1986 force 125 hp hydrolic controll unit for tilt trim

[erict]

I am looking for a hydrolic controll unit for my 1986 bayliner force 125 hp boat for tilt trim can some one help.

 

[roscoe]

Re: 1986 force 125 hp hydrolic controll unit for tilt trim

Don't know exactly what you are looking for?<br />The switch on the dash or on the throttle control?<br />The wiring harness with the relays under ther motor hood?

 

[erict]

Re: 1986 force 125 hp hydrolic controll unit for tilt trim

Its for the trim motor not the top electrical part but the botom hydrolic half it bleeds down when the motor is up my machanic took it apart and he told me i need the botom control unit

 

[roscoe]

Re: 1986 force 125 hp hydrolic controll unit for tilt trim

Sorry, that part is not available, but your unit is rebuildable if the mechanic didn't screw it up or lose parts. Replace all seals and orings, and springs if possible.<br /><br />Aftermarket motors are available, but not the pump.

 

[NordikWolf]

Re: 1986 force 125 hp hydrolic controll unit for tilt trim

You can get your pump rebuilt for $180 at this site:<br /> http://www.maxrules.com/fixforcetrim.html