Rustlok 6980 Metal Primer / Pettit Paint
Ships: In 1 Business Day
- Exceptional adhesion to all ferrous metals also including steel, cast iron, galvanized and stainless steel.
- Wets, seals and adheres to firmly attached rust.
- Dries rapidly allowing multiple coats in one day.
- May be applied at temperatures down to 10°F.
GENERAL DESCRIPTION
Pettit 6980 Rustlok Steel Primer is a one package moisture cured polyurethane coating designed for application over any steel or cast iron surface, including galvanized and stainless steel. Rustlok Steel Primer contains aluminum flake pigment which forms a dense, water impervious barrier. The result is excellent corrosion protection. In addition, Rustloks polyurethane chemistry offers tremendous adhesive strength and wetting ability. It is this combination that allows Rustlok to perform well even when applied over rusted surfaces. Rustlok Steel Primer is recommended anytime an easy to apply, effective anti-corrosive barrier coat is desired.
Applied by brush, roller or spray at temperatures ranging from 10° to 100°F. 1 hour dry time between the recommended two coats; 2 hours before recoating with another paint. Approx. gallon coverage: 500 sq. ft.
Rustlok Trailer Paint- Pettit Paint
| Product Information | |
|---|---|
| Product Type | Metal Primer for all ferrous Metals |
| Key Attributes | •Exceptional adhesion to all ferrous metals also including steel, cast iron, galvanized and stainless steel •Wets, seals and adheres to firmly attached rust •Dries rapidly allowing multiple coats in one day •May be applied at temperatures down to 10°F |
| Coverage | Approximately 350 sq. ft./gal |
| Technical Data | |
| Technology & Formulation | Moisture Cure Urethane |
| Substrates | Fiberglass, Steel, Iron, Lead (For more specific instructions per substrate, please refer to the product data sheet provided below.) |
| Application | |
| Thinner | 120 Brushing Thinner |
| Surface Preparation | See product data sheet below |
| Mixing of Product | Mix thoroughly |
| Method | Brush, Roller or Spray |
| Application Temperature | 50°F - 90°F |
| Number of Coats | 3 or more |
| Recoating Information (Recoat/Relaunch) | Temperature to recoat: 10°F 3 hrs. 30°F 21/2 hrs. 50°F 2 hrs 70°F 11/2 hrs. 90°F 1/2 hrs. |
Associated Products From Pettit Paint:
- 120 Brushing Thinner
- Pettit Antifouling Paint
- Pettit Topside Paints
- Metal Primer 6455/044
- Pettit Protect 4700/4701
- Pettit Protect 4100/4101
Rustlok Product Data Sheet PDF
MSDS for Rustlok*
*Disclaimer:Information on this material is subject to change without notice. Please visit the corresponding manufacturer's website for updates.
Please be aware that all products have a production or warehouse lead time. This is the number of business days (typically not including the day the product was ordered) that must pass before the item begins the shipping process. Please see the "Ships: In" information located within the main product description to the right of the product image and below the ADD TO CART button for that particular product's "Ships: In" timeframe.
IMPORTANT: Please note that these timeframes are estimates only based on the latest information provided to us by the manufacturer/supplier. Delays in both material, production and shipping timeframes by manufacturers can vary without advanced notice and while we do our best to keep "Ships: In" timeframes up to date we may not always be able to do so due to a variety of factors.
If a product is needed by a specific date we strongly recommend you reach out to our Sales team (1-800-869-1686) to verify shipping timeframes.
Canadian orders please add an additional 14 business days for processing and shipping. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Click here to see our Standard Shipping Policy
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.