Interlux Goldspar® Satin Varnish
Ships: In 1 Business Day
- Goldspar quality interior varnish with a satin finish
- Good flow-out and fast drying for easier application
- Produces a warm, rich sheen finish which resists scratches and alcohol stainsresistant
- For interior use: counters, cabinets and tables
- Excellent handling qualities enable truly professional results
Wood Care Systems
Wood has a beauty that good maintenance will enhance and protect. Interlux has several systems for caring for the wood on your boat. All of the systems will provide a barrier to protect your boat against the elements which attack the surface during the season - sea, sun, rain and wind while enhancing the natural appearance of the wood.
Varnish
Varnishes provide excellent protection for the wood on your boat while allowing the natural beauty of the wood to show through. Varnishes are made up of five specific ingredients: oil, resin, solvent, dryers and additives. The combination of these five determines a varnish's performance.
Goldspar® Satin is a low luster modified urethane varnish designed for application to interior wood surfaces. Can be applied by brush or spray.
Common Problems | Perfection Varnish | Schooner® | Goldspar Clear | Goldspar Satin | Original |
High-Gloss, Professional Looking Finish | YES | YES | YES | NO | YES |
Best for Interior Wood | ★★★★★ | ★★★★★ | ★★★★★ | ★★★★★ | ★★★ |
Best Scratch Resistant, Exterior Decking | ★★★★★ | ★★★★ | ★★★★ | NO | ★★★ |
Interior & Exterior | YES | YES | YES | Interior Only | YES |
Durable & Long Lasting | ★★★★★ | ★★★★ | ★★★★ | ★★★ | ★★ |
Apply Directly onto Existing Varnish | YES, if exixting varnish is a two-part | YES | YES | YES | YES |
Thinners Needed | 2333N | 333 | 333 | 333 | 333 |
Best UV Protection & Yellowing Resistance | ★★★★★ | ★★★★★ | ★★★★★ | For Interior Use Only | ★ |
Best Gloss Renention | ★★★★★ | ★★★★ | ★★★★ | NO | ★★ |
KEY: ★★★★★ Excellent for this purpose ★★★ Good for this purpose ★ Average for this purpose |
Varnish Specification Recommendations | ||||||
Stage | Product | Previously Varnished | Bare Wood | Oily Wood (Teak, Iroko) | Overcoating Time* | |
Previously Varnished | Bare Wood | |||||
Sand | - | 220-320 grit | 80-180 grit | 220-320 grit | 80-120 grit | - |
Pre-Treatment | Perfection, Schooner®, Goldspar Clear, Goldspar Satin, Original | Do not use for this purpose | 1 coat thinned 15-20% | Do not use for this purpose | 1 coat thinned 15-20% | 12 hrs |
Jet Speed | Do not use for this purpose | 2-3 coats | Do not use for this purpose | 2-3 coats | 4 hrs | |
Varnish Choice Follow one complete product scheme | Schooner® | 3-4 coats | 4-6 coats | 3-4 coats | 4-6 coats | 12 hrs |
Goldspar Clear | 3-4 coats | 4-6 coats | 3-4 coats | 4-6 coats | 12 hrs | |
Goldspar Satin | 3-4 coats | 4-6 coats | 3-4 coats | 4-6 coats | 12 hrs | |
Original | 3-4 coats | 4-6 coats | 3-4 coats | 4-6 coats | 12 hrs | |
Perfection | 2-3 coats** | 3-5 coats | 2-3 coats** | 4-6 coats | 12 hrs | |
*Minimum wait time between coats or between overcoating with the next step in the system, at a temperature of 73°F. | ||||||
**Always avoid applying a two-part product onto a surface previously varnished with a one-part varnish. | ||||||
Note Inter-Prime Wood Sealer 1026 can be used instead of a thinned coat of varnish |
Disclaimer: Charts apply to Interlux products only. The information provided is not intended to be exhaustive. Because iboats.com does not know how this information is being used, they cannot take responsibility for any actions as a result.
The performance of marine paint on many factors outside the control of iboats.com, including surface preparation, proper application, and environmental conditions. Therefore, iboats.com cannot guarantee this product's suitability for your particular purpose or application.
By purchase or use of this product, buyer agrees that the sole and exclusive remedy, if any, is limited to the refund of the purchase price or replacement of the product at iboats.com's option.
Please be aware that all products have a production or warehouse lead time. This is the number of business days (typically not including the day the product was ordered) that must pass before the item begins the shipping process. Please see the "Ships: In" information located within the main product description to the right of the product image and below the ADD TO CART button for that particular product's "Ships: In" timeframe.
IMPORTANT: Please note that these timeframes are estimates only based on the latest information provided to us by the manufacturer/supplier. Delays in both material, production and shipping timeframes by manufacturers can vary without advanced notice and while we do our best to keep "Ships: In" timeframes up to date we may not always be able to do so due to a variety of factors.
If a product is needed by a specific date we strongly recommend you reach out to our Sales team (1-800-869-1686) to verify shipping timeframes.
Canadian orders please add an additional 14 business days for processing and shipping. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Click here to see our Standard Shipping Policy
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.