Portland Yacht Sales

HOME | SELL YOUR BOAT | USED - PORTLAND AREA | USED - NATIONAL & INTERNATIONAL | NEW YACHTS | SAILBOATS | COMMERCIAL | HOUSES & SLIPS | BUYERS PAGE | APPRAISAL SERVICES | CONTACT US


74' Custom Built Landing Craft Used Boat  Call for price
 4 Images - Click Here to View Slideshow

MFG: Custom Built
Model: Landing Craft
Length: 74 ft. 0 in.
Year: 1985
Contact Seller

Details
Length: 74 ft. 0 in.
Propulsion Type: Inboard
Hull Material: Steel

Extras
More Information
LOCATED IN USA …

Type: Landing Craft
Twin General Motors 8V92 Diesel Engines – 390hp each
Cruising Speed: 9 Knots
Maximum Speed: 11 Knots

LOA: 74'
Beam: 21' 1"
Draft: 5' 3"
Hull: Steel

Main engines have just been installed after the original 12V71’s were removed.

The repower was made with a pair of Detroit Diesel 8V92’s (390 HP each) which were rebuilt in 2005.

These engines have about 1000 hours on them since that time. When the owner had each engine dyno tested and certified.

Marine transmissions are Tonanco TM828 with 2:1 reduction. The gears were removed from the engines and spin tested

Each was certified as being in near perfect condition having performed within the specified tolerances at all rpm’s.

The engine room was stripped of all electrical and hydraulic lines and currently in the process of having new ones installed.

The engines, with the new 10 degree down angle gears, were installed and aligned.
The engine room awaits a new coat of paint before the owner gets on with the hook-up.

The Hull was sandblasted and painted from the water line to the keel. Two coats of epoxy primer and two coats of marine epoxy (Seaguard 6000) were applied. One coat of antifouling (red) has been applied at this time with the second coat of black to be applied after the zincs have been welded on this week.

The propellers were removed and set out to be cleaned and balanced. They are now reinstalled.

The cutlass bearing ere removed and replaced.

Shafts were checked and found to be true and straight.

Stuffing boxes were cleaned of all existing packing and repacked. (Shaft and rudder boxes)

All of the dents and bumps visible on the hulls exterior were cropped and re-plated. Primed and repainted.

The owner has rebuilt about a half a dozen of these in the past ten years and all are still working in different locations around the world.


Portland Yacht Sales would like to earn your business, call us today at 1-877-812-6220 with any questions or for assistance finding your desired vessel.

Portland Yacht Sales is your outlet for commercial vessels. We have worldwide industry connections and can deliver upon virtually any request! “If you don’t call us today we can’t save you any money!”

“Contact us if you have a vessel for sale, we may already have a buyer!”


Request Information
Fill out the small form below. Details above will be sent with this form
to help inform the seller of what interests you.

First Name Last Name Email Phone
Street Address Zip Code
Comments:
Contact: Portland Yacht Sales 1-877-812-6220 - Portland, Oregon - USA
BUSINESS HOURS: BY APPOINTMENT ONLY

CALL US TOLL-FREE ANYTIME AT 1-877-812-6220