Yamaha Marine FX Cruiser HO - Personal Water Craft Boat

2009 Yamaha Marine FX Cruiser HO Standard Features

The Powerplant
· The FX Cruiser HO is powered by an all new 1.8 liter, high output Yamaha Marine Engine. This 1812cc engine, which is purpose-built for the marine environment, is the largest displacement engine ever installed in a personal watercraft. It is also the only engine in the high-performance, four-stroke category optimized to run on the least expensive Regular Unleaded fuel.
· Electronic Fuel Injection (EFI): Four electronically controlled fuel injectors, throttle position sensor (TPS) and intake air pressure and air temperature sensors supply the optimum air/fuel mixture. The results are a smooth, high power output with low fuel consumption and low exhaust emissions.
· Specially Designed, One-piece Cylinder and Crankcase Assembly: Provides tremendous engine rigidity that's lighter and stiffer than two-piece designs.
· Slant Detection Switch: Electronic switch stops engine and oil pumps immediately if watercraft becomes overturned, protecting motor from unwanted water ingestion.
· High Volume Intake Box: With water repellent air filter and flame arrestors.
· Wet Sump Lubrication: Uses two engine oil pumps to deliver lubricated oil to each moving part with water-jacketed sump and oil backflow protection.
· Independent Water-jacketed Exhaust Manifolds with Collector: Achieves high power while keeping noise and exhaust heat under control.
· Thermostatic Cooling System: Water flow through the engine is automatically controlled through a thermostat sensor.
· Corrosion Protection System: Sacrificial zinc anodes protect the engine from harmful galvanic corrosion. Stainless steel fasteners (nuts, bolts, hardware) provide a long service life. Cylinders, cases and heads are all treated with a durable oxide coating to form a barrier between corrosion and expensive engine parts.
· Electronically Controlled, Variable Ignition Timing: For exact ignition advance control at all throttle positions and RPMs.
· Direct Ignition: For more efficient combustion.


The Jet Pump Propulsion System
· The FX Cruiser HO’s 155mm hyper-flow jet pump propulsion system: The three-blade stainless steel impeller is designed to maximize water flow for high performance. The FX Cruiser HO pump configuration provides excellent hook-up and smooth acceleration.
... more