Splash Zone A-788 Two-Part Epoxy Repair Compound - Pettit Paint

2  Saves
Pettit Paint
Out of stock
Only %1 left

Ships: In 1 Business Day

Need Help? Call 1-800-869-1686
Extremely hard, abrasion and impact resistant, two-component epoxy for marine use only. Provides protection against corrosion of metals and erosion and deterioration of concrete and wood above or below the waterline in splash zones. Also can be used as a coating repair of boat hulls and buoys or bridge abutments and on any surface subject to corrosion in salt or fresh water. Not for use in potable water. Used for patching and grouting applications that are not submerged.

Splash Zone Compound Kit - Pettit Paint

Product Information
Product Type Repair Compound / Filler
Key Attributes -So versatile, it has been called “The duct tape of the marine world”
-Use above or below waterline
-Excellent for underwater repairs
-Produces a rock-hard protective surface
-Two-part multi-purpose epoxy patching and repair compound
-Provides excellent protection against corrosion of metals
-Stops erosion and deterioration of concrete or wood
Coverage To Achieve Minimum Dry Thickness 13 sq.ft/gal (25 to 26 sq. ft. per gallon unit = two gallons total volume).
Technical Data
Technology & Formulation Epoxy
Substrates Steel, Fiberglass, Iron, Concrete, Wood, Aluminum (For more specific instructions per substrate, please refer to the product data sheet provided below.)
Thinner Do not thin
Surface Preparation See product data sheet below
Mixing of Product 1:1 by volume
Method Apply by hand. (Wear rubber gloves if sensitive to epoxy or polymide resins). If applying to dry surfaces in air, periodically re-wet hands with water to facilitate application.
Application Temperature 50℉ - 90℉
Number of Coats One
Recommended Film Thickness 1/8" - 2"+
Recoating Information (Recoat/Relaunch) Cure Time in Air or Water at 70℉: Begins to firm up within 2 hours; reaches full hardness in 6 to 8 hours.Curing is slower at lower temperatures. Will not cure and adhere properly at temperatures below 50℉. Do not apply unless temperature will remain above 50℉ for at least 6 hours after application

Splash Zone Compound Kit Product Data Sheet PDF
MSDS for Splash Zone Compound Kit*
*Disclaimer:Information on this material is subject to change without notice. Please visit the corresponding manufacturer's website for updates.

Please be aware that all products have a production or warehouse lead time. This is the number of business days (typically not including the day the product was ordered) that must pass before the item begins the shipping process. Please see the "Ships: In" information located within the main product description to the right of the product image and below the ADD TO CART button for that particular product's "Ships: In" timeframe.

IMPORTANT: Please note that these timeframes are estimates only based on the latest information provided to us by the manufacturer/supplier. Delays in both material, production and shipping timeframes by manufacturers can vary without advanced notice and while we do our best to keep "Ships: In" timeframes up to date we may not always be able to do so due to a variety of factors.

If a product is needed by a specific date we strongly recommend you reach out to our Sales team (1-800-869-1686) to verify shipping timeframes.

Canadian orders please add an additional 14 business days for processing and shipping. Alaska and Hawaii orders please add 1 additional warehouse processing day.

Click here to see our Standard Shipping Policy

California Prop 65 WarningWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2024 BOATING INVESTMENT GROUP LLC., - IBOATS. All rights reserved.