to make the return process as easy as possible for you. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends.

    A made-to-order semi-custom cover may be returned within the first 30 days after shipment, but is subject to a 15-25% restocking fee. Odd-Lots, Liquidations, In-Stock Specials, Closeouts and customer requested alterations are non-returnable unless an error was made by iboats.com or by the boat cover manufacturer.

    Merchandise must be in new, unused condition with all original packaging in good condition; plus parts, accessories, manuals, and/or warranty cards included. You will need to receive a return authorization number (RA #) as well as instructions from our Customer Service Department.

    Please note that each boat cover manufacturer may have additional requirements concerning product returns or warranty claims, including but not limited to: restocking fees, shipping fees, or product order change fees.

    Because boat covers are "made-to-order", there will be a $25-$50 fee for any boat cover order cancellation after 1 business day of purchase, as the cover has already gone into production.

    Warranty Policy

    30 days after the purchase date, the manufacturer of the product(s) will need to be contacted for a warranty claim.

    Returns for Canadian Customers

    Canadian customers, please be careful when placing your order; iboats.com does not accept any return merchandise on Canadian orders unless the merchandise you received was defective, damaged, or an error was made by iboats.com. In such cases, please contact iboats.com Customer Service within 30 days of the original shipping date for a return authorization number. Returned items that do not have a RA # will not be accepted.

    See our complete return policy.
    Dollar after dollar of sitewide savings!
    Dollar Days Sale!