Brian Bradford
Recruit
- Joined
- Aug 5, 2007
- Messages
- 2
Hey guys I am new to this forum .
I just purchased a 1999 Champion 203 Dual Console with a 99 Mercury 225 EFI. It has a 3 blade Tempest 25 prop .
Here is my problem:
Before I bought the boat I had a compression check and computer scan done of the engine . The day before the test I went on a test drive and the boat ran great .We got up to around 65 mph no problem.
Today was my first day to get it in the water since I bought the boat. When you take off the motor under load with the motor trimmed all way down it will not turn more that 1500-1600 rpms . I can put it in neutral and it will rev fine . ??????Any Suggestions
Any help would be greatly appreciated
Thanks
Brian Bradford
1999 Champion 203
1999 Mercury 225 EFI
I just purchased a 1999 Champion 203 Dual Console with a 99 Mercury 225 EFI. It has a 3 blade Tempest 25 prop .
Here is my problem:
Before I bought the boat I had a compression check and computer scan done of the engine . The day before the test I went on a test drive and the boat ran great .We got up to around 65 mph no problem.
Today was my first day to get it in the water since I bought the boat. When you take off the motor under load with the motor trimmed all way down it will not turn more that 1500-1600 rpms . I can put it in neutral and it will rev fine . ??????Any Suggestions
Any help would be greatly appreciated
Thanks
Brian Bradford
1999 Champion 203
1999 Mercury 225 EFI