Search results

  1. Bondo

    No dipstick on 1989 era 3.0L?

    Ayuh,....... Look in here,.....
  2. Bondo

    trim cylinder issue

    Ayuh,.... Sounds like it oughta work,...... til it don't,....
  3. Bondo

    trim cylinder issue

    Ayuh,...... Just run it up, 'n down a few times, keeping the tank full,......
  4. Bondo

    New engine will not throttle up 350 mag mpi

    Ayuh,...... Welcome Aboard,...... Lack of fuel killed the 1st motor, so I'd start there,..... Start at the fuel tank, through the dip-tube, anti-siphon valve, the fuel lines, fuel filter, all the way to the injectors,.....
  5. Bondo

    No dipstick on 1989 era 3.0L?

    Ayuh,....... I agree, the 1st thing to do on a 3.0l, is to add a canister type fuel filter,....... But,....... The one in yer picture can't be used on an I/O powered boat,.... It's gotta be a metal canister,..... The one in the picture, Can be used on an Outboard powered boat,....
  6. Bondo

    No dipstick on 1989 era 3.0L?

    Ayuh,.... Haven't looked over many newish cars lately, eh,..?? Dipsticks have been disappearing for well over the last decade,.....
  7. Bondo

    Shifts into reverse but won't shift into forward

    Ayuh,..... How long has it been since the lower shift cable has been replaced,..??
  8. Bondo

    Alpha Gen2 vs Alpha Gen+

    Ayuh,.... It's a Gen. II,.....
  9. Bondo

    5.x GX Parts Issues

    Not necessarily,..... Sun rots rubber, motors rarely see sunlight,..... Unless yer seeing cracking, or rot, they'll probably be just fine for a long time to come,....
  10. Bondo

    Proper Oil For Oil Bath Hubs

    Ayuh,...... I use the same oil as I use in the outdrive,.....
  11. Bondo

    volvo penta 5.0 gxi-g Starter rebuild

    Ayuh,..... I've had Great luck with DB,....
  12. Bondo

    volvo penta 5.0 gxi-g Starter rebuild

    Ayuh,..... Ditto what Scott said, especially the quote above,.....
  13. Bondo

    Which exhaust manifold gasket?

    Ayuh,..... Looks like they'll clean up,..... My local Machine Shop has a huge belt sander with a flat table to get 'em smooth, 'n Flat, so the gaskets can seal properly,....
  14. Bondo

    Which exhaust manifold gasket?

    Ayuh,...... Either of those shown will probably work, just fine,..... But, in My book, if you want the best available, you can't go wrong, with Fel-pro gaskets,...... Fel-pro gaskets for yer application,.... Btw,... yer manifold to riser gaskets failed, possibly time for fresh manifolds,...
  15. Bondo

    Looking for alignment tools

    Ayuh,..... No special tools, just the usual mechanic's tools,.......
  16. Bondo

    Can't slide the remote into forward gear.

    Ayuh,.... No, it shouldn't matter,.... So the upper is still on the boat,..?? Have you inspected where the upper, 'n lower join together to see everything is free to move,..??
  17. Bondo

    Boat value

    Ayuh,...... In my world, it might be worth $1500. to 3500. in the month of May,..... The big downsides are, it's Ford powered, with an antique drive,....
  18. Bondo

    Engine dieseling

    Ayuh,....... Based on What,..??
  19. Bondo

    Engine dieseling

    Ayuh,..... Just because it might says Vortec on the valve covers, count the intake bolts to know they're Vortec heads,.... If they are, go with the MR43LTS spark plugs,....
  20. Bondo

    Engine dieseling

    Ayuh,..... I merged yer threads to keep yer info together,..... no need to start a new thread,... If yer intake manifold has 12 bolts, those are the right plugs,.... 1996 was a transition year, if there's only 8 bolts, you have Vortec heads, which run the longer MR43LTS plugs,....
Top