Search results

  1. Grub54891

    Trouble with a used bayliner discovery 192

    What motor, what drive? How about some pics of the rig?
  2. Grub54891

    Larson Composite Transom Leaks?

    Sorry, they were not composite transoms. I misread the post. But we had a composite dock at the cabin, it warped and cracked over a few years, but cosa board is a different material. It's a resin infused plastic of some kind? I'm still doubtfull about that kind of material as it can warp over time.
  3. Grub54891

    Larson Composite Transom Leaks?

    just had two at the shop, both didn't leak at rest. under way yup, the torque from the drive flexed the transom enough to make it leak. The transom's need to be rebuilt.
  4. Grub54891

    Rear Motor/Transom Plate Mount Problem

    Hey, we all make mistakes.... Repeating said mistake is the problem.
  5. Grub54891

    Alpha one Gen II upper steering bushing

    You can, also since you have it apart, simply drill a new grease fitting into the area if you want.
  6. Grub54891

    suggestions on removing fuel from tank

    What Bondo said. However no big deal to leave it in there if its new. I do all the time and it's fine.
  7. Grub54891

    Inconsistent bogging/acceleration until it hit around 20mph - Mercruiser 5.7l

    You need to find a good mechanic. I have had the module get stuck like that, in my car, couldn't get the timing right, and poor performance. At that point it must be replaced. As sated, find a mechanic who knows what they are doing. I personally work on mercruiser's, volvo's, deisel motors, and...
  8. Grub54891

    Dry Launch

    I just unplug them when backing in. seems to work fine.
  9. Grub54891

    Bought this boat from Auction need help!

    Plastic thru-hulls are not allowed per abyc standards for below the water line use. An older boat will have them, and they may be grandfatherd in. They will break easily as they age and sink you in a hurry.
  10. Grub54891

    HELP.... Broken Tilt Quadrant

    Yup. I missed that part.
  11. Grub54891

    HELP.... Broken Tilt Quadrant

    You are not going fishing.
  12. Grub54891

    Carburetorated engine running rough after day on lake

    As suggested, more like a fuel/carb issue. But I've also seen the weights in the dizzy under the trigger plate go south, timing will be affected. Just another tidbit to check out when all else fails.
  13. Grub54891

    steering wheel play, 1998 chaparral 240 cruiser Merc 5.7

    I second the tiller arm. Most tech's don't know it, but it should be checked when the drive is serviced. There is a torque spec for the pinch bolts. If they are loose, it will eat away at the square arm and ruin it.
  14. Grub54891

    Carburetorated engine running rough after day on lake

    Is this a new to you boat? And if so, how long did it sit before you got it? And how about a model/serial number of the motor? If you just aquired the boat, we can diagnose with a few questions.
  15. Grub54891

    How to fasten clear vinyl sheets to plastic lattice?

    I should have mentioned, I use stainless staples. They don't rust... Sorry.
  16. Grub54891

    Is this repairable? Outdrive Chip

    Mines been that way for years. The fish don't care.
  17. Grub54891

    Hole repair in a boat deck

    Install a deckplate over the hole...
  18. Grub54891

    Pumping lake water into water holding tank

    i would not. There would be debris possibly in the water, that would damage the pump, alge would soup up the system, and smell bad. Cleaning tablets may work but reguardless, I wouldn't do it.
  19. Grub54891

    Popping noise when use trim

    Because the bushings get lubed by the water. My brother in law would dip his fishing reel in the drink if it squeaked. It worked till he got home and cleaned/lubed it up later.
  20. Grub54891

    How to fasten clear vinyl sheets to plastic lattice?

    Why don't you just build a frame that the clear plastic can be installed on, then in the spring you simply remove them and store them?
Top