iboats - The #1 Store For Everything Boating  
Boat Parts & Accessories

Yamaha Marine AR210 - Jet Boat


These are 2007 boats. See current models at
New 2014 Yamaha Marine - AR210 - Jet

2007 Yamaha Marine AR210 Description

2007 Yamaha Marine AR210 Specifications
Boat
  • Length Over All: 21 Feet and 3 inches.
  • Draft: 1 Feet and 4 inches.
  • Beam: 8 Feet and 6 inches.
  • Fuel Tank Capacity: 50
  • Max Load: 1620
  • Dry Weight: 2950
Engine


2007 Yamaha Marine AR210 Standard Features


The Powerplant
The AR210 is powered by two high-performance, 110 horsepower, four-cylinder, 1052cc Yamaha marine engines. Electronic fuel injection feeds each of these powerplants, providing excellent throttle response throughout the total RPM range.
Yamaha Loop-charged Combustion: Fuel mixture actually loops as it enters the combustion chamber, which helps distribute fuel/air mixture evenly for better combustion, performance and fuel economy.
Corrosion Protection System: Sacrificial zinc anodes protect the engine from harmful galvanic corrosion. Stainless steel fasteners (nuts, bolts, hardware) assure a long service life. Cylinders, cases and heads are all treated with a durable oxide coating to form a barrier between corrosion and expensive engine parts.
Electronically Controlled, Variable Ignition Timing: For exact ignition advance control at all throttle positions and RPMs.

The Jet Pump Propulsion System
The AR210 twin 155mm hyper-flow jet pump propulsion system with three-blade stainless steel impeller is designed to maximize water flow for high performance. The twin pump configuration provides excellent hook-up and smooth acceleration.
Stainless Steel Impeller Housing Liners: For high durability, the liners maintain accurate clearance tolerances between the impeller and the housing.
High Flow Intake Ducts and Grates: The dynamic shape of these items directs water flow into the pump for optimum thrust, performance and hook-up.
Cooling Water Intake Filters: Filters out harmful debris that could cause blockage of important cooling water passages.
Jet Pump Clean-out Plugs with Push Button: Allows for direct access to the inlet duct cavity to easily clear any debris from the pumps from inside the boat.

The Hull and Deck
The AR210 utilizes a deep-V, multi-chine hull with 20-degree dead rise. The hull and deck are constructed of multiple layers of fiberglass with sandwich core construction reinforcements.
The fiberglass stringer is separately constructed, laminated into the hull and then injected with foam to provide maximum floatation as well as longitudinal and lateral structural rigidity.
The engine bed, which represents a revolution in boat design, is a separate fiberglass part bonded into the hull with polyurethane adhesive then laminated to the hull and stringer system. This separate engine bed also isolates and protects the engines from any water in the bilge area of the boat as well as providing isolation from engine vibration and noise.
... more
Be the first to write a review for this boat!





My iboats.com