Interlux Epoxy Resin, Gallon
Part:Mfg HT9000G, iboats IB00005124, UPC 081948929004
Ships: In 1 Business Day
- High strength and durability is suitable for sheathing, laminating, filling, fairing and gluing
- Low viscosity formula for ease of mixing and wet out
- Good compatibility with a wide range of laminates and cloth types
- Range of curing agents adapted to different climates or application environments, with simple 4:1 mix ratio, good flexibility
- Solvent free, phenol free, and low odor, for a safer, cleaner working environment
- Good water barrier properties, can be used above and below the waterline
The Epiglass HT9000 system can be used for gluing, laminating, sheathing, filling and fairing. The system is available with slow, standard and fast speed hardeners to allow for a greater variety of working temperatures and conditions.
Epiglassr has always been at the forefront in the supply of epoxy resin products for boat use. As far back as the 1950's, Epiglassr resin technology was amongst the first to be developed specifically for marine use.
The Epiglassr system of epoxy resin, hardener and powder additives can be used for a wide variety of jobs on the boat. Epiglassr can be made to act as a base for varnish, glues, fillers or laminating resin. So if you are restoring an old boat, building a new one or simply keeping your boat in a state of good repair, Epiglassr can help produce high quality, long lasting results.
|Common Uses of Epiglassr Epoxy System||HT9000 Epiglassr Resin Mix||HT120 Glue Blend||HT450 Filler Blend|
|Filling and Filleting||YES||YES||-|
|Fairing; Filling Above Water||YES||-||YES|
|Fairing; Filling Below Water||YES||-||YES|
|Type of mix required by volume||HT9000 Epiglassr Resin Mix||HT120 Glue Blend||HT450 Filler Blend|
|Low Viscosity Blue Mix||1||0.75||-|
|High Viscosity Glue Mix/ Fillet Mix||1||1.5||-|
|Filling or Fairing||1||-||3|
|Note: The above chart is parts by volume of additive to mixed resin and hardener. Volume can be altered to suit a particular job.|
|Calibrated pumps are available as a convenient and easy dispensing system for Epiglassr. Pumps avoid spillage and contact of the resin and hardener with skin when mixing, an important factor when using epoxy material.|
|1||Mix by volume, four parts resin to one part hardener. (When using Epiglassr pumps, one stroke from each pump will deliver the proper 4:1 ratio.) Ensure pumps are fully primed as product may drain out between uses.|
|2||Stir slowly and thoroughly.|
|3||If necessary, add the appropriate fillers to achieve consistency desired.|
|Temp||Pot Life (100gms)||Thin Film Cure|
|Fast HT9001||Standard HT9002||Slow HT9003||Fast HT9001||Standard HT9002||Slow HT9003|
|50°F (10°C)||45 min||NR*||NR*||7 hrs||NR*||NR*|
|77°F (25°C)||14 min||27 min||55 min||2.5 hrs||3.5 hrs||20 hrs|
|95°F (30°C)||8 min||11 min||27 min||45 min||1.75 hrs||6 hrs|
|Fast HT9001||Standard HT9002||Slow HT9003|
|Minimum Application Temp.||50°F (10°C)||55°F (13°C)||60°F (15°C)|
|Mixing Ratio (Resin Hardener)||4:1||4:1||4:1|
|*NR - Not Recommended|
Disclaimer: Charts apply to Interlux products only. The information provided is not intended to be exhaustive. Because iboats.com does not know how this information is being used, they cannot take responsibility for any actions as a result.
The performance of marine paint on many factors outside the control of iboats.com, including surface preparation, proper application, and environmental conditions. Therefore, iboats.com cannot guarantee this product's suitability for your particular purpose or application.
By purchase or use of this product, buyer agrees that the sole and exclusive remedy, if any, is limited to the refund of the purchase price or replacement of the product at iboats.com's option.
Most products and orders placed before 1 PM MST leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.