Search results

  1. S

    Leroy'S R.I.P. ???

    And look at that.
  2. S

    1980 100hp vs 1986 110hp ignition coils

    I would have to agree.
  3. S

    1980 100hp vs 1986 110hp ignition coils

    I'm a run it till it dies kinda guy but trying a new gauge is the best advice. If that doesn't check out then pull, flatin and change the head gaskets. Lots online about using sandpaper to true them up. Fish on!
  4. S

    Cooling problems

    Alarm is either remote, incorporated in the control box, (most likely) or missing. Do you have a omc/brp tach with check engine lights?
  5. S

    Cooling problems

    Is your overheat alarm working? Have you done a compression check since this all happened? Approximately how long did it run with no water?
  6. S

    Idle / Slow speed timing advancement screw missing?

    Let us know how this goes.
  7. S

    1983 7,5hp evinrude wont start

    And report back
  8. S

    What engine do I have?

    Well I tried.
  9. S

    Power pack killer

    Tough with old wires because the coloring has faded or is gone. Do your best to locate each wire and make sure there going to the right place. Tough but can be done. If you can't find a friend and do it together. One things for sure, don't give up on the old girl because I'm sure she's giving...
  10. S

    What engine do I have?

    Type in Evinrude model number identification code and see what pops up on the Internet. More fun that way!
  11. S

    1971 Johnson 25hp Outboard - 25R71S

    Buy any old brand of outboard switches with a man overboard tether and upgrade it. No one should have to see their boat fly away from them.
  12. S

    Leroy'S R.I.P. ???

    Looks like I got cancelled out and I deserve it. I'll do some investigating and luckily I printed a lot of it.
  13. S

    Idle / Slow speed timing advancement screw missing?

    Take some rubber handled pliers and move the wire near any metal part of the outboard. If it's bad it will spark.
  14. S

    Idle / Slow speed timing advancement screw missing?

    Wires shouldn't shock you unless you stick your finger in the hole or something not that I ever give it the chance. Run it in the dark and watch how it behaves.
  15. S

    Leroy'S R.I.P. ???

    Damn really? Another fellow Washintonian kicked the bucket? Probably got bought out by the "my pillow guy"
  16. S

    Evinrude outboard year

    I'm going with Vic on this one....prove us wrong by doing your own research!
  17. S

    battery charging issue has me stumped

    By the way, let us all see a hog of a fish sometime.
  18. S

    Test propeller

    Their based apon the boat not the motor. For the motor you need to know splines and diameter mainly, try Craigslist or call a prop shop.
  19. S

    battery charging issue has me stumped

    The easiest way to load test the battery cables is to load test the battery cables. Go to the starter side of solenoid or relay and see how many volts you have while cranking. Can't remember the exact voltage but 10.5 volts or so is acceptable and much lower than that it not. If it's lower...
  20. S

    Engine parts

    Boat.....if you answer his questions then your motor might run in minutes. And that's the honest to God truth.
Top