Search results

  1. Bt Doctur

    For discussion, mercruiser v6 , rochester, edelbrock

    pump has not been changed, filter shows nothing. I can understand the rochester being dirty inside but not the edelbrock. I`ll post an update in the spring. This is the same pump that was on the motor when the OP owned it and same carb. Never an issue.
  2. Bt Doctur

    For discussion, mercruiser v6 , rochester, edelbrock

    This is my personal boat and have been working on it for about 2 years. 4.3 ,mechanical fuel pump, rochester 4 bbl. Needed to do a haul so I needed to get off my trailer. Motor would not idle so I did a quick and dirty quick cleaning and had a stable idle. Put the boat in the slip , did the haul...
  3. Bt Doctur

    Another engine temperature issue

    then use a laser to verify temps
  4. Bt Doctur

    Help with 5.7L front motor mount bracket location.

    and for all the rest https://www.mercurymarine.com/en/us/documents/installation-drawings/?category[]=inboard-and-sterndrive
  5. Bt Doctur

    Help with 5.7L front motor mount bracket location.

    https://samerwebapp01apncus01.azureedge.net/mmgw-env-b/filer_public/f9/dc/f9dc5805-d35b-4559-8b1a-5d3f6662d770/57lefialpha_1996-2001.pdf
  6. Bt Doctur

    Help with 5.7L front motor mount bracket location.

    Could always drop the motor in, align everything, spray paint thru the front mounts to mark the new holes. You want the front mounts attacked to correctly locate the new holes or locate the original factory jig plate like this...
  7. Bt Doctur

    Merc alpha1 gen 1 shift cable

    google this: mercruiser shift cable replacement Plenty of video and instructional video Also this: mercruiser manual 6 in pdf
  8. Bt Doctur

    Ive royally Screwed up (I believe)

    When you have an old transom with the snap ring retainer and are replacing the bearing with a new style the snap ring is not used. You just drive the bearing in. Considering Ford has been out of the marine business for a long time, install a late model GM motor that matches the rear mount width...
  9. Bt Doctur

    Impeller housing overheating

    Remove the drive, stick a hose in the inlet and run the motor
  10. Bt Doctur

    Crazy Trim Problem - please help my sanity!

    If your hot wiring the pump motor and it runs, motor is good. If the relays are clicking , your powering up the coils ,there working. What your missing is the main power to the relays to operate the pump . Guessing your have the small cube type relay?
  11. Bt Doctur

    Raw water hose to impeller part#

    1 1/4 wire wound hose , bulk is correct. just buy the length needed
  12. Bt Doctur

    Owners manual for an 03 Sea Ray 176 w 3.0 Mercruiser?

    https://www.manualslib.com/manual/755380/Sea-Ray-175-Sport.html
  13. Bt Doctur

    470 Distributor Mechanical Advance

    If iboats does not sell those parts, whats the issue with posting a link?
  14. Bt Doctur

    470 Distributor Mechanical Advance

    I`m not positive but I think the innards are GM 4 /6 cylinder dist parts
  15. Bt Doctur

    470 Distributor Mechanical Advance

    http://advanceddistributors.com/wordpress1/
  16. Bt Doctur

    470 Distributor Mechanical Advance

    If its still points, pull the dist and examine it
  17. Bt Doctur

    how to remove prop shaft seal on a duoprop DPS-A ?

    file:///C:/Users/Edeward%20J/Downloads/1c3b037a1187fdbab46fc810973749%20(1).pdf
  18. Bt Doctur

    Ford to Chevy Shiftplate Relocation

    your old setup usually bolted to the rear flywheel housing but the lower shift cable is not a mercruiser cable . What drive is on it? How much room is in front? click to enlarge
Top