50ft. 2000 Simon Beeson Catamaran

2 WC, Big Bar, Ready for use license with European standards to carry 80 pax.
BUILDER/DESIGNER:
Simon Beeson. Hummingbird Composites, ex Top Sail, St Lucia. The vessel is not a prototype but built to Simon’s specifications. A catamaran designer and builder for 20 years, he has previously built 2 like this one : one currently working in St.Lucia, the other in Malta.
COMPLETION:
July 2000 at Sharpness Docks in the UK. Surveyed by Mike Blackwell of Yacht Brokers Designers and Surveyors Association. Stability Certificate by Cyprus Shipping Bureau 2003. All documents available. This vessel is a Cyprus registered vessel under the SSR. (Small Ships Registration).
Owner comments:
Why did you buy?
We bought this boat because it was ideal for a business. It was ready to use.
What do you love about the vessel?
It’s exceptional space and ease of handling. It can accommodate 80 passengers for a party. It only weighs 18 tons and is very easy to dry dock.
Why are you selling?
We bought a much bigger boat.
HULL IDENTIFICATION NUMBER:
Beam:34’ Draft: 2’ Bridge Displacement:
Engine Volvo Engine HP 110
Eng Model Penta Cruising Spd NADA/high $
Eng Hours:2,400 Max Spd: 9.5 knots Fresh Water Cooled?
Fuel Cap 1500 liters Water:800 liters Holding:500 liters


Accommodations:
Two Single Cabins
LAYOUT:
Layout consists of 1 toilet on port and 1 on starboard, both with washing facilities. Under the fixed canopy there is a bar with large storage spaces under, and large ice cold boxes.
BRIDGE DECK:
Laminate 2x4 crossbeams with spaces filled with polyester block 2 pot 2lb density polyurethane foam. Bottom laminate 1200gm w/roving. Top laminate 5.5 ply topped with 1oz csm. 34x34x4 thick giving 38 cubic feet of foam or just over 1 ton of positive buoyancy.
Galley:
Fridge, very nice bar, lot of places for storage
Sails/Rigging:
Sloop rig (58 ft L.o.A mast with 18ft boom). Large genoa etc. Easily handled by one person from helmsman position.
Main sail in good condition, Genoa in fair condition
Electronics & Navigation Gear:
Helmsman position with instrument console consisting of engine controls, log, depth and switches, GPS, Radar and compass pinacle.
Deck & Hull Equipment:
HULL CONSTRUCTION:
3 laminate of 5.5 plywood (WBP) with an outer layer of 1200gm woven roving, keel section in coremat. All laminated with epoxy and ancamine 2432 catalyst. An external filling also done with epoxy.
INNER HULL:
Laminate 1200 combination mat with polyester. Foredeck same as hull.

Page Views: