Interlux Premium White Yacht Enamel
Part:Select Option & Size
Ships: In 1 Business Day
- Traditional alkyd-based marine enamel
- Bright, high gloss finish
- Excellent flow and levelling properties
- Superior hide, gloss and color retention
These high quality, topside alkyd-based enamels have been proven performers for over 40 years. Premium Yacht Enamels are superb for yacht applications including topsides, decks, fashion striping and boot tops.
They are easily applied straight from the can with brush or spray over properly prepared new or previously painted wood, metal or fiberglass surfaces. A tough finish is achieved that normally lasts 2-3 years prior to recoating. Application conditions are not as critical as the high performance coatings but the temperature should be above 50°F (10°C).
All paint colors shown here are for guidance only. Due to differences in screen displays that are beyond our control, the colors on these pages cannot be guaranteed to match the actual color in the can.
|How much topsides |
paint do I need?
|Waterline Length (feet)||20||25||30||35||40||20||25||30||35||40|
|2 part products (quarts)||2||3||4||5.5||6||2||3||4||5||6|
|1 part enamels (quarts)||3||4.5||6||8||9||2.5||4||5.5||7||8.5|
|1 part primers (quarts)||4||5.5||7.5||10||11||3||5||7||9||10.5|
|One-Part Paint Systems - Toplac®, Brightside®, Yacht Enamels This preparation scheme provides a good level of protection|
|Clean||Fiberglass Solvent Wash 202 or Special Thinner 216||202||216||216||216||20 min|
|Sand||-||180-220 grit sandpaper||sand blast or disc grind (coarse emery cloth)||80-180 grit |
|sand blast or disc grind (coarse emery cloth)||-|
|Clean||Fiberglass Solvent Wash 202 or Special Thinner 216||202||remove residue |
(with broom or airline)
|216||remove residue |
(with broom or airline)
|Surface Primer||Viny-Lux Primewash 353/354||DO NOT USE||1 coat (thinned)||DO NOT USE||1 coat (thinned)||1 hr|
|Pre Primer||Yacht Primer||DO NOT USE||DO NOT USE||1 coats (thinned 10-15%)||DO NOT USE||8 hrs|
|Primer||Yacht Primer||DO NOT USE||1 coat||-||1 coat||-|
|Surfacing Putty 257||YES||YES||YES||YES||4 hrs|
|Primer||Yacht Primer||DO NOT USE||1-2 coats||1-2 coats||1-2 coats||-|
|Primer/ Undercoater||Pre-Kote||1-2 coats||1-2 coats||1-2 coats||1-2 coats||8 hrs|
|Topcoat||Toplac® or Brightside®||2 coats||2 coats||2 coats||2 coats||12 hrs|
|*Minimum wait time between coats or between overcoating with the next step in the system, at a temperature of 73°F.|
Disclaimer: Charts apply to Interlux products only. The information provided is not intended to be exhaustive. Because iboats.com does not know how this information is being used, they cannot take responsibility for any actions as a result.
The performance of marine paint on many factors outside the control of iboats.com, including surface preparation, proper application, and environmental conditions. Therefore, iboats.com cannot guarantee this product's suitability for your particular purpose or application.
By purchase or use of this product, buyer agrees that the sole and exclusive remedy, if any, is limited to the refund of the purchase price or replacement of the product at iboats.com's option.
Most products and orders placed before 1 PM MST leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.