Search results

  1. matt167

    Building a tribute boat to my grandfathers 1963 Custom Craft Sea Ray

    I was in the process of restoring my grandfathers 1963 Custom Craft Sea Ray ( cap off, total rebuild ) when the building it was in collapsed last winter. My grandfather bought it new and gave it to me thinking it was ok, but he did not realize/ understand it needed a transom/ stringers/ floor (...
  2. matt167

    Solar small canal boat possible?

    My Custom Craft Sea ray, which was in the process of restoration was destroyed last year when the tent garage collapsed in a heavy snowfall while I was away. Sucks, but all that is savable is the engine and the rear fin section of the cap, which I will graft onto a T bucket when I build one at...
  3. matt167

    How to select correct SEI drive?

    My dad has a 1970 ( I think ) Starcraft Offshore V 18 with Mercruiser 125hp I/O. The out drive went bad 2 years ago. Last year he bought a rotted parts boat and swapped the out drive onto it. The outdrive lasted 2 outings before filling itself full of water. I don't know if he just replaced the...
  4. matt167

    Buying boat sight unseen?

    Well, MBS kicking in again, and I've been scanning Ebay and CL for inexpensive boats that won't take much to get running.. Found what I know is a Wellcraft V20 bowrider of an unknown year. It has a 165 Mercruiser 6cyl and has the old Mercruiser trim switches so it's mid-late 70's at best...
  5. matt167

    buying abandoned land?

    Have a good friend that wants to buy some land. 5-10 acres of anything that can be built on but she has very short money for it ( $1-2k per acre ) I know that nothing is going to be 'for sale' in her price range around here and have found some abandoned looking properties with fallen down...
  6. matt167

    New tow vehicle

    My '95 K1500 had some driveline issues. Binding in reverse, possibly trans, or other. Also had a frame that was getting bad and it was all pretty rusty.. Was eyeballing a 2003 1500 4x4 with the 5.3L with 110k and was a RCLB but it also had some rust showing that was waiting to come through and...
  7. matt167

    '64 650 shift shaft screw up

    I was changing the shift shaft bushing on my '64 650 earlier. Got a brand new bushing, brand new OEM bushing tool all so I wouldn't screw up. Well, I had to pull off the tilt interlock peices, and wasn't thinking and turned them while I was pulling them up, and it turned all the way over and...
  8. matt167

    how to remove paint on lower unit?

    My '64 650 lower unit had what I thought was a scratch but it does catch on a fingernail, does not weep oil or anything like that, but I want to remove the paint around it to see if it is a crack or not as the lower did have a bit of water in it so freeze crack would have been a possibility tho...
  9. matt167

    How to keep shift shaft from falling out during shift bushing swap?

    I pressure tested my old Merc 650 lower unit and only the shift shaft seals are leaking. Now I plan on getting the correct tool and a new bushing assembly with a new seal and oring right on it, rather than just a new seal and oring because it will be quicker with less chance of bad things...
  10. matt167

    Is the Hudson considered brackish?

    I was reading something on old Mercury's saying that it's not good to run them in brackish water and I understand why because of the plain steel driveshaft ect... That got me thinking, the closest body of water to my house is the Hudson river and I was planning on being able to use my boat there...
  11. matt167

    Lower unit screw, opposite side of vent/drain, above cav plate. What is it? '64 650

    Not really thinking too much about it, I pulled the screw on the opposite side of the drain/ vent screws that is above the cav plate, it's a barrel screw ( no head ). Oil did come out of it, but obviously knew it wasn't right when I found the screw marked 'vent'.. Is the LU going to fall apart...
  12. matt167

    Found another boat, MBS kicking in.. worth it?

    Found a boat on Ebay that will probably go cheap and if it does, might go get it. Custom Craft will be restored first and I will always keep that boat, but a 15'3" runabout with fins on the back is not as versatile as I would like... Anyway, due to the Custom Crafts construction, I bought way...
  13. matt167

    Remote oil filter bracket instead of Sierra marine fuel water seperator 'kit'

    I have a Transdapt oil filter relocation adapter ( filter side ) for a Ford which I will probably never use and is brand new. Will it work with the Sierra marine fuel/ water seperator cartridge # 18-7919? It has std Ford 3/4-16 filter thread but I can't find what threads the Sierra cartridge are.
  14. matt167

    Tandem portable gas tanks with one tank non OEM?

    Is there an adapter to make this switch using one fuel line, or do I need 2 fuel lines?.. 1964 Mercury 650 and I have an original Merc 6 gallon tank, want to add a mid 60's Elgin as a spare tank and use 1 line if possible. The Merc tank has the 1/4 turn connector..
  15. matt167

    Are ratchet straps legal for transom straps?

    I'm possibly buying a cheap 'flipper' boat that I can use to get on the water once or twice for this season and then sell beginning of next season.. It does not have transom straps on the trailer and I don't have a set of 'good' transom straps but have probably 20 ratchet straps including some...
  16. matt167

    retrofitting battery ignition distributor onto old Mercury magneto distributor drive?

    I've had this thought for a while.. Everything in the KD-1 magneto is NLA and all pretty expensive used.. I had an idea a while ago and talked with a machinst I know at that time about putting the distributor head from a marine I/O engine like a 3.0L Merc and lock the timing with screws thru the...
  17. matt167

    decrepid starcraft located

    Well, following the signs to a lawn sale way out in the middle of nowhere, and at the end of a long driveway I saw a Starcraft Holiday OB, with the vegetation just starting to grow in it.. On a trailer but no motor. I think it's the 22' model but it's at least 18'.. Looks complete and has a late...
  18. matt167

    Holesclaw trailer vin location?

    The old Holesclaw trailer that my 1961 Custom Craft Sea Ray is sitting on and also original for that boat will need a lost registration applied for. It should not be a big deal since my grandfather gave me the boat and was the owner since new but both the registration for the boat and trailer...
  19. matt167

    cool project boat

    1960 whitehouse ? 1960 Whitehouse or other. He says he has documentation. Looks like the last of the finned era in a cabin cruiser. Fiberglassics does not show a Whitehouse exact but a Colombia has many of the same lines
  20. matt167

    Chugger boat?

    I'm thinking a bit into the future, but also more curious than anything. Browsing Youtube as usual and found somthing that I'd like to build. Originally ran across just shanty boats, but then ran across the Chugger, not the older commercially built 16', but rather the home built 1 from Lewis...
Top