Seasense Oil Fluid Extractor 6.8 Quarts

2  Saves
Brand
Seasense
$124.29
Out of stock
SKU
IB00608176
Mfg
50091449
UPC
737765914494

Ships: In 1 Business Day

Need Help? Call 1-800-869-1686

Keep it an Oil free work area! Newer design has no pouring restriction. In addition, FKM gaskets seal better against synthetic oils. Ideal for outboard engines, lower drive units, lawn mowers,leaf blowers, grass edger's, snow blowers, snow mobiles, motor cycles, UTV, ATV and even sump pumps. Patented technology simplifies time spent on jobs to extract engine motor oil, gear case or lower unit oils, transmission fluids, brake fluid, hydraulic oil, coolant and even hard to reach areas such as bilge water. Starts pumping immediately within 14-15 pumps on internal chamber to create suction for removal of fluids when being used. No need for continuous pumping vacuum is pulled from internally chamber verses entire volume of tank. Compared to competitive models that can be as much as 30 plus manual hand pumps to pull vacuum suction on entire vessel resulting in greater ease of use. No electrical power required. Evacuate fluid or oils easily. See-through housing allows you to view fluid level. Constructed from polyethylene that is impervious to corrosion and rust. Internal float automatically shuts off suction as to prevent over flowing of unit. Excessive vacuum can be relieved by depressing relief valve, located on top of unit, to eliminate vacuum pressure that is no longer needed to perform the job. Pump handle design is from a rugged t-handle bicycle pump to ensure years of usage. Features folding foot brace at bottom of pump to provide maximum leverage while pumping. Comes with three extraction tubes to remove fluid easily. Latest design change allows for transportation and pouring spout to allow for safe disposal without spilling. Be certain to check with local laws to properly dispose of all fluids! Works well for boats, but will also be suitable for any type of maintenance on semi-trucks, recreational vehicles and others. Simply insert the tube down the dipstick tube to extract oil.

  • Holds up to 1.7 US gallons, 6.5 liters equivalent to 6.8 quarts of fluid/oil. Enough to complete one or multiple engines oil changes.
  • Manual pump only to create a vacuum.
  • Main hose is 40.5" that couples with extra extraction tubes. Two different extension sizes: one 39-3/8" hose and two 33-7/16" hoses for draining. Tubes are easily stored with designated holding space.
  • Improved design- No angle restriction as shown in video that can create potential leakage of older designs.
  • For optimum fluid extraction, warm oil in the engine for no more than 5 minutes in colder climates.
  • Not recommended for use with gasoline!
  • Internal float system automatically shuts off vacuum cycle to avoid overfilling.
  • Recessed handle located at top allows easy pouring.
  • Tethered cap avoids messy spills.
  • Top side oil changes with extraction tubes can now be used on small engines,trucks, RV, generators, four-wheelers, tractors, off road equipment and many other applications.


Oil change pumps

Fluid Oil Change Pump (Video)

See a demonstration with a Boat Oil Change Pump ... Learn More

read less

Please be aware that all products have a production or warehouse lead time. This is the number of business days (typically not including the day the product was ordered) that must pass before the item begins the shipping process. Please see the "Ships: In" information located within the main product description to the right of the product image and below the ADD TO CART button for that particular product's "Ships: In" timeframe.

IMPORTANT: Please note that these timeframes are estimates only based on the latest information provided to us by the manufacturer/supplier. Delays in both material, production and shipping timeframes by manufacturers can vary without advanced notice and while we do our best to keep "Ships: In" timeframes up to date we may not always be able to do so due to a variety of factors.

If a product is needed by a specific date we strongly recommend you reach out to our Sales team (1-800-869-1686) to verify shipping timeframes.

Canadian orders please add an additional 14 business days for processing and shipping. Alaska and Hawaii orders please add 1 additional warehouse processing day.

Click here to see our Standard Shipping Policy

California Prop 65 WarningWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2023 BOATING INVESTMENT GROUP LLC., - IBOATS. All rights reserved.