Search results

  1. C

    2002 115hp Johnson

    Varying voltages to different parts ? Varying resistances. DISCONNECT battery terminals !!........... THen using the correct tool. RETIGHTEN ALL SCREWS.............. All of them. Re tighten all butt splices and any wire ends held down by a screw or bolt. INCLUDING any big negative cables and...
  2. C

    Question Spooling an old Senator 4/0 Reel with no Level Line.

    That stretchy type of fish line, can distort the side walls, of some reel spools. Respooling a reel on a hot sunny day ? Is a great way to create MASSIVE pressure on each layer of deeper line. I have had mono look so bad when a big fish ran out 1/ 2 the spool. That I finally converted to braid...
  3. C

    Trailer Rollers

    I also use guide on vertical pipes. 4 on each bigger trailer. They allow a easy perfect ride. Right into the bow chock. Wind or current.
  4. C

    Question Spooling an old Senator 4/0 Reel with no Level Line.

    Tackle shop will do a better job. Than most people on a baseball field.
  5. C

    2002 115hp Johnson

    Battery is going intermittent ? Check date on it. Corroded battery posts and clamps on the posts.
  6. C

    Trailer Rollers

    The bow rollers are always thicker and tougher. Look that way.
  7. C

    1973 4hp Evinrude

    Probably Most Faraday Cages.
  8. C

    1973 4hp Evinrude

    IT may be a magnetic field collapsing strap. They speed up the response of a wire wound magnetic field.
  9. C

    Starts and idles fine, but cannot get full speed (1985 Johnson 140 hp - J140TLCO)

    Next time out move the throttle to something higher than the limiting speed position. Apply choke enrichment by pushing in the ignition key. Do that at different throttle lever positions. Any speed increase for a second ? Check that the throttle cable is still fully connected, correctly, at the...
  10. C

    Trailer Rollers

    I have never seen a selection of different V angles and widths.
  11. C

    Starting Delay 1986 Johnson 150 HP Crossflow V6

    Clean BOTH battery posts & cable clamps on them.
  12. C

    Trailer Rollers

    How great is the frame metal ? Rust thru in weld locations ? Rusty roller brackets ? I change keel & bow rollers to the very tough yellow Polyurethane type. Rest can be anything.
  13. C

    Outboard fuel range

    Not needed if you can walk on water. :)
  14. C

    Need help

    I am buying the 3 Mile Island Power Plant. Could someone give me good ideas on starting it up ? I have no experience with reactors. Thank you.
  15. C

    1984 Mercruiser 470 Starting Issue

    Why do people buy a not starting / running boat ? They would not buy a car like that.
  16. C

    Starting Delay 1986 Johnson 150 HP Crossflow V6

    You have to do the tests to determine the intermittent none starting. Need 2 people. 1 on the key switch. YOU with the meter leads on the large current carrying terminal of the starter. START !! Read the voltage on the large motor terminals. Any click heard ? What is the battery voltage...
  17. C

    Wiped cam lobe mechanical fuel pump

    :):)
  18. C

    Nissan 6hp won’t lock in reverse ( prop sucks up )

    Never saw or heard of that problem on any motor. Must be that someone REMOVED the latching system parts. Very dangerous when docking. By chance is it a swiveling around motor for reverse ? Like old small Johnson motors ?
  19. C

    Mirrocraft 12’

    Do you have any idea what a BLINDING and constantly annoying reflection polished Aluminum is ??? I do. I removed the Aluminum mirror reflecting constantly on sunny days. I love the NO NO cleaning, waxing or polishing of the boats. (y)
  20. C

    Best Bumper Type and Size for Pontoon

    As long as you can get to the boat before BAD BAD weather wil slam the boat around. People NEED to watch boats being slammed against docks with fenders tossed up on the floating docks. Or high winds pulling on dock lines. Then you can NOT go out and change lines and fenders. I have fenders...
View older results
Top