Interlux 202 Fiberglass Solvent Wash
Ships: In 1 Business Day
Product Description:
216 Special Thinner is a fast evaporating solvent which, when added to specified paint coatings, improves drying in cold climates and facilitates spray application. Also recommended for removing sanding residue from hull bottoms, wiping down bare aluminum clean and for the general clean-up of paint equipment. For use with most single part topside and antifouling paints.
Product | Brush | Spray | Cleanup | % Thinner Required | |
Brush | Spray | ||||
Perfection Polyurethane | 2333N | 2316N | 2333N or 2316N | As Needed 5-10% | As Required 25-35% Max |
Toplac Silicone Copolymer | 333 | 216 | 216 | As Required 10% Max | 10-15% |
Brightside® | 333 | 216 | 216 | As Required 10% Max | 10-15% |
Yacht Enamel | 333 | 216 | 216 | As Required 10% Max | 10-15% |
Interstain | 333 | N/A | 333 | As Required | N/A |
Varnishes | 333 | 216 | 216 | As Required 10% Max | 5-10% |
Bottom Paints (conventional) | 216 | 216 | 216 | 10% 1st coat wood only | As Required 10% Max |
Micron® Extra, Micron® CSC, Trilux® 33™, Trilux®, Tri-lux® II, Ultra | 433 | 216 | 433 or 216 | As Required 10% Max | As Required 20-30% Max |
Fiberglass Bottomkote® ACT | 216 | 216 | 216 | 10% 1st coat wood only | As Required 10% Max |
Micron® Optima | 6216 | 6216 | Water | As Required 10% Max | As Required 10% Max |
Fiberglass Bottomkote® Aqua | 6216 | 6216 | Water | As Required 10% Max | As Required 10% Max |
VC® Offshore | 355 | 355 | 355 | 10% 1st coat wood only | As Required 10% Max |
VC 17m® Extra, VC 17m® | V172 | V172 | V172 | 10-15% Max | 10-15% Max |
These are only general requirements. Thinner quality and type vary depending upon temperature and specific application. |
Disclaimer: Charts apply to Interlux products only. The information provided is not intended to be exhaustive. Because iboats.com does not know how this information is being used, they cannot take responsibility for any actions as a result.
The performance of marine paint on many factors outside the control of iboats.com, including surface preparation, proper application, and environmental conditions. Therefore, iboats.com cannot guarantee this product's suitability for your particular purpose or application.
By purchase or use of this product, buyer agrees that the sole and exclusive remedy, if any, is limited to the refund of the purchase price or replacement of the product at iboats.com's option.
Please be aware that all products have a production or warehouse lead time. This is the number of business days (typically not including the day the product was ordered) that must pass before the item begins the shipping process. Please see the "Ships: In" information located within the main product description to the right of the product image and below the ADD TO CART button for that particular product's "Ships: In" timeframe.
IMPORTANT: Please note that these timeframes are estimates only based on the latest information provided to us by the manufacturer/supplier. Delays in both material, production and shipping timeframes by manufacturers can vary without advanced notice and while we do our best to keep "Ships: In" timeframes up to date we may not always be able to do so due to a variety of factors.
If a product is needed by a specific date we strongly recommend you reach out to our Sales team (1-800-869-1686) to verify shipping timeframes.
Canadian orders please add an additional 14 business days for processing and shipping. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Click here to see our Standard Shipping Policy
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.