Seasense
Waterproof Deck Plate, Black, 6-13/16" - Seasense
Price: $8.34
Save: $1.65
(16% Off $9.99)
Part # 50031055
2nd Day Air for $2 More Eligible
SHIPS TODAY!* if ordered in 11 hrs 11 mins.
Waterproof Deck Plate, White, 5-3/16" - Seasense
Price: $6.98
Save: $1.41
(16% Off $8.39)
Part # 50031054
SHIPS TODAY!* if ordered in 11 hrs 11 mins.
Hurry! Only 1 left in stock
Waterproof Deck Plate, Black, 5-3/16" (Snap)
Price: $6.68
Save: $1.71
(20% Off $8.39)
Part # 50031072
SHIPS TODAY!* if ordered in 11 hrs 11 mins.
No Reviews
Waterproof Deck Plate, Black, 8-1/8" (Snap)
Price: $9.35
Save: $2.34
(20% Off $11.69)
Part # 50031073
SHIPS TODAY!* if ordered in 11 hrs 11 mins.
Waterproof Deck Plate, Black, 6-13/16" (Screw-In)
Price: $8.63
Save: $2.16
(20% Off $10.79)
Part # 50031082
2nd Day Air for $2 More Eligible
SHIPS TODAY!* if ordered in 11 hrs 11 mins.
Hurry! Only 1 left in stock
No Reviews
Waterproof Deck Plate, White, 8-1/8" (Screw-In)
Price: $10.03
Save: $2.56
(20% Off $12.59)
Part # 50031085
SHIPS TODAY!* if ordered in 11 hrs 11 mins.
No Reviews
Waterproof Deck Plate, Black, 8-1/8" (Screw-In)
Price: $10.03
Save: $2.56
(20% Off $12.59)
Part # 50031084
SHIPS TODAY!* if ordered in 11 hrs 11 mins.
No Reviews

Watertight access points without the use of tools. Great for access to shut off valves or back-fastenings, inspection ports and the ability to clean out compartments. UV stabilized plastic construction. Easy installation. Screw cap.

Full StarFull StarFull StarFull StarFull Star
Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull Star
Deck Plate
by Craig from Delavan, Wisconsin on August 07, 2015
Perfect Fit!!
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
Based On 2 Reviews | Write Review
Full StarFull StarEmpty StarEmpty StarEmpty Star
description is misleading and plastic is cheap
by Jeffrey from Ashland, Wisconsin on September 11, 2016
I ordered 5-3/16 deck plates. What i got was 4" deck plates. No dimension on these covers is 5-3/16". The description is horrible, as you don't know what you're buying. Also, the plastic feels really cheap, as does the tether and gasket. the gasket falls out of place when you open the cover. I'm returning these.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
very good, but could use simple, slight improvements
by Jeff from Cape Carteret, North Carolina on October 16, 2014
pros: good quality, comes with a small plastic 'leash' that can be attached to the lid center with a wood screw and used to keep the lid from getting lost (this will also keep the gasket from getting lost if you use this leash), just attach one end to the center of the lid and the other to one of the 6 mounting fasteners. cons: The size of the opening is 4 inches, I think the description is a little unclear and likely gives overall dimensions, opening diameter should be listed. The gasket is clear and is very loose-fitting, it seals very well, but if you are not careful it could be easily lost when the cover is unscrewed (especially since it is clear and hard to see or feel when inserted properly).
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Based On 1 Review | Write Review
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
ZSize and Discription issue
by Pat from Roslyn Hgts, New York on May 13, 2016
The size of plate was very unclear in the product description I needed an 8 inch plate got a 6 shipping was nearly as much as plate so it is junk to me and will not pay the cost of the plate (again) to send it back Better to go to your local dealer/ marine store may pay a bit more but you will get what you need
Was this review helpful?
Q:
Do you have a screw in deck plate that is bigger then a 6 inch opening ?
A:
50031082 is a 8-1/8" with an opening of 6-3/8".


Q:
Are these screw in or bayonet lids?
A:
This series has both snap and screw in styles. This particular one is a snap in style.


Q:
What are the cut-out diameters for the 6 13/16" and 8 1/8" deck plates?
A:
According to Seasense's sources, the cutout is 5-1/8 inches.


Q:
What size hole does the deck plate fit into?
A:
The hole pattern is 7-1/4". The inner diameter is 6-3/8" and the outer diameter is 8-1/8".


Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies