Hello all, and sorry to bring up this subject again. I am new to boating and beyond ignorant when it comes to boat motors. To preface this, I am running a 2001 Mercury 200 Saltwater series, the motor is 2 cycle carbureted. I had the oil injection system removed and mix the oil with the gas. I am running non-ethanol gas with a 50:1 oil mix.
I've been using mercury conventional oil. Today, I purchased Pennzoil XLF synthetic blend to run in my mercury. The Pennzoil is TCW-3 certified. I was told that my synthetic blend oil will ruin my motor and I should only use mercury. I am going out in the morning and trying to get an answer but I've had three different answers. The boat and motor were purchased used and I cannot find the owner's manual.
I would sincerely appreciate any help. Thank you!!!
I've been using mercury conventional oil. Today, I purchased Pennzoil XLF synthetic blend to run in my mercury. The Pennzoil is TCW-3 certified. I was told that my synthetic blend oil will ruin my motor and I should only use mercury. I am going out in the morning and trying to get an answer but I've had three different answers. The boat and motor were purchased used and I cannot find the owner's manual.
I would sincerely appreciate any help. Thank you!!!