Need part 1988 Force 125, the armature that the advances the timing on throttle up.

[Justtlsnew]

Greetings, I was trying to remove the flywheel from my 1988 125 to replace the stator and I broke the little plastic part under the flywheel where you can adjust the timing advance on throttle up. I don't even know whats its called or how to look it up, anybody have an old more they can take one off or can somebody tell me what it is im looking for or where to find it? Im going to try to upload a photo of the broken part. Thanks for any help you can offer. ok not able to post photo.

 

[Jiggz]

That little plastic end at the top of the towershaft is that what you're referring to? Or is it the little plastic end cap at the end of the timing rod that connects to the trigger plate? If you want to post a pic make sure it is jpg and at the same time resized to about 1M (?) pixel or less.

 

[smoses99]

Try to get a pic on here. I have a complete parts motor, I can help you out

 

[Justtlsnew]

[No message]

 

[Jiggz]

OK, so it's the one on top of the towershaft. Unfortunately, that is a NLA part already unless you can find a used one on ebay. Most people in here ended up fabricating one made of aluminum.

 

[jerryjerry05]

These parts are still available.
Called a control rod end.
At boatsdotnet. or ebay 7$

END-CONTROL ROD F499035

 

[Justtlsnew]

These parts are still available.
Called a control rod end.
At boatsdotnet. or ebay 7$

END-CONTROL ROD F499035

You people never cease to amaze me! Jerry thanks for the info, I order a couple parts from boatsdotnet. Thanks again.