1993 OMC Starter install wiring

Thordie

Recruit
Joined
Jun 25, 2017
Messages
2
Hi all, Here is a picture of my project, wiring was disconnected when I acquired the boat. Not sure how to reconnect wiring. Here are some picture. I hooked it up like I thought it should, but no power at all. Any help would be appreciated. It's a OMC 4.3. 160hp engine.
 

southkogs

Moderator
Staff member
Joined
Jul 7, 2010
Messages
15,028
You'll need a couple of posts before photos show up. HERE is a tutorial on photos on the forum.

Welcome aboard.
 

Thordie

Recruit
Joined
Jun 25, 2017
Messages
2
So I guess I just wait tell I can post photos, or if you have any advice for me that would be wonderful, Thanks
 

southkogs

Moderator
Staff member
Joined
Jul 7, 2010
Messages
15,028
Is it not getting power as in lights, bilge pump, accessories won't turn on? Not getting power as in the key flips and nuthin' happens? or Yes?
 

kenny nunez

Captain
Joined
Jun 20, 2017
Messages
3,391
Looking at the solenoid, the battery cable @ 12 o clock, the yellow/red goes to the 9 o clock and the remaining wire @ 3 o clock.
 
Top