Hydrocoat Water/Based Antifouling Paint / Pettit Paint
Ships: In 1 Business Day
Features:
- Multi-season Ablative
- Minimal Odor, Easy Clean-up with Water
- Used on all new Sea-Ray Boats
- Ablative finish reduces coating buildup through controlled erosion.
- Complies with all air pollution (VOC) regulations
- Contains PTFE which reduces drag, resulting in an easily burnished, slick film for maximum hull speed.
The ideal combination of high-speed performance and durability with environmental responsiveness. This product uses water to effectively transfer the paint to your boat. The end result is multi-season protection with easy clean-up and minimal odor.
Hydrocoat is formulated with a 40% cuprous oxide and is tough enough to withstand frequent trailering, launching and beaching. Used by Sea-Ray on all new boats.
Hydrocoat Ablative Antifouling Paint - Pettit Paint
Product Information | |
---|---|
Product Type | Water Based, Multi Season, Ablative |
Key Attributes | •Simply the best water-based ablative multi-season protection •Ablative, self polishing technology eliminates sanding and paint build-up •Environmentally friendly, easy to apply and cleanup with soap & water •Unlimited dry time to launch, can be painted in the fall or winter |
Coverage | 430 sq.ft/gal |
Technical Data | |
Technology & Formulation | Water Based, Copolymer, Ablative |
Substrates | Fiberglass, Wood, Steel, Lead, Bronze. (For more specific instructions per substrate, please refer to the product data sheet provided below.) |
Application | |
Thinner | Water |
Mixing Instructions | Thoroughly mix - can be thinned up to 10% to ease application |
Method | Brush, Roller, Airless or Conventional Spray |
Application Temperature | 50°F - 90°F |
Number of Coats | 2 minimum with additional coat at the waterline recommended. |
Recoating Information (Recoat/Relaunch) | DRY TIME (HOURS): To Recoat / To Launch 90°F: 1.5 / 12 70°F : 3 / 16 50°F: 6 / 48 |
Repaint Information | Pressure wash upon haulout, lightly sand, clean and reapply. (Refer to the Pettit Antifouling Compatibility Chart found below for more information.) |
Associated Products From Pettit Paint:
- Tie Coat 6627
- Pettit Protect 4700/4701
- Bio Blue 92
- Fiberglass Dewaxer D95
Hydrocoat Product Data Sheet PDF
Pettit Antifouling Compatibility Chart
MSDS for Hydrocoat Blue*
MSDS for Hydrocoat Green*
MSDS for Hydrocoat Red*
MSDS for Hydrocoat Black*
*Disclaimer:Information on this material is subject to change without notice. Please visit the corresponding manufacturer's website for updates.
Please be aware that all products have a production or warehouse lead time. This is the number of business days (typically not including the day the product was ordered) that must pass before the item begins the shipping process. Please see the "Ships: In" information located within the main product description to the right of the product image and below the ADD TO CART button for that particular product's "Ships: In" timeframe.
IMPORTANT: Please note that these timeframes are estimates only based on the latest information provided to us by the manufacturer/supplier. Delays in both material, production and shipping timeframes by manufacturers can vary without advanced notice and while we do our best to keep "Ships: In" timeframes up to date we may not always be able to do so due to a variety of factors.
If a product is needed by a specific date we strongly recommend you reach out to our Sales team (1-800-869-1686) to verify shipping timeframes.
Canadian orders please add an additional 14 business days for processing and shipping. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Click here to see our Standard Shipping Policy
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.