Rule-Mate™ Automatic Bilge Pump (Rule)
Ships: In 1 Business Day
With the Rule-Mate Automatic Bilge Pump, you don't have to worry about water in your boat bilge, allowing you to fully focus on your boating. This pump uses two sensors - one that automatically turns on the pump when water reaches a certain height and another one that turns off the motor after the water is pumped out. This bilge will not pump out oil, thanks to its "field effect" sensor.
- Solid state water sensing technology eliminates the need for float switch
- Pump automatically turns on and off
- Does not pump out oil
The solid state water sensing technology eliminates the need for a separate float switch. A snap-off strainer is provided for easy cleaning and the anti-fouling impeller allows for low maintenance and lasting use.
Features of Rule-Mate Automatic Bilge Pump
- Solid state water sensing technology eliminates the need for float switch
- Pump automatically turns on and off to keep the bilge free from water
- Does not pump out oil
- Snap-off strainer for convenient cleaning
- Anti-fouling impeller
- Each pump includes a straight barb hose fitting and a 90ยบ angled hose barb fitting
- 3 years limited warranty
Specifications for Part # RM200024
- Rating: 2000 GPH
- Voltage: 24v
Specifications for Part # RM1100A-24
- GPH:1100
- Hose:1-1/8"
- Volts:24
- Amps:1.7
Specifications for Part # RM500A-24
- GPH:500
- Hose:3/4"
- Volts: 24
- Amps:1.0
Specifications for Part # RM750A-24
- GPH:750
- Hose:3/4"
- Volts: 24
- Amps:1.4
Specifications for Part # RM1500
- Rating: 1500 GPH
- Voltage: 12V
- Hose diameter: 1-1/8"
Specifications for Part # RM750A
- Flow Rate: 750 gph 2839 lph
- Voltage: 12 Vdc
- Amp Draw: 2.7 amp
- Fuse Size: 5 amp
- Height: 4.5 inches 114.3 mm
- Width: 6 Inches 152.4 mm
Specifications for Part # RM500A
- Capacity GPH 500
- Panel Switches 41,43,45
- Volts 12DC
- Amps @12v 1.9
- Amps @13.6v 2.5
- Fuse Size 2.5
- Height (inches/mm) 4 (101.6)
- Width (inches/mm) 5 (127)
- Weight (lbs/kg) 0/13 (0.37)
- Hose Diameter (inches/mm) 3/4 (19.0)
Specifications for Part # RM2000
- Rating: 2000 GPH
- Hose diameter: 1-1/8"
- Voltage: 12V
Specifications for Part # RM1100A
- Rule-Mate, Automated 12v, 1-1/8" Hose Size
- Voltage 12 (Vdc)
- Amp Draw 3.4 (amp)
- Fuse Size 5.0 (amp)
- Height 4.5 (inches )
- Width 5 (Inches )
Please be aware that all products have a production or warehouse lead time. This is the number of business days (typically not including the day the product was ordered) that must pass before the item begins the shipping process. Please see the "Ships: In" information located within the main product description to the right of the product image and below the ADD TO CART button for that particular product's "Ships: In" timeframe.
IMPORTANT: Please note that these timeframes are estimates only based on the latest information provided to us by the manufacturer/supplier. Delays in both material, production and shipping timeframes by manufacturers can vary without advanced notice and while we do our best to keep "Ships: In" timeframes up to date we may not always be able to do so due to a variety of factors.
If a product is needed by a specific date we strongly recommend you reach out to our Sales team (1-800-869-1686) to verify shipping timeframes.
Canadian orders please add an additional 14 business days for processing and shipping. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Click here to see our Standard Shipping Policy
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.