Re: OMC speed question
thx for reply.
Distributor cap is brand new .
So is only oil change,new spark plug & wire will be required for tune up.is there any thing else i need to change.let me know.thank you
Also i guess engine is 3 lt so i will need to add 3 lt to engine.pls confirm.
Also they have some engine treatment available for car.can we use this in marine engine.let me know.thx
There should be threads on the dipstick tube that looks like a garden hose will screw on.Thats the best way to pump the oil out.
Use SAE 30 weight oil. Rotella oil sold in truck stops and auto parts stores is good.Not 10w-30 just straight 30 weight.
Spark plugs are probably AC MR43T or should be,
You need a Marine distributer cap.
Plug wires can be matched at the auto parts store.
You can use a drill pump and attach a piece of garden hose to it,
One like this,
http://www.sears.com/shc/s/p_10153_...& Pumps&psid=FROOGLE01&sid=IDx20070921x00003a
Warm the engine up first then suck the oil out.
All the parts you need for tune ups...
http://bpi.ebasicpower.com/pc/SMI98104___/OMC9K/Ignition+Wire+Set+Delco+OMC+EST+4+Cylinder
thx for reply.
Distributor cap is brand new .
So is only oil change,new spark plug & wire will be required for tune up.is there any thing else i need to change.let me know.thank you
Also i guess engine is 3 lt so i will need to add 3 lt to engine.pls confirm.
Also they have some engine treatment available for car.can we use this in marine engine.let me know.thx