SR-21 Slime Resistant Fresh Water Antifouling Paint - Pettit Paint
Ships: In 1 Business Day
- Thin Film Technology using Dual Biocides
- No-Drag Coating for Increased Speed
- Easy to Apply and Quick to Launch
- Super slick finish contains Moly-Disulfide and PTFE for reduced friction
- Ultra thin film thickness prevents paint build-up
- Eliminates sanding between coats
- Suitable for use on fiberglass, wood and steel hulls
- Dula Biocide controls hard and soft fouling
This dual biocide product uses both copper and Irgarol to produce a most effective thin film antifouling. SR21 is designed for fresh water usage. This no-drag coating is easy to apply and dries in 15 minutes, ready to launch- instantly. Using a patented "solid lubricant" , fast was never this simple. Colors change after immersion.
All colors shown here are for guidance only. Due to differences in screen displays that are beyond our control the colors on these pages cannot be guaranteed to match the actual color in the can.
SR- 21 Antifouling Paint - Pettit Paint
| Product Information | |
|---|---|
| Product Type | Thin Film, Racing |
| Key Attributes |
•Super-slick racing finish for fresh water or cold saltwater boats •Dual-biocides control hard and soft fouling •Ultra-thin film thickness prevents paint build-up with no sanding required •Contains moly-disulfide & PTFE for reducing friction |
| Coverage | 90 sq.ft/quart |
| Technical Data | |
| Technology & Formulation | Solvent Based, Thin Film |
| Substrates | Fiberglass, Wood, Steel, Lead, Bronze. (For more specific instructions per substrate, please refer to the product data sheet provided below.) |
| Application | |
| Thinner | Isopropyl Alcohol |
| Mixing Instructions | Thoroughly mix - can be thinned up to 10% to ease application |
| Method | Short Nap Roller or Airless Spray |
| Application Temperature | 40°F - 90°F |
| Number of Coats | 3 initial; 1-2 in subsequent years |
| Recoating Information (Recoat/Relaunch) |
DRY TIME (HOURS): To Recoat / To Launch 90°F: 5 / 30 70°F : 10 /60 50°F: 20 / 120 |
| Repaint Information | Pressure wash upon haulout, lightly sand, clean and reapply. (Refer to the Pettit Antifouling Compatibility Chart found below for more information.) |
Associated Products From Pettit Paint:
- Pettit Protect 4700/4701
- Bio Blue 92
- Fiberglass Dewaxer 95
References
SR21 Product Data Sheet PDF
Pettit Antifouling Compatibility Chart
MSDS for SR21 Blue*
MSDS for SR21 Bronze*
*Disclaimer:Information on this material is subject to change without notice. Please visit the corresponding manufacturer's website for updates.
PETTIT INTRODUCES SC-21, A NEW FRESH WATER SPEED COATING FOR BOAT BOTTOMS
SC-21 is an ultra-thin, super slick, low friction paint film for boat bottoms. It is the ideal racing finish for fresh water boats. SC-21 combines copper-bronze powder, Moly-Disulfide, and PTFE to produce a super-slick paint film that reduces surface friction allowing the hull to slide through the water. SC-21 is recommended for use on fiberglass, wood and properly primed steel boats. It is easy to apply and dries in 15 minutes. Color changes upon immersion.
Important highlights:
- SC-21 is designed to provide a similar performance to our 1959 Copper Bronze Racing Finish, but with a much slicker paint film
- SC-21 comes in the same container packaging as several of our two-part paint products, with two cans clipped together
- The top can contains a pouch with a proprietary blend of copper-bronze powder along with highly refined slickening agents
- The slickening agents use in SC-21 are copper-bronze powder, Moly-Disulphide, and PTFE
- The applicator will add the pouch (located in the top can) to the product prior to application
- SC-21 will provide the same or better racing performance as other popular products on the market
- SC-21 Makes a great replacement for VC-17 and SR-21 as they are 100% compatible
Please be aware that all products have a production or warehouse lead time. This is the number of business days (typically not including the day the product was ordered) that must pass before the item begins the shipping process. Please see the "Ships: In" information located within the main product description to the right of the product image and below the ADD TO CART button for that particular product's "Ships: In" timeframe.
IMPORTANT: Please note that these timeframes are estimates only based on the latest information provided to us by the manufacturer/supplier. Delays in both material, production and shipping timeframes by manufacturers can vary without advanced notice and while we do our best to keep "Ships: In" timeframes up to date we may not always be able to do so due to a variety of factors.
If a product is needed by a specific date we strongly recommend you reach out to our Sales team (1-800-869-1686) to verify shipping timeframes.
Canadian orders please add an additional 14 business days for processing and shipping. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Click here to see our Standard Shipping Policy
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.