Outboard bracket access cover

dmacph

Recruit
Joined
Jun 1, 2021
Messages
1
I bought a project boat that has an aluminum outboard bracket with an access hole that seems to be an odd size. The cut out hole is 3 7/8". I am looking for a water tight/proof access plate that preferable has a screw out cover. I can not find this size online and really don't want to cut the hole to fit a a larger plate. Does anyone have any suggestions?
 

dingbat

Supreme Mariner
Joined
Nov 20, 2001
Messages
16,529
I bought a project boat that has an aluminum outboard bracket with an access hole that seems to be an odd size. The cut out hole is 3 7/8". I am looking for a water tight/proof access plate that preferable has a screw out cover. I can not find this size online and really don't want to cut the hole to fit a a larger plate. Does anyone have any suggestions?
Have never seen one with anything other than a flat, bolt on cover with a gasket.

Personably, I would not want any type of a deck plate in that application. Hard enough keeping the inside dry as it is
 
Top