roger3645
Petty Officer 1st Class
- Joined
- Aug 30, 2005
- Messages
- 271
Okay Ive had this issue with this motor since last summer and its driving me nuts. 1975 850 85 hp merc. Problem is itll just cut off while approaching high rpms and then itll start right back up. What Ive done so far: Removed and cleaned carbs, ran 3 treatments of sea foam thru it. Ive jumped the red wire and white wire on the switch box and have done the timing & snyc of mercury inline as posted by Clams. Results: Nice idle in neutral and in gear with a good hole shot. Ive also ran the motor with a different remote control box. I dont suspect it is fuel delivery as I have a good firm ball and have used the gas tank and gas line on another motor with no problem. Compression is good on top 3 cylinders (unable to get to #4). Now the motor does not stall or sputter it just cuts off. Seems electrical. Could it be the switch box? I bought the switch box off ebay and it came off a 135 merc inline 6.