Search results

  1. T

    I cant get this throttle set up properly. Please advise.

    Not saying it’s your problem but cables that are too long will be difficult to adjust. Do you have any excessive loops in your 24’ cables?
  2. T

    what is going on.....

    With a little luck they closed down for maintenance or something 🤞
  3. T

    warm start issues with 89 30hp Evinrude

    The lever should be in line with the solenoid body
  4. T

    warm start issues with 89 30hp Evinrude

    I forgot to mention that the primer solenoid is repairable with a kit if you feel it’s leaking
  5. T

    warm start issues with 89 30hp Evinrude

    My next thought would sticking float or needle and seat not sealing. The primer valve in not in the manual position correct?
  6. T

    warm start issues with 89 30hp Evinrude

    It would be odd with no other symptoms but if the tank is building some pressure due to not venting completely it could possibly push the fuel through to the carb. Jmo
  7. T

    1990 90HP Pontoon, 4300 RPM at WOT, Do I need a new prop?

    I have heard that Piranha Props can send you different pitched blades for you to try out and you only pay for the ones you keep. Personally I can’t wrap my head around a plastic prop but they are supposedly tough and if one blade should break and get damaged you only need to replace that blade...
  8. T

    1990 90HP Pontoon, 4300 RPM at WOT, Do I need a new prop?

    Do you by chance have a marina close by that will let try different props? My locals do but I’m also on a small island and good customer service word of mouth travels fast so they do their best to provide a good service. Maybe worth ask around.
  9. T

    1964 9.5 HP Evinrude

    It’s not that uncommon on a motor of that age. Unburnt fuel and oil makes it way out the exhaust. Any pic of the slick to see how much your talking about?
  10. T

    Dog gps trackers

    Glad you found the pups. Mine refuses to get off the couch so I have no worries. I was thinking a hunting group or forum as well. Probably be a good place to start anyway. Best
  11. T

    1992 6hp rewind starter housing

    You could try Tim’s outboard parts. They have used parts.
  12. T

    VRO Failure & Life Expectancy

    You raise a really good question Flyingscott. I have purchased stuff from master tec and have always had a great experience.
  13. T

    VRO Failure & Life Expectancy

    I vote for poor quality materials and fuel. Things just aren’t what they used to be. Every company is looking to save a few bucks at the consumers cost.
  14. T

    1957 Evinrude 7.5HP Missing at low throttle

    Yea the super glue and baking soda is an amazing thing. I use it all the time for wood repair. I even did it in layers once and drilled and tapped and its still holding up years later.
  15. T

    Need help to id the motor

    Run away! Run far away! Unless you have lots of spare time and money that’s going to be a project you wish you never started. JMO
  16. T

    Long or short shaft. ( opinion )

    Looks like it’s in good shape and a fun project Enjoy
  17. T

    96 Evinrude 50 cutting out

    A google search showed me your motor with the number you provided.
  18. T

    j200txeoc JOHNSON wont start

    If you don’t have one you will want one. It can save your life and others. It’s the law in most places and can come with a fine if you don’t have it.
  19. T

    j200txeoc JOHNSON wont start

    Yes it would be on the controls or somewhere on the helm. Usually a red in color with a black connector. I had to ask as they sometimes get stepped on or bumped into and come off. No lanyard no spark.
  20. T

    j200txeoc JOHNSON wont start

    Sorry but have to ask Is the safety lanyard in place? It does happen so don’t take offense.
Top