Search results

  1. jimmbo

    Nobody fishing?

    You're a lot further South than I. Today Snowflakes in the air and 3, but it will be warm tomorrow, 11, likely the last day the sunroof will be open, by next week the highs will be -6 and the lows -12
  2. jimmbo

    Boat listing to left

    There is an Engine Trim Tab, and there Transom Trim Tabs. I rarely(never) think of the one on the Motor. Two of my motors didn't have them, or I had taken it off.
  3. jimmbo

    Boat listing to left

  4. jimmbo

    Prop size

    "Flex" That bit of Misinformation has sold Hundreds of Thousands, if not Millions of SS Props. Grab an Alunimium Prop Blade and try flexing it, The put you hand in Water and move it around. Which one Yields to your hand? Which one is stiffer than your hand? If there is any "flexing" of Prop...
  5. jimmbo

    87 Johnson 30

    It will. It just costs a lot more
  6. jimmbo

    87 Johnson 30

    That Motor does have a Shallow Water Mechanism, with a bit of thought, and some MacGyvering, a way to move the Tilt/Trim Lock Lever from the Helm could be devised
  7. jimmbo

    Excessive smoking

    What you consider Excessive Smoke might be perfectly Normal. Myself, I like and want that Smoke as it keeps the Skeeters away, and I love the Smell of Burnt 2 Stroke Oil. It is one of the Finest Scents ever created.
  8. jimmbo

    Prop size

    You probably need to drop to an 18, maybe even a 17. Why do you want a 4 blade? What is the WOT Range for your Engine?
  9. jimmbo

    16ft Glasspar w/65hp 2 stroke

    That Roller, should have been under the Transom, not forward of it. Hooks can develop from that. Unless that boat has some kind of Sentimental Value, you will be money ahead to find another Boat, because it can become a Time and Money Pit of a Restoration
  10. jimmbo

    16ft Glasspar w/65hp 2 stroke

    Likely a rotted Transom. Fractured right at the area where the Glass had been penetrated by screws. That area was likely also stressed by not being supported properly on the Trailer, as shown in the pic. It is a 63 yr old boat, and to be honest, not having rotted Stringers/Transom would be a...
  11. jimmbo

    Evenrude 20Hp ?

    Most Rules are there because of Problems, because there weren't Rules. The Problem with Society these Days, is that some people think they don't have to follow Rules, that they are Special. Legends in their own Minds, but nowhere else In some cases, I think More Rules are Needed, and Severe...
  12. jimmbo

    Evenrude 20Hp ?

    List of Rules. You should read them, and accept them. https://forums.iboats.com/threads/attention-forum-rules-attention.388514/ #8 is likely the one you violated
  13. jimmbo

    Evenrude 20Hp ?

    A Frankinrude Low Tension Ignition rules out a 60s motor, as 73 was the first yr for it
  14. jimmbo

    Bow sitting high

    Two on either side sounds like 4,
  15. jimmbo

    Bow sitting high

    All those batteries in the back are a good portion of the Weight Distribution Issue. Adding Ballast to level the boat is not the Answer, as it just adds weight, and slows you down and burns more fuel. Why 4 Batteries?
  16. jimmbo

    Bow sitting high

    Welcome to iboats How the boat sit moored is dependent on Weight Distribution. Since No One here can examine your Boat, all we can do is offer some ideas/thoughts. How many Batteries does it have? What other Ballast, such as Anchors, have you tossed in the Stern? Have you ever checked for Water...
  17. jimmbo

    Evenrude 20Hp ?

    The Cowl Decals were different between 75 and 76. Some parts can be swapped, but don't go thinking you can easily change an 18/20 into a 25. It can be done but Complete disassembly of the Powerhead is required
  18. jimmbo

    Evenrude 20Hp ?

    It is, well the Cowl Decal, is 1976 The 20 is basically the same as an 18. 22 inch Block 20hp @4500 rpm WOT range 4000-5000 21:12 gearing.
  19. jimmbo

    Which hull brands to avoid

    Properly done repairs(and most aren't) can happen on Glass Boats. Alumimium Boats, are easier to repair. They repair the Aluminium Skins on Airplanes all the time
  20. jimmbo

    Which hull brands to avoid

    I just had a Caddy written off for minor Damage, but the Headlamp Assemblies(Halogen) were over $1000 each. Latest Caddy has LED Headlights and they are even more Pricey
Top