Lenco Standard Mount Trim Tab Kit

15109-103

Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.

Each kit contains

• 2 actuators w/ 6' lead
• 2 12 Gauge 304 Stainless Steel planes 12" x 12"
• 2 20' Actuator Extension Wiring Harnesses
• 2 each of Upper Mounting Bracket w/ Gland Seal
• 2 each of Lower mounting Bracket
• All Necessary Stainless Steel and Brass Mounting Hardware
  The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
  Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
  Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.

15105-102

Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.

Each kit contains

• 2 actuators w/ 6' lead
• 2 12 Gauge 304 Stainless Steel planes 12" x 12"
• 2 20' Actuator Extension Wiring Harnesses
• 2 each of Upper Mounting Bracket w/ Gland Seal
• 2 each of Lower mounting Bracket
• All Necessary Stainless Steel and Brass Mounting Hardware
  The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
  Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
  Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.

15007-101

Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.

Each kit contains

• 2 actuators w/ 6' lead
• 2 12 Gauge 304 Stainless Steel planes 12" x 12"
• 2 20' Actuator Extension Wiring Harnesses
• 2 each of Upper Mounting Bracket w/ Gland Seal
• 2 each of Lower mounting Bracket
• All Necessary Stainless Steel and Brass Mounting Hardware
• SWITCH SOLD SEPARATELY. See switch selections for available options
  The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
  Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
  Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.

15008-101

Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.

Each kit contains

• 2 actuators w/ 6' lead
• 2 12 Gauge 304 Stainless Steel planes 12" x 18"
• 2 20' Actuator Extension Wiring Harnesses
• 2 each of Upper Mounting Bracket w/ Gland Seal
• 2 each of Lower mounting Bracket
• All Necessary Stainless Steel and Brass Mounting Hardware
• SWITCH SOLD SEPARATELY. See switch selections for available options
  The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
  Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
  Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.

15009-101

Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.

Each kit contains

• 2 actuators w/ 6' lead
• 2 12 Gauge 304 Stainless Steel planes 12" x 24"
• 2 20' Actuator Extension Wiring Harnesses
• 2 each of Upper Mounting Bracket w/ Gland Seal
• 2 each of Lower mounting Bracket
• All Necessary Stainless Steel and Brass Mounting Hardware
• SWITCH SOLD SEPARATELY. See switch selections for available options
  The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
  Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
  Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.

15010-101

12" x 30" Standard Mount Trim Tab Kit without Switch Kit- 12V

Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.

Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.

Kit Contents:

• 2 each of 12-gauge stainless steel trim tab blades
• 2 each of #15054-001 actuator with 6' leads and Deutsch plugs
• 2 each of #30133-103 20' actuator extension wiring harnesses
• 2 each of #15085-001 (116) upper mounting brackets with gland seal
• 2 each of #50014-001 (119) lower mounting brackets
• 1 each of the Lenco owner’s / installation manual
• All necessary stainless steel mounting hardware

Specifications:

• Suggested Boat Length: 34' to 54'
• Length of Tab: 12"
• Width of Tab: 30"
• Hinge Height: 1"
• Minimum Transom Height: 14"
• Blades: 12 Gauge Stainless Steel
• Finish: Smooth
• Switch Kit: Sold Separately
• Class: Fuel Efficient
• Compliance: CE Certified
• Compatibility: Any Boat
• Actuators: 12-volt

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

15108-103

Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.

Each kit contains

• 2 actuators w/ 6' lead
• 2 12 Gauge 304 Stainless Steel planes 9" x 12"
• 2 20' Actuator Extension Wiring Harnesses
• 2 each of Upper Mounting Bracket w/ Gland Seal
• 2 each of Lower mounting Bracket
• All Necessary Stainless Steel and Brass Mounting Hardware
  The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
  Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
  Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.

15104-102

Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.

Each kit contains

• 2 actuators w/ 6' lead
• 2 12 Gauge 304 Stainless Steel planes 9" x 12"
• 2 20' Actuator Extension Wiring Harnesses
• 2 each of Upper Mounting Bracket w/ Gland Seal
• 2 each of Lower mounting Bracket
• All Necessary Stainless Steel and Brass Mounting Hardware
  The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
  Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
  Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.

15001-101

Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.

Each kit contains

• 2 actuators w/ 6' lead
• 2 12 Gauge 304 Stainless Steel planes 9" x 12"
• 2 20' Actuator Extension Wiring Harnesses
• 2 each of Upper Mounting Bracket w/ Gland Seal
• 2 each of Lower mounting Bracket
• All Necessary Stainless Steel and Brass Mounting Hardware
• SWITCH SOLD SEPARATELY. See switch selections for available options
  The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
  Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
  Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.

15002-101

Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.

Each kit contains

• 2 actuators w/ 6' lead
• 2 12 Gauge 304 Stainless Steel planes 9" x 18"
• 2 20' Actuator Extension Wiring Harnesses
• 2 each of Upper Mounting Bracket w/ Gland Seal
• 2 each of Lower mounting Bracket
• All Necessary Stainless Steel and Brass Mounting Hardware
• SWITCH SOLD SEPARATELY. See switch selections for available options
  The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
  Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
  Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.

15005-101

9" x 36" Standard Mount Trim Tab Kit without Switch Kit- 12V

Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.

Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.

Kit Contents:

• 2 each of 12-gauge stainless steel trim tab blades
• 2 each of #15054-001 actuator with 6' leads and Deutsch plugs
• 2 each of #30133-103 20' actuator extension wiring harnesses
• 2 each of #15085-001 (116) upper mounting brackets with gland seal
• 2 each of #50014-001 (119) lower mounting brackets
• 1 each of the Lenco owner’s / installation manual
• All necessary stainless steel mounting hardware

Specifications:

• Suggested Boat Length: 34' to 65'
• Length of Tab: 9"
• Width of Tab: 36"
• Hinge Height: 1"
• Minimum Transom Height: 14"
• Blades: 12 Gauge Stainless Steel
• Finish: Smooth
• Switch Kit: Sold Separately
• Class: Fuel Efficient
• Compliance: CE Certified
• Compatibility: Any Boat
• Actuators: 12-volt

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.