Brushing Thinner 120/T-10 - Pettit Paint

0  Saves
Brand
Pettit Paint
Rating:
65 % of 100
Out of stock
Only %1 left
SKU
IMF-20593

Ships: In 1 Business Day

Need Help? Call 1-800-869-1686

Enamels have high viscosity, which makes application quite difficult. Use a good quality thinner to thin the enamel for easy application using a paint brush. The Pettit General Purpose 120 Brushing Thinner is an ideal choice for use with Pettit, Z Spar and Shipendec solvent-based topside enamels and varnishes.

This antifouling thinner has a moderate evaporation rate, allowing you to paint at your own pace. For best results, mix 10% thinner with enamel.

  • Effectively thins enamel for easy application
  • Mix 10% thinner with enamel
  • Moderate evaporation rate

Specifications

  • Manf. Part # 120Q
  • Capacity: Quart

120 BRUSHING THINNER
Pettit 120 Brushing Thinner is a general purpose thinner for thinning brushing enamels for easier application. Many paints when stored for some time before use will increase in viscosity and should be thinned with a good thinner for normal brush application. The 120 Brushing Thinner evaporates at a moderate rate and is completely out of the paint film in several hours. Surfaces can also be washed with this thinner prior to preparation or painting to remove any contamination or sanding residue.

RECOMMENDED USE:
Add up to 10% of the thinner to any of Pettit's Enamels, Easypoxy, standard undercoaters and primers, and varnishes. Mix in thoroughly.

NOTE:
Pettit manufactures a wide array of thinners to compliment our various coating products. The Thinners are matched to the product, method of application and atmospheric conditions present at the time of application. When application temperatures are high (80°F and above) slow thinners are recommended to improve brushability and flow of the product. Generally, faster evaporating thinners are utilized for spray work to maximize atomization while mini mizing the chances for runs and sags. Faster evaporting thinners are also useful for brush and roller work at lower temperatures (60°F and below) since there is less chance of these thinners becoming trapped under the drying paint film causing blistering at a later date.

Never overthin a varnish, enamel, undercoat, primer or other paint product. Doing so could lead to reduced gloss upon drying or a reduction in the performance of a product. Always follow the thinning instructions given on the label or technical data sheet for the specific product being applied.

Disclaimer: Charts apply to Interlux products only. The information provided is not intended to be exhaustive. Because iboats.com does not know how this information is being used, they cannot take responsibility for any actions as a result.

The performance of marine paint on many factors outside the control of iboats.com, including surface preparation, proper application, and environmental conditions. Therefore, iboats.com cannot guarantee this product's suitability for your particular purpose or application.

By purchase or use of this product, buyer agrees that the sole and exclusive remedy, if any, is limited to the refund of the purchase price or replacement of the product at iboats.com's option.

Please be aware that all products have a production or warehouse lead time. This is the number of business days (typically not including the day the product was ordered) that must pass before the item begins the shipping process. Please see the "Ships: In" information located within the main product description to the right of the product image and below the ADD TO CART button for that particular product's "Ships: In" timeframe.

IMPORTANT: Please note that these timeframes are estimates only based on the latest information provided to us by the manufacturer/supplier. Delays in both material, production and shipping timeframes by manufacturers can vary without advanced notice and while we do our best to keep "Ships: In" timeframes up to date we may not always be able to do so due to a variety of factors.

If a product is needed by a specific date we strongly recommend you reach out to our Sales team (1-800-869-1686) to verify shipping timeframes.

Canadian orders please add an additional 14 business days for processing and shipping. Alaska and Hawaii orders please add 1 additional warehouse processing day.

Click here to see our Standard Shipping Policy

California Prop 65 WarningWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2023 BOATING INVESTMENT GROUP LLC., - IBOATS. All rights reserved.